Building Product Brochures & Datasheets

Coatings

Sikalastic 800 Series

The Sikalastic® 800 Series outlines a versatile range of polyurea coatings designed for applications such as waterproofing, abrasion resistance, and protective coatings. Details the series’ adaptability to market segments including infrastructure, marine vessels, commercial construction, and petrochemical processing.

Sealers

Cemcrete Sealers are transparent protective coatings. Protecting cement floors and walls with a good quality Cemcrete sealer is crucial and not only makes the surface easier to clean, but it also offers other benefits as well, such as enriching the colour intensity of the overlay, blocking the penetration of stains, and improving water repellency and abrasion resistance.

Thermoplastic Coating

Thermoplastic coating is a durable pigmented coating for walls, ceilings and roofs.

Cemcote

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

EIFS Basecoat

EIFS BaseCoat is a special mixture of various admixtures and Ordinary Portland Cement for repair of concrete and masonry, adhering and surfacing of EIFS Insulation boards prior to applying Cemcrete’s decorative coatings.

Superscreed

Superscreed is a thin high-strength screed. A 10-20mm high-strength, shrinkage compensated granolithic type screed mix.

Concrete Canvas

Concrete Canvas is part of a class of construction materials called Geosynthetic Cementitious Composite Mats (GCCMs). It is a flexible, concrete impregnated fabric that harden on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. It is used in channel lining, slope protection, bund lining, remediation of existing concrete structures, and culvert lining.

DecoCrete

DecoCrete Shapeable textured plaster. A coloured, cement-based material formulated to be plastered to excessive thicknesses but does not slide or shrink and dries rock-hard.

Wall products overview

Wall products overview by Cemcrete, for wall preparation, decorative finishes and sealing properties for longer lasting aesthetics.

RenoCrete

RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system.

Wall Renocrete

RenoCrete beautifies existing surfaces (wall, floor and other) while achieving good compressive, tensile and flexural strength.

PrimerCote

PrimerCote is a tough adhesive for new screeds, no dilution required, needs to be mixed with Cemcrete’s FlexBond and will ensure screed adheres to substrate.

CreteCote Microcement for walls

Cretecote is a pigmented, thin film cement-based wall & floor coating which is versatile & durable.

Colour Hardener Screed

Dry-shake Screed Colour Hardener – A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors.

CreteCote Floor Coating

CreteCote is a thin skim-on floor coating. A coloured, thin-film cement-based floor covering which is versatile and durable.

Floor Products

Cemcrete range of floor products for floor preparation, finishes, sealers and flooring maintenance. Product information overview for flooring.

CreteStain walls

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

Disposal of Treated Wood

Our guidance note on the disposal of treated wood, provided by the South African Wood Preservers Association (SAWPA), offers comprehensive information on handling and disposing of treated wood waste responsibly. Treated wood, protected from wood-boring insects and decay, is predominantly treated with coal tar creosote or waterborne copper-based preservatives like CCA.

Africote Colour Paint Palette | Internal & External Coatings - Signature Acrylic

Africote Colour Palette of Signature internal & external coatings for any mood, feature walls with accented tones, platinum velvet, sheen, liquid naturals and textured.

Waste Water Treatment Works

a.b.e. Construction Chemicals provides comprehensive solutions for wastewater treatment works, general construction, concrete repair and protection products.

SikaTop Seal-107 ZA

SikaTop® Seal-107 ZA is a versatile solution for waterproofing and protecting concrete structures. This two-part polymer-modified cementitious slurry consists of a liquid polymer and a mix of cement with special additives.

Exposed Aggregate Colour Chart

Introducing our Exposed Aggregate Colour Chart, a stunning array of natural textures meticulously curated to elevate any cementitious decorative aggregative coating. From the gentle tones of Sea Salt to the bold richness of Black Pepper, each hue, including Chia Seeds, Poppy Seed, Mustard, Cumin, and Caraway, offers a unique character and depth to your surface. This palette embodies the essence of nature, infusing your space with organic beauty and timeless elegance.

silvakote

silvakote is a single-pack solution, pigmented with aluminium and bitumen. It serves as a reflective aluminium paint suitable for metallic, most bituminous, and concrete surfaces. Its advantages include UV resistance, high reflectivity, and ease of application.

silvakote eco

silvakote eco is a liquid-applied, high-performance, highly elastomeric finishing coat enhanced with synthetic polymers and solar reflective properties. This environmentally friendly solution is both bitumen and solvent-free, making it safe for applicators. Designed as a green alternative to traditional solvent-based bitumen aluminium paints, silvakote eco is water-based and offers excellent environmental compatibility.

hydroproof

hydroproof offers an all-in-one system, eliminating the necessity for separate primers on porous surfaces. With excellent weathering properties, adhesion, and durability, hydroproof® is tough, flexible, and non-toxic. Choose from a wide array of colours to suit your needs.

