Building Product Brochures & Datasheets

Primer Paint

Screedbinder General Purpose Method Statement as a Primer

TAL – Screedbinder applied as a primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Primer Aggregate General Purpose

Primer Aggregate  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Primer Aggregate Graded Silica Sand for Mechanical Keying and Slip Resistance

TAL Primer Aggregate is high-quality well-graded silica sand.  It provides a mechanical key for resin flooring systems as well as cementitious screeds/toppings/underlayments. TAL Primer Aggregate is also used in conjunction with TAL resin flooring and coating systems to provide a slip resistant finish. Available in Fine (SQ1), Medium (SQ2) and Coarse (SQ3).

X-Tech EpoxyFloor SL1 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL1 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1 to 1.5mm thick.

X-Tech EpoxyFloor SL1 applied on to X-Prime MT100

TAL -X-Tech EpoxyFloor SL1 applied on to X-Prime MT100 application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech AntiStatic SLE applied to new concrete using X-Shield SF Primer or MT Primer

Method Statement on how to apply TAL X-Tech AntiStatic SLE to new concrete using X-Shield SF Primer or MT Primer.

X-Tech AntiStatic SLE Conductive epoxy flooring system

TAL – X-Tech AntiStatic SLE is a three layer system comprising an epoxy primer, a water dispersed epoxy base coat and a self smoothing epoxy top coat that produces a conductive or dissipative floor. The conductive grade (CG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. The dissipative grade (DG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

X-Tech AntiStatic SLB applied to new concrete using X-Shield WD Primer

Method Statement on how to apply TAL- X-Tech  AntiStatic SLB to new concrete using X-Shield WD Primer.

X-Roc Galzinc

X-Roc GalZinc is a single component zinc rich epoxy primer. As an anti-corrosion primer for reinforcing steel to extend the life of repairs made to reinforced concrete.

X-Tech UralFloor Ht, Screed Grade Applied to concrete

TAL X-Tech UralFloor Ht, Screed Grade application  to concrete  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.


Copyright © 2021 New Media, a division of Media24. All rights reserved.