Tile Fixing

WEBER.SET CERAMICS

Weber.set Ceramic S is a cement-based thin to thick (3-20 mm) bed, tile adhesive for the fixing of Ceramic, Stone, Brick and Clay tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.

Features and Benefits

• 24-hour set
• Interior and exterior application
• Suitable for wall and floor
• Can be applied up to 20 mm thick
• Anti-slip properties
• Can be used on a wide range of surfaces
• Consistent quality – ISO 9001 and 14001 accredited manufacturer

Technical Data

• Initial setting time: approximately 12 hours
• Final setting time: approximately 24 hours
• Correction time: approximately 20 minutes
• Open time: approximately 20 minutes
• Pot life: approximately 8 hours
• Grouting time: approximately 24 hours
• Water demand: approximately 5 litres per 20 kg
• Temperature resistance: 70°C
• Application temperatures: Do not apply in temperatures below 5°C or above 30°C

Note: all the data given was obtained at a temperature of 23°C and 50% relative humidity

Areas of Application

weber.set Ceramic S is suitable for fixing Ceramic, Stone, Brick and Clay tiles to cement plaster, screeds and concrete surfaces.
• Suitable for interior and exterior use
• Suitable for use on walls and floors
• Do not use this product on white or light coloured Marble or porous Porcelain tiles, as it might cause discolouration of the tiles. weber.set White is recommended for this purpose. weber.set Ceramic S is suitable for use on surfaces like:
• Cement-based plaster
• Cement screeds
• Concrete surfaces

WEBER.SET CERAMIC L

Weber.set Ceramic L is a cement-based, thin to thick (3-20 mm) bed tile adhesive for the fixing of Ceramic, Clay, Cement and Natural Stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.

Features and Benefits

• 24-hour set
• Interior and exterior application
• Suitable for wall and floor use
• Can be applied up to 20 mm thick
• Anti-slip properties
• Can be used on a wide-range of surfaces
• Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
• Initial setting time: approximately 12 hours
• Final setting time: approximately 24 hours
• Correction time: approximately 20 minutes
• Open time: approximately 20 minutes
• Pot life: approximately 8 hours
• Grouting time: approximately 24 hours
• Water demand: approximately 5 litres per 20 kg
• Temperature resistance: 70°C
• Application temperatures: Do not apply in temperatures below 5°C or above 30°C

Note: all the data given was obtained at a temperature of 23°C and 50% relative humidity

Areas of Application

weber.set Ceramic L is suitable for fixing Ceramic, Clay, Cement and Natural Stone tiles to cement plaster, screeds, concrete and other pre-primed surfaces.
• Suitable for interior and exterior use
• Suitable for use on walls and floors
• Do not use this product on white or light coloured Marble or porous Porcelain tiles, as it might cause discolouration of the tiles. weber.set White is recommended for this purpose.
weber.set Ceramic L is suitable for use on surfaces like:
• Cement-based plaster
• Cement screeds
• Concrete surfaces
• Other primed surfaces

WEBER.SET CERAMIC WHITE

Weber.set Ceramic White is a cement-based, thin to thick (3 – 20 mm) bed tile adhesive for the fixing of Ceramic, Clay, Cement and Natural Stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.

Features and Benefits

• Suitable for light-coloured and porous Ceramic tiles
• 24-hour set
• Interior and exterior application
• Anti-slip properties
• Suitable for wall and floor use
• Can be used on a wide-range of surfaces Consistent quality – ISO 9001 and 14001 accredited manufacturer

Techincal Data

• Initial setting time: approximately 12 hours
• Final setting time: approximately 24 hours
• Correction time: approximately 20 minutes
• Open time: approximately 20 minutes
• Pot life: approximately 8 hours
• Grouting time: approximately 24 hours
• Water demand: 5 litres per 20 kg
• Temperature resistance: 70°C
• Application temperatures: Do not apply in temperatures below 5°C or above 30°C

Note: all the data given was obtained at a temperature of 23°C and 50% relative humidity

Areas of Application

weber.set Ceramic White is suitable for fixing Ceramic, Clay, Cement and Natural Stone tiles to cement plaster, screeds, concrete and other pre-primed surfaces.
• Suitable for interior and exterior use
• Suitable for use on walls and floors

Weber.set Ceramic White is suitable for use on surfaces like:

• Cement-based plaster
• Cement screeds
• Concrete surfaces
• Other primed surfaces

