A cement-based coating which can be applied easily and quickly using a paint brush. Pool Coating is intended to revitalise your old, pitted, dirty pool plaster as an alternative to re-plastering. It must be noted that Pool Coating is a once-off application.
Specifications
| Suitable Surfaces | Old, dirty pool plaster that has been acid-washed. Not for application to oil paint, plaster paint, new cement surfaces, fibreglass or new pool plaster. |
| Finish | Smooth – Slight brush/roller texture |
| Thickness | 1.5mm |
| Application | Brush and/or roller |
| Packaging | 15kg twin pack |
| Coverage | Approximately 25m² per 15kg twin pack |
| Curing | The completed work should be air cured for 6 days before filling the pool with water. Any rainwater that does fall during this period should be immediately removed from the pool. Allow an extra day’s air curing for each day of rain during the six-day curing period. Filling of the pool – See Pool Coating Start-Up Guide |
| Colour/s | Available in 6 colours |
Intended for use with
None
Tools needed
Block brush
Wire-brush
Rounded pool trowel
Supporting Cemcrete Products
Pool Crack Filler
Pool Sealer
Pool Patching
Q: Can Pool Coating be used on old fibreglass swimming pools?
A: No. It can only be used on old (older than 9 months) marble plastered swimming pools that have never been painted before.
Q: Can Pool Coating be used on a new concrete swimming pool instead of applying PoolCrete?
A: No. Pool Coating can only be applied to pool plaster that has cured for at least 9 months
Q: How long will Pool Coating last?
A: 3 – 4 years depending on how well the pool is maintained. Some have even lasted as long as 7-8 years.
Q: Can I re-paint over existing Pool Coating?
A: No. Generally, a swimming pool can only be painted once. The previous coats of paint have penetrated the pores of the plaster and traces of this remain tightly bonded within these pores closing them up and thus restricting the porosity needed for the ‘new’ paint to bond. We recommend that a swimming pool is only to be painted once. If further renovations are then required your option is to re-plaster the swimming pool using PoolCrete.
Q: Can I use the same chemicals that I used in my marble plaster based pool?
A: Yes you may. But once again avoid the use of copper sulphate based chemicals.
Q: When can I introduce the automatic pool cleaner into the pool?
A: 21 days after the pool has been filled.
Pool Coating | Brush-on cement-based pool paint | Cemcrete
Brush-on cement-based pool paint A cement-based coating which can be applied easily and quickly using a paint brush. Pool Coating is intended to revitalise your old, pitted, dirty pool plaster as an alternative to re-plastering. It must be noted that Pool Coating is a once-off application.