I will

  • Share

Transit Floor Coverings

0861 TRANSIT (8726748)

Manufacturer of Transit PVC raised studded non-static floor tiles and matching stair treads, as well as Stair Trim which can be fitted to the edges of stairs, whether they are on the inside, against a wall or on the open side of the stair. While designed to be used with the Transit Tread a specifically designed stair-covering tile the Stair Trim edging system can be fitted to stairs when using most other coverings. Conductive tiles are available for electronically sensitive areas. Flooring for commercial, industrial, laboratory as well as domestic applications.

Brochures / Datasheets

Transit Floor Covering Cleaning Instructions

These tiles have been made using a special formulation of PVC, designed to give your floor many years of service. With the regular implementation of these guidelines and simple cleaning routine, you can keep your Transit Tiles looking good for all those years to come. Depending on the nature of your installation, certain of the suggested weekly maintenance procedures may need to be performed more than once a week, according to the requirements of the area in use.

ESD Conductive Test Results

VR test results for transit conductive/esd floor tiles.

Transit Floor Covering | Laying Instructions for Transit Conductive Floor Tiles

The best possible tiles will not give satisfactory service without careful preparation of the underlying floor and the correct type of adhesive. It is vital that the floor should be clean, dry and level, without trace of dust, wax, grease, oil, solvents etc.

Transit Floor Covering Laying Instructions

The best possible tiles will not give satisfactory service without careful preparation of the underlying floor and the correct type of adhesive. It is vital that the floor should be clean, dry and level, without trace of dust, wax, grease