Building Product Brochures & Datasheets

Cement

Cemcote (Brushed) Datasheet

CemCote (Brushed) is a finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water on-site to produce a smooth, flowing coating which sets rock hard and is unaffected by UV light. CemCote can also be skimmed if a different finish is required. See CemCote (Skimmed) datasheet.

White Cement | Cemcrete | White Portland Cement

White cement is a hydraulic binder with physical characteristics corresponding to those of Portland grey cement. Pure white colour.

CreteStain walls | Cemcrete | Acid-based cement / concrete stain

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

CreteStain | Cemcrete | Acid-based cement / concrete stain

An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

CemCote Skimmed | Trowel-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

abe.®proof liquid membrane primer

abe.®proof liquid membrane primer is a single pack, solvent borne, liquid primer applied to most building substrates, this would include: abe.®proof liquid membrane primer can be used to prime most building substrates typically: • Porous surfaces, deficient bituminous surfaces, wood as well as sound concrete and non-porous screeds • A surface conditioner to obtain optimum performance from the products applied as top coats

abe® CEM-Blanc White Portland Cement

abe® CEM-blanc is a general purpose white Portland cement, specially manufactured to provide superior early strength with the added advantage of providing a wide range of aesthetic and decorative opportunities due to its key features of whiteness, high strength and durability. In addition to affording great design and colour versatility, abe® CEM-blanc complies fully with the requirements specified in SANS 50197-1 for type CEM II 42.SN cement.

Uniloc Range of Products

Union Tiles – Uniloc product catalogue

Union Tiles Unicemtex - Wall Coatings

Unicemtex is a weather resistant rustic cementitious wall coating for both interior or exterior use.

X-Tech StoneFlow Industrial grade rapid set self smoothing decorative screed

X-Tech StoneFlow is a cement based self smoothing heavy duty decorative industrial screeding system. It is shrinkage compensated and rapid setting. It is especially designed for use in industrial environments, on both new construction and renovation projects. It is designed for applications exposed to heavy traffic and abrasion, such as factories, warehouses and production areas. It is also suitable for commercial and residential applications.

X-Tech EpoxyFloor TF Abrasion and chemical resistant epoxy floor screed

X-Tech EpoxyFloor TF is a three component, trowel applied epoxy floor screed that produces an extremely dense, durable, abrasion and chemically resistant floor. A fast cure grade is available that can accept pedestrian traffic after 3h at 25C and vehicular traffic after 4h at 25C.

Screedmaster

TAL Screedmaster is a single-component high-performance self-levelling and smoothing Underlayment Compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates. Designed with high flow properties, when added to water it produces a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time.

Screedmaster Industrial

TAL Screedmaster Industrial is a single-component high-performance heavy-duty industrial self-levelling and smoothing Underlayment Compound, manufactured from rapid-setting shrinkage-compensated cement and selected aggregates. Designed with high flow properties, when added to water it produces a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time.

Rapidfix

TAL Rapidfix is a single-component high-performance Patching and Repair compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates specially designed for repairing of deteriorated concrete and mortar surfaces as well as patching holes in floor and wall surfaces.  It is a multi-purpose system designed to withstand heavy loading and trafficking in both industrial and domestic installations.  TAL Rapidfix can be applied to fill holes prior to installing floor coverings, underlayments or screeds, or can be left exposed in both high traffic industrial applications, ie: factories, and in domestic applications


Copyright © 2019 New Media, a division of Media24. All rights reserved.