CreteStain walls | Cemcrete | Acid-based cement / concrete stain
CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.
CemBond | Cemcrete | Polymer based resin
Cemcrete’s Cembond is a polymer based resin or bonding liquid that is compatible with cement, lime, sand and gypsum and adheres to concrete, brick, tiles, cement, plaster and stone.
PrimerCote | Cemcrete | Tough adhesive for new screeds
PrimerCote is a tough adhesive for new screeds, No dilution required, needs to be mixed with Cemcrete’s FlexBond, Will ensure screed adheres to substrate
Cemkey | Polymer-based bonding liquid | Cemcrete
CemKey contains a resin with exceptional adhesive qualities. It is a reliable general-purpose adhesive for the building and decorative industry. It replaces the water addition component of cement-based products and enhances the performance of these products.
CemBond Datasheet – contains resin with exceptional adhesive qualities. It has been proven over the past couple of decades to be a reliable general-purpose adhesive for the building and decorative industry.
Fusion Concrete look and feel, hybrid technology flooring
Fusion is a four component, self smoothing hybrid technology floor topping that produces a concrete look finish.
Screedbinder General Purpose Method Statement as a Primer
TAL – Screedbinder applied as a primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.
TAL Tile-To-Tile is a grey quick-setting high-strength cement-based adhesive specially formulated for fixing most types of tiles onto smooth and dense surfaces such as existing tiles, powerfloated screeds, etc. TAL Tile-To-Tile is suitable for fixing tiles to walls and floors, in interior and exterior applications. Priming of some substrates may not be required due to the superior adhesion properties of this product. The adhesive was designed for easy use, allowing a 4 hour pot life. TAL Tile-To-Tile should not be used with white or light-coloured porous natural stone tiles, where a grey adhesive may show through the tile in the form of ‘staining.
Goldfelx Ultra C2TFS2 Cement Based Adhesive
TAL GOLDFLEX ULTRA is a high strength, ultra flexible rapid setting grey cement based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for elevated flexibility and water resistance while maintaining ultra-tensile strength, usually only achieved by the addition of latex admixtures. The incorporation of dry-form polymers replaces the need for a latex bonding additive. Only clean water needs to be added, reducing mixing errors on site. It is suitable for using in all interior and exterior wall and floor applications and finds special use in fixing of glass tiles
TAL Goldstar 18 is a grey quick-setting high-strength cement based adhesive for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors. The adhesive was designed for easy use, allowing an 8 hour pot life. TAL Goldstar 18 can be applied in bed thicknesses between 3 – 6mm, and up to 12mm in isolated areas only.
TAL GOLDFLEX is a grey flexible rapid-setting high-strength shrinkage-compensated cement-based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for flexibility, water resistance and increased strength, usually only achieved by the addition of latex admixtures. Only clean water needs to be added, reducing mixing errors on site.
TAL PORCELAINFIX is a grey quick-setting high-strength shrinkage-compensated cement based adhesive for fixing porcelain tiles. It can also be used to fix other types of tiles. The adhesive was designed for easy use, allowing a 4 hour pot life.
X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.
BaseCoat – Paste is a special mixture of adhesives, fillers and plasticisers for mixing with ordinary Portland cement to obtain a controlled mixture for the repair of concrete and masonry, attaching and subsequent surfacing of polystyrene insulation boards prior to painting or finishing.
X-Tech EpoxyFloor TF applied to concrete
Method Statement on how to apply TAL- X-Tech EpoxyFloor TF to concrete.
TAL method statement on X-Shield BugFill, General Use and application
A modified latex-based additive for cementitious adhesives and grouts. Enhances the bond strength, flexibility and water resistance of the adhesive/grout when used as a total water replacement in the mix.
TAL PROFESSIONAL WHITE is a white (light-coloured) general-purpose standard-setting cement based powder adhesive especially formulated for fixing white and light coloured ceramic tiles which are susceptible to glaze discolouration due to moisture pull through (ie grey adhesive shows through the light-coloured body of the tile). TAL PROFESSIONAL WHITE can be used for ceramic wall and floor tiles and was designed for easy use, allowing up to 3 hours pot life after mixing.
TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1 1/2 hour pot life.
TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.
TAL GOLDSTAR 12 is a grey quick-setting high-strength cement-based adhesive for fixing porcelain, granite, dark-coloured marble and natural stone, ceramic, clay and terrazzo tiles to walls and floors. The adhesive was designed for easy use, allowing a 4 hour pot life.
TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.
AL GOLDSTAR 2 is a grey ultra-fast setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. TAL GOLDSTAR 2 is ideal for remedial work and tiling in doorways and passages, where access is required soon after tiling.
TAL STIX is a grey general-purpose cement based powder adhesive for fixing ceramic wall and floor tiles in interior and exterior installations, and was developed for the DIY market. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing.
TAL PORCELAINFIX is a grey quick-setting high-strength shrinkage-compensated cement based adhesive for fixing porcelain tiles. It can also be used to fix other types of tiles. The adhesive was designed for easy use, allowing a 4 hour pot life