Grouts

Premixed Adhesives

Standard Adhesives

Technical Adhesives

Weber.fix Super Flex

Weber.grout Acid Resistant

Weber.grout Quarry Tile

Weber.grout Tile Grout

Weber.set Ceramic S

Weber.set Ceramic White

Weber.set Mosaic Fix

Weber.set Porcelain Rapid 12

Weber.set Porcelain S

Weber.set Quick Set 6

Weber.set Ultra Flex

Weber-set White

Weber.set Ceramic L

WEBER.FIX SUPER-FLEX

Weber.fix Super-flex is a high-strength, ready-mixed, thin bed paste tile adhesive for the fixing of Ceramic, Porcelain, Natural Stone, Brick and Clay tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it is supplied ready to use.
Features and Benefits
  • Ready mixed 
  • Can be used on a wide range of surfaces 
  • Suitable for interior and exterior use 
  • High strength 
  • Anti-slip properties 
  • 24 hour setting time
Technical Data
  • Initial setting time: approximately 6 hours 
  • Final setting time – porous surface : approximately 24 hours 
  • Final setting time – non-porous surface: approximately 48 hours 
  • Correction time: approximately 25 to 35 minutes 
  • Open time: approximately 25 minutes 
  • Pot life: approximately 4 hours 
  • Grouting time: approximately 24 to 48 hours 
  • Temperature resistance: 8°C to 30°C during application, up to 100°C when set 
  • Application temperatures: Do not apply in temperatures below 8°C or above 30°C
Note: All the data given was obtained at temperatures of 23°C and 50% relative humidity
Areas of Application
 
Weber.fix Super-flex is suitable for fixing ceramic, porcelain, natural stone, brick and clay tiles to cement plaster, screeds and concrete, chipped and primed plaster and primed fibre cement surfaces.
  • Suitable for interior and exterior use 
  • Suitable for use on walls and floors 
  • Suitable for thin bed application 
  • Suitable for areas where low moisture occurs
WEBER.SET PORCELAIN S

Weber.set Porcelain S is a cement-based, thick and thin ( 3 – 20 mm) bed tile adhesive for the fixing of Porcelain, Ceramic, Clay, and Cement tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.

Features and Benefits
  • 24-hour set 
  • Interior and exterior application 
  • Can be applied up to 20 mm thick 
  • Easy to mix and apply 
  • Anti-slip properties 
  • Suitable for wall and floor use 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 12 hours 
  • Final setting time: approximately 24 hours 
  • Correction time: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 8 hours 
  • Grouting time: approximately 24 hours 
  • Water demand: approximately 5 litres per 20 kg 
  • Temperature resistance: 70ºC 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity
Areas of Application
Weber.set Porcelain S is suitable for fixing Porcelain, Ceramic, Clay, and Cement tiles to cement plaster, screeds, concrete and other pre-primed surfaces.
  • Suitable for interior and exterior use 
  • Suitable for use on walls and floors 
  • Do not use this product on white or light coloured marble or porous porcelain tiles as it might cause discolouration of the tiles. weber.set White is recommended for this purpose. 

Weber.set Porcelain S is suitable for use on surfaces like: 

  • Cement-based plaster 
  • Cement screeds 
  • Concrete surfaces 
  • Primed fibre-cement surfaces
WEBER.SET PORCELAIN L
 
Weber.set Porcelain L is a cement-based high strength, thick and thin (3 – 20 mm) bed tile adhesive for the fixing of Porcelain, Ceramic, Clay and Cement tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • 24-hour set 
  • Interior and exterior application 
  • Can be applied up to 20 mm thick 
  • Easy to mix and apply 
  • Anti-slip properties 
  • Suitable for wall and floor use 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 12 hours 
  • Final setting time: approximately 24 hours 
  • Correction time: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 8 hours 
  • Grouting time: approximately 24 hours 
  • Water demand: approximately 5 litres per 20 kg 
  • Temperature resistance: 70ºC 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity.
 
Areas of Application
 
Weber.set Porcelain L is suitable for fixing Porcelain, Ceramic, Clay and Cement tiles to cement plaster, screeds, concrete and other pre-primed surfaces.
  • Suitable for interior and exterior use 
  • Suitable for use on walls and floors 
  • Do not use this product on white or light coloured marble or porous porcelain tiles as it might cause discolouration of the tiles. Weber.set White is recommended for this purpose. 
Weber.set Porcelain L is suitable for use on surfaces like:
  • Cement-based plaster 
  • Cement screeds 
  • Concrete surfaces 
  • Primed fibre-cement surfaces
WEBER.SET PORCELAIN RAPID 12
Weber.set Porcelain Rapid 12 is a cement-based high strength, thick and thin (3 – 20 mm) bed tile adhesive for the fixing of Porcelain, Ceramic, Clay, Brick, Cement and Natural Stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • 12-hour set 
  • Interior and exterior application 
  • Can be applied up to 20 mm thick 
  • Anti-slip properties 
  • Suitable for wall and floor use 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 4 hours 
  • Final setting time: approximately 12 hours 
  • Correction time: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 2 hours 
  • Grouting time: approximately 12 hours 
  • Water demand: approximately 5 litres per 20 kg 
  • Temperature resistance: 70ºC 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity
Areas of Application
 
