Multi-Cell technical data sheet
A polymeric homogenous sheet bonded to form four-sided cells in a diamond shaped lattice pattern bordered by an external tensioning frame, Patent No. 2003/3945
This guideline provides the methods and procedures necessary for the correct installation of the Multi-Cell®. The installation of Multi-Cell® shall be in accordance with these methods and procedures, and the project drawings provided by the Engineer.
Sealmac Road Maintenance Systems
Sealmac® saturated with suitable bitumen effectively seals the existing pavement and reinforces the surface treatment by enhancing the performance of the seal. Sealmac® provides lower construction costs, lower maintenance costs, reduced overlay thickness and it prolongs fatigue life…
This glass fibre reinforced geogrid is designed to redirect crack stresses horizontally and dissipate the traffic induced stresses. Thus it helps retard cracks from reflecting through a new asphalt overlay to the surface. GlasGrid is a polymer coated woven glass fibre grid structure with a pressure sensitive adhesive for asphalt reinforcement.
Megaflo Geocomposite Panel Drain System
Megaflo has a formed invert at the bottom of the panel preventing loss of water into the base soils. It has an open waterway with little restriction from support legs for high flow rates. Megaflo has a high vertical crush strength allowing reduced cover depths even under highway applications.
RockGrid® PC is the first composite reinforcing geotextile to be manufactured in South Africa and offers the reinforcement characteristics of geogrids and wovens in conjunction with the favourable hydraulic qualities of nonwovens.
Multi-Cell® is a honeycombed structure that is manufactured from strips of a coated slit film woven polypropylene tape that are stitched alternatively together to form a three dimensional diamond shaped cells. Multi-Cell® is used as an in-situ shuttering to cast continuous interlocking concrete paving for road or canal construction and as an erosion control formwork for soil vegetated embankments. Multi-Cell® has been extensively used in the construction industry as a fast and effective solution to canal / channel protection, load support and erosion control.
The Quick4 Infiltrator™ chamber system is a direct replacement for the stone and pipe, stormwater and wastewater french drain soakaway. Infiltration™ chambers promote effluent infiltration into the soil with 100% efficiency.
Sealmac® is a nonwoven, spunbonded, continuous filament, double needlepunched, polyester geotextile. The Sealmac® Dam Lining System involves the saturation of Sealmac® with a special elastomeric bitumen product to produce an impermeable membrane. Numerous farm and municipal oxidation dams have also been successfully installed with this system since 1980.
Geotextiles used in the following applications: filtration, subsoil drainage, sportsfield drainage, structural drainage, erosion control, separation / stabilisation, railtracks, reinforcing soil slopes, liner protection, road maintenance…
Kaybion ® baskets and mattresses
Kaybion® baskets and mattresses are woven wire mesh containers manufactured from zinc-coated steel wire, with or without an additional PVC coating.
Concrete Canvas | Kaytech Geosynthetic Cementitious Composite Mats
Concrete Canvas is part of a class of construction materials called Geosynthetic Cementitious Composite Mats (GCCMs). It is a flexible, concrete impregnated fabric that harden on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. It is used in channel lining, slope protection, bund lining, remediation of existing concrete structures, and culvert lining.
Flodrain by Supplier Kaytech The ready-made solution to subsoil drainage. The FloDrain™ can be successfully used in the lowering of the water table or intercepting seepage in a wide range of applications: roadside edge drains, railtrack formation edge drainage, sportsfields, behind retaining walls and bridge abutments…
Kaypipe Geopipe | The engineer's solution to all drainage problems
Kaypipe geopipe, the engineers’ solution to all your drainage problems, fin drains, couplings, no other drainage pipes have an infiltration rate equivalent
The EnviroRock® containers are extremely robust and are designed to be filled with sand, soil, gravel, recycled material, treated materials, or a combination thereof to form a stable, durable container. These containers are manufactured using the patented 3PL, Envirotex, Georevet, or bidim depending on the requirements of the application. The versatility and durability of EnviroRock® containers provide solutions to structures such as groynes, walls, reef structures and other applications for marine and inland waterway structures. EnviroRock® containers are purpose-manufactured and available as: geobags – hand-filled from 40kg upwards Geocontainer® – hydraulically-filled larger containers up to 4 tons Pipe Support bags – pipe support plinths of various sizes filled with tailings, sand or soil
TenCate Geotube | Dewatering Systems
Geotube dewatering technology has become the method of choice for organisations around the world. Use at the water and wastewater treatment, mining and mineral processing, pulp and paper mills, power generation and environmental remediation.
Enviromat® is a locally produced and biodegradable erosion control blanket made from woodwool extracted from the alien Poplar tree. Used to combat soil erosion on exposed slopes, it stimulates vegetative growth while protecting topsoil and germinating seeds from the elements.
SoilSaver for erosion problems
SoilSaver for erosion problems, the ideal solution for stabilising and protecting ground surfaces from soil erosion. Made from woven 100% jute yarn, SoilSaver® features a coarse, 65% open mesh structure. This natural fibre mesh provides effective protection for bare soil against the elements, ensuring long-lasting stability and erosion control. Choose SoilSaver® for sustainable and reliable soil erosion management.
EnviroFIX – Needle-punched and thermally locked geosynthetic clay liner. Naturally occuring clay minera that swells as water enters between its platelets. The versatility and durability of EnviroRock® geocontainers provide solutions to structures such as groynes, walls, reef structures and other applications for marine and inland waterway structures.