Terra-Stone: Authentic Terrazzo

Terra-Stone is a technically advanced and chemically modified conglomerate tile, available in slimline full bodied Terrazzo with a nominal 600x600x20mm format. The tile is manufactured in a wide selection of standard colours. Architects and designers can, however, request custom mix designs at a small premium, depending on the quantity required.

Africote Paints & Coatings

We at Africote, strive to encapsulate this natural essence, by incorporating into our products the very ingredients, that Mother Earth continues to offer today, as she did then. In addition, Africote utilizes the latest modern coatings technology and an advanced manufacturing facility to produce a leading range of cementitious and conventional acrylic and enamel coatings. Africote employs experts in the areas of testing and developing new application systems and products. For the homeowner, designer or architect, who desires to add value to his or her residence or commercial building, whether for interior or exterior applications, Africote’s marketing team not only stands ready to assist with innovation and diversity, but also ensures that the same high level of service is offered at all levels, from the individual customer to project managers of large construction sites.

Africote Waterproofing Products

Africote Waterproofing Products – Platinum Waterproofing – Dual cementitious / acrylic based waterproof coating, Bitumen Aluminium – rust inhibitive coating, Fibreshield – with fibre, Watershield – without fibre

Pool Products | Cemcrete

Pool preparation products, decorative finishes and pool repair products.

Pool Coating | Brush-on cement-based pool paint | Cemcrete

Brush-on cement-based pool paint A cement-based coating which can be applied easily and quickly using a paint brush. Pool Coating is intended to revitalise your old, pitted, dirty pool plaster as an alternative to re-plastering. It must be noted that Pool Coating is a once-off application.

PoolCrete | White & Coloured Marble Pool Plaster

POOLCRETE White & coloured marble pool plaster A 6mm thick smooth plaster recommended for the interior plastering of walls and floors of swimming pools, which becomes a very hard integral part of the pool structure. Not for use above the water level.

Roofs | Cemcrete | Products for Roof Repair and Finishing

Roofs Repairs and Finishing, Roofseal, Thatchcrete, TPC Roof, Colour Range

Silicones, Sealants, Adhesives | a.b.e. | Product Selector

Silicones, sealants and adhesives for expansion and contraction joints, fire-resistant, sealing, glazing and other civil engineering works.

Thatchcrete | Cemcrete - cement lining for thatch roofs

Thatchcrete | Cemcrete – cement lining for thatch roofs, creating a thin, reinforced, waterproof, fire-resistant, cement lining to be applied directly.

TPC Roof | Cemcrete - colourful coating for roofs

TPC Roof | Cemcrete – colourful coating for roofs

Ceiling product overview | Cemcrete

A finely ground mixture of white Portland cement, pigments and chemicals.

CemBond | Cemcrete | Polymer based resin

Cemcrete’s Cembond is a polymer based resin or bonding liquid that is compatible with cement, lime, sand and gypsum and adheres to concrete, brick, tiles, cement, plaster and stone.

Direct-To-Metal Paint | Cemcrete | New or weathered metal paint

Direct-To-Metal Paint is a primer & topcoat in one. It is a high-performance metal primer & topcoat with anti-corrosive pigments that prevents rust.

Specialised Building Products | Cemcrete | Coatings, Repairs, Mortars

Specialised building products by Cemcrete is a variety of products for building needs from coatings to colourd mortar mix, to prep products and repairs.

TexCrete | Cemcrete | Fibre-cement casting mix

TexCrete is a fibre-cement casting mix A thixotropic, quick setting, enhanced fibre-cement blend. Mixed with a solution of FlexBond for the saturation and impregnation of CemForce to form a reinforced product that can be cast into latex or silicone moulds. Produces castings of about 4 to 8 mm in thickness.