Weber.set Porcelain Rapid 12 is suitable for fixing Porcelain, Ceramic, Clay, Cement, Natural Stone tiles to cement plaster, screeds, concrete and other pre-primed surfaces.
  • Suitable for interior and exterior use 
  • Suitable for use on walls and floors 
  • Do not use this product on white or light coloured marble or porous porcelain tiles as it might cause discolouration of the tiles. weber.set White is recommended for this purpose. 
Weber.set Porcelain Rapid 12 is suitable for use on surfaces like:
  • Cement-based plaster 
  • Cement screeds 
  • Concrete surfaces 
  • Primed fibre-cement surfaces
WEBER.SET QUICK SET 6
 
Weber.set Quick Set 6 is a cement-based, high strength, quick-set, thick to thin (3-20 mm) bed tile adhesive for the fixing of Porcelain, Ceramic, Brick, Clay, Cement and Natural Stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • 6-hour set 
  • Interior and exterior application 
  • Suitable for Ceramic, Porcelain, Brick, Clay, Cement and Natural Stone tiles 
  • Easy to mix and apply 
  • Suitable for wall and floor use 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 3 hours 
  • Final setting time: approximately 6 hours 
  • Correction time: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 1 hours 
  • Grouting time: approximately 6 hours 
  • Water demand: approximately 5 litres per 20 kg 
  • Temperature resistance: 70ºC Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity
 
Areas of Application
Weber.set Quick Set 6 is suitable for fixing Porcelain, Ceramic, Brick, Clay, Cement and Natural Stone tiles to cement plaster, screeds, concrete and primed fibre cement surfaces.
  • Suitable for interior and exterior use 
  • Suitable for use on walls and floors 
  • The 6-hour set makes it ideal for quick installations
  • Do not use this product on white or light coloured marble or porous porcelain tiles as it might cause discolouration of the tiles. Weber.set White is recommended for this purpose. 
Weber.set Quick Set 6 is suitable for use on surfaces like:
  • Cement-based plaster 
  • Cement screeds 
  • Concrete surfaces 
  • Primed fibre cement surfaces
WEBER.SET ULTRA-FLEX
Weber.set Ultra-flex is a highly deformable, high strength, rapid-set cement-based tile adhesive for wall and floor applications. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • 6-hour set 
  • Adhesive designed to absorb lateral movement 
  • Interior and exterior application 
  • Can be applied up to 20 mm thick 
  • Suitable for wall and floor use 
  • Suitable for use with under floor heating 
  • Suitable for tiling over timber flooring and existing Ceramic and Porcelain tiles 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 3 hours 
  • Final setting time: approximately 6 hours 
  • Correction time: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 1 hour 
  • Grouting time: approximately 6 hours 
  • Water demand: approximately 5 litres per 20 kg 
  • Temperature resistance: 70º 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity
 
Areas of Application
 
Weber.set Ultra-flex is used for fixing Porcelain, dark Marble, Granite, Ceramic, Stone, Brick and Clay tiles.
  • Suitable for walls and floors 
  • Suitable for interior and exterior use 
  • Do not use this product on white or light coloured Marble or porous Porcelain tiles, as it might cause discolouration of the tiles. weber.set White is recommended for this purpose. 
  • The 6 hour set makes it ideal for quick installations. 
It is most suitable for levelling and repairing surfaces with depressions up to 8 mm before applying tiles.
Weber.set Ultra-flex ensures a flexible bed on critical surfaces like:
  • Pre-cast concrete 
  • Post tensioned floors
  •  Heated screed 
  • Tile on tile applications 
  • Power-floated floors
WEBER.SET WHITE
 
weber.set White is a white cement-based high strength, rapid set, thin to thick bed (3-20 mm) tile adhesive for the fixing of crystalline Marble tiles, coarse crystalline natural stones, light coloured polished Porcelain and Ceramic tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • 6-hour set 
  • Interior and exterior application 
  • Can be applied up to 20 mm thick 
  • Does not discolour marble and other light-coloured tiles 
  • Suitable for wall and floor use 
  • Adhesive designed to absorb some lateral movement 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 3 hours 
  • Final setting time: approximately 6 hours 
  • Correction time Glazed tiles: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 1 hour 
  • Grouting time: approximately 6 hours 
  • Water demand: approximately 5 litres per 20 kg 
  • Temperature resistance: 70ºC 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity
 