Flo-Pipe ® drainage pipe | Kaytech geotextile engineering technology
Flo-Pipe ® drainage pipe is optimally slotted for maximum infiltration with minimal blockage. Fabricated from the highest quality HDPE available, the twin wall sandwich design provides strength and flexibility.
Geotextiles used in the following applications: filtration, subsoil drainage, sportsfield drainage, structural drainage, erosion control, separation / stabilisation, railtracks, reinforcing soil slopes, liner protection, road maintenance…
EnviroFIX – Needle-punched and thermally locked geosynthetic clay liner. Naturally occuring clay minera that swells as water enters between its platelets. The versatility and durability of EnviroRock® geocontainers provide solutions to structures such as groynes, walls, reef structures and other applications for marine and inland waterway structures.
The EnviroRock® containers are extremely robust and are designed to be filled with sand, soil, gravel, recycled material, treated materials, or a combination thereof to form a stable, durable container. These containers are manufactured using the patented 3PL, Envirotex, Georevet, or bidim depending on the requirements of the application. The versatility and durability of EnviroRock® containers provide solutions to structures such as groynes, walls, reef structures and other applications for marine and inland waterway structures. EnviroRock® containers are purpose-manufactured and available as: geobags – hand-filled from 40kg upwards Geocontainer® – hydraulically-filled larger containers up to 4 tons Pipe Support bags – pipe support plinths of various sizes filled with tailings, sand or soil
Kaybion ® baskets and mattresses
Kaybion® baskets and mattresses are woven wire mesh containers manufactured from zinc-coated steel wire, with or without an additional PVC coating.
RockGrid® PC is the first composite reinforcing geotextile to be manufactured in South Africa and offers the reinforcement characteristics of geogrids and wovens in conjunction with the favourable hydraulic qualities of nonwovens.
Multi-Cell® is a honeycombed structure that is manufactured from strips of a coated slit film woven polypropylene tape that are stitched alternatively together to form a three dimensional diamond shaped cells. Multi-Cell® is used as an in-situ shuttering to cast continuous interlocking concrete paving for road or canal construction and as an erosion control formwork for soil vegetated embankments. Multi-Cell® has been extensively used in the construction industry as a fast and effective solution to canal / channel protection, load support and erosion control.
Sealmac Road Maintenance Systems
Sealmac® saturated with suitable bitumen effectively seals the existing pavement and reinforces the surface treatment by enhancing the performance of the seal. Sealmac® provides lower construction costs, lower maintenance costs, reduced overlay thickness and it prolongs fatigue life…
Sealmac® is a nonwoven, spunbonded, continuous filament, double needlepunched, polyester geotextile. The Sealmac® Dam Lining System involves the saturation of Sealmac® with a special elastomeric bitumen product to produce an impermeable membrane. Numerous farm and municipal oxidation dams have also been successfully installed with this system since 1980.
This glass fibre reinforced geogrid is designed to redirect crack stresses horizontally and dissipate the traffic induced stresses. Thus it helps retard cracks from reflecting through a new asphalt overlay to the surface. GlasGrid is a polymer coated woven glass fibre grid structure with a pressure sensitive adhesive for asphalt reinforcement.
Concrete Canvas | Kaytech Geosynthetic Cementitious Composite Mats
Concrete Canvas is part of a class of construction materials called Geosynthetic Cementitious Composite Mats (GCCMs). It is a flexible, concrete impregnated fabric that harden on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. It is used in channel lining, slope protection, bund lining, remediation of existing concrete structures, and culvert lining.
TenCate Geotube | Dewatering Systems
Geotube dewatering technology has become the method of choice for organisations around the world. Use at the water and wastewater treatment, mining and mineral processing, pulp and paper mills, power generation and environmental remediation.
Flodrain by Supplier Kaytech The ready-made solution to subsoil drainage. The FloDrain™ can be successfully used in the lowering of the water table or intercepting seepage in a wide range of applications: roadside edge drains, railtrack formation edge drainage, sportsfields, behind retaining walls and bridge abutments…
Flo-Pipe ® drainage pipe | Kaytech geotextile engineering technology
Flo-Pipe ® drainage pipe is optimally slotted for maximum infiltration with minimal blockage. Fabricated from the highest quality HDPE available, the twin wall sandwich design provides strength and flexibility.
Megaflo Geocomposite Panel Drain System
Megaflo has a formed invert at the bottom of the panel preventing loss of water into the base soils. It has an open waterway with little restriction from support legs for high flow rates. Megaflo has a high vertical crush strength allowing reduced cover depths even under highway applications.
The Quick4 Infiltrator™ chamber system is a direct replacement for the stone and pipe, stormwater and wastewater french drain soakaway. Infiltration™ chambers promote effluent infiltration into the soil with 100% efficiency.
SoilSaver for erosion problems
SoilSaver for erosion problems, the ideal solution for stabilising and protecting ground surfaces from soil erosion. Made from woven 100% jute yarn, SoilSaver® features a coarse, 65% open mesh structure. This natural fibre mesh provides effective protection for bare soil against the elements, ensuring long-lasting stability and erosion control. Choose SoilSaver® for sustainable and reliable soil erosion management.
Enviromat® is a locally produced and biodegradable erosion control blanket made from woodwool extracted from the alien Poplar tree. Used to combat soil erosion on exposed slopes, it stimulates vegetative growth while protecting topsoil and germinating seeds from the elements.