Affordable Housing | Cemcrete | Cost-effective wall coatings

Cemcrete’s affordable housing cost-effective wall coatings for mass housing projects with one coat acrylic PVA Khozi Coat for interior and exterior surfaces

Thermoplastic Coating Datasheet

Thermoplastic Coating Datasheet tough, thermoplastic, textured, weatherproof coating. Contains Mica and silica for maximum film protection

Pool Coating Datasheet

Pool Coating Datasheet – A two-pack cement-based coating which can be applied easily and quickly using a paintbrush. Having a base of white Portland cement it sets rock hard, performs well underwater and can be repeatedly scrubbed if necessary. Because of its critical formulation, it has an excellent bond, flexural and tensile strength, good abrasion and chemical resistance and reduced drying shrinkage. It is non-hazardous and potable water can be stored in structures treated internally with it.

Stipplecrete | Cemcrete - direct to concrete and brick coating

StippleCrete provides an exceptionally long-lasting, weatherproof, economic coating for fair face brick-work or concrete in one coat.

Pool Crack Filler Datasheet | Cemcrete

pool crack filler datasheet – A heavily fibre-reinforced flexible paste which, after being allowed to dry, remains flexible under water.

CreteCote Datasheet | Cemcrete

CreteCote Datasheet CreteCote is a coloured, thin-film cement-based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish suitable for application onto wood or steel floated concrete floor slabs or screeds and is ideal for internal domestic applications. Comes complete with powder and catalyst in a twin pack.

Gripfoot Conformable

Gripfoot Conformable Anti-Slip Surface Tape, cleat or tiles. Its self-adhesive foiled backing allows for ‘rolling’ or ‘hammering’

TPC Roof Datasheet

TPC Roof Datasheet A tough, thermoplastic, weatherproof coating. Contains Mica and silica for maximum film protection against ultra-violet light and weather abrasion. Supplied ready for use. Application by brush or roller. SABS 2000 hour artificial weathering test report available on request.

CemWash Datasheet

CemWash Datasheet – A two-coat decorative, coloured, waterproof cement finish; supplied as CemWash first coat (grey) and CemWash topcoat (coloured). Having a base of Portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. It is supplied in powder form requiring the addition of a CemBond/water solution for the application of the CemWash first coat (grey) and clean water for the application of the CemWash topcoat (coloured). The purpose is to provide a tough, waterproof, durable cement-based coating directly to brick, block or hard cured plaster walls.

MultiPurpose Water-Based Sealer Datasheet | Cemcrete

MultiPurpose Water-Based Sealer Datasheet provides a tough, durable, flexible, clear coating on vertical surfaces of concrete, cement plaster and masonry.

Khozi Coat | Cemcrete - cost effective wall coatings

Cemcrete’s Khozi Coat is a one coat PVA acrylic paint suitable for interior and exterior surfaces. It is alkali resistant and is designed as a one-coat application for existing or newly plastered surfaces, cement bricks or building blocks.

SAWPA | Exterior Wood Finishes: Selection, Application, Maintenance and Renovation

Exterior surface coatings play an important role in the final steps of the manufacture or construction and later, in the maintenance and renovation of wooden objects and structures. The consumer expects a reasonable level of performance from these finishes. However, the performance and hence the selection of an acceptable finish for an exterior wooden structure or product is influenced by several factors. These include wood characteristics, environmental exposure conditions, appearance of the finished product as well as durability, cost, ease of application, maintenance and renovation or removal of the finish….

SAWPA | Sapwood and Heartwood

A tree trunk has three main zones; the bark, the sapwood and the heartwood. Trees are basically triangular in shape and they gain height by growing outwards and upwards. At the start of each growing season, a new layer is added to the outside of the wood so that every part of the tree gets bigger – roots, trunk, branches and twigs.

Natural Durability of Wood

An important consideration when building with timber is predicting how long the structure will last. Whilst insects, decay or rotting organisms and marine borers can all attack wood, some timber species have the ability to resist attack better than others. The natural durability of a species to resist attack by wood destroying organisms is an indication of how long that timber will last when it is exposed to a defined set of exposure conditions without any additional preservative protection. The natural durability of timber species varies, even so within the wood from the same species of tree, depending on whether its sapwood or heartwood.

Brochures & Datasheets



Copyright © 2025 New Media, a division of Media24. All rights reserved.