Areas of Application
  • Weber.set White is suitable for fixing crystalline Marble tiles, coarse crystalline natural stone, light coloured polished Porcelain and Ceramic tiles to cement plaster, screeds, concrete and primed fibre cement surfaces. 
  • Suitable for interior and exterior use 
  • Suitable for use on walls and floors 
  • The 6 hour set makes it ideal for quick installations 
Weber.set White is suitable for use on surfaces like: 
  • Cement-based plaster 
  • Cement screeds 
  • Concrete surfaces 
  • Other primed surfaces
WEBER.SET MOSAIC FIX
 
weber.set Mosaic-Fix is a white cement-based adhesive and grout for the fixing and grouting of mosaic. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • 24-hour set 
  • Interior and exterior application 
  • Suitable for use in swimming pools and shower cubicles 
  • Suitable for wall and floor use 
  • Adhesive designed to absorb lateral movement 
  • Consistent quality – ISO 9001 and 14001 accredited manufacturer
Technical Data
  • Initial setting time: approximately 12 hours 
  • Final setting time: approximately 24 hours 
  • Correction time: approximately 20 minutes 
  • Open time: approximately 20 minutes 
  • Pot life: approximately 8 hours 
  • Grouting time: approximately 24 hours 
  • Water demand: approximately 6.5 litres per 20 kg 
  • Temperature resistance: 70ºC 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity
 
Areas of Application
Weber.set Mosaic-Fix is used for fixing and grouting of Glass-, Porcelain-, Marble-, Ceramic mosaics.
Suitable for fixing of mosaics in swimming pools
Suitable for interior and exterior use
Suitable for shower cubicles
Weber.set Mosaic-Fix is suitable for use on surfaces like:
  • Cement based plaster 
  • Screeds and concrete 
  • Primed fibre cement surface 
  • Primed gypsum walls 
  • Primed timber surface 
  • Primed ceramic tiles 
  • Gunite or hand packed cement surfaces as found in the swimming pools

WEBER.GROUT ACID-RESISTANT WB235


Weber.grout Acid-resistant Grout WB235 is a cement-based chemical resistant grout designed to point tile joints (4 -15 mm) on walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • Exceptional and consistent quality 
  • Suitable for areas where acid- and chemical attacks may occur 
  • Suitable for joint widths up to 14 mm 
  • Can be used in conjunction with under-tile heating 
  • Limited flexibility to accommodate some movement
Technical Data
  • Joint width: 4 mm to 15 mm 
  • Pot life: approximately 45 minutes 
  • Final drying time: 90 minutes at 20ºC and 50% humidity 
  • Water demand: 1.35 litres per 5 kg 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: all the data given was obtained at a temperature of 20ºC and 50% relative humidity
 
Areas of Application
For grouting joints between tiles:
  • Suitable for walls and floors 
  • Suitable for interior and exterior use 
  • Suitable for areas where acid and chemical attacks may occur 
  • Used in industrial kitchens, butcheries, dairies abattoirs and restaurants
WEBER.GROUT QUARRY TILE GROUT WB135
 
Weber.grout Quarry Tile Grout WB135 is a cement-based grout designed to point quarry tile joints (4 – 15 mm) on walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • Exceptional and consistent quality 
  • Suitable for walls and floors 
  • Suitable for joint widths up to 15 mm 
  • Can be used in conjunction with under-tile heating 
  • Limited flexibility to accommodate some movement
Technical Data
  • Joint width: 4 to 15mm 
  • Pot life: 3 hours 
  • Final drying time: 24 hours at 20ºC and 50% humidity 
  • Water demand: 4 litres per 20kg 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: All the data given was obtained at a temperature of 20ºC and 50% relative humidity
 
Areas of Application
For grouting joints between quarry tiles:
  • Suitable for walls and floors 
  • Suitable for interior and exterior use 
  • Suitable for intermittently wet and dry conditions 
  • Used in industrial kitchens, bathrooms and showers
WEBER.GROUT TILE GROUT WB33
Weber.grout Tile Grout WB33 is a cement-based grout designed to point tile joints (2 – 8 mm) on walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Features and Benefits
  • Exceptional and consistent quality 
  • Suitable for areas that will be dry or intermittently wet 
  • Suitable for joint widths up to 8 mm 
  • Can be used in conjunction with under-tile heating 
  • Limited flexibility to accommodate some movement 
  • Available in a range of colours
Technical Data
  • Joint width: 2 mm to 8 mm 
  • Pot life: 90 minutes 
  • Final drying time: 24 hours at 20ºC and 50% humidity 
  • Water demand: 1.35 litres per 5 kg 
  • Application temperatures: Do not apply in temperatures below 5ºC or above 30ºC 
Note: All the data given was obtained at a temperature of 20ºC and 50% relative humidity
 
Areas of Application
 
For grouting joints between tiles:
  • Suitable for walls and floors 
  • Suitable for interior and exterior use 
  • Suitable for intermittently wet and dry conditions 
  • Used in kitchens, bathrooms and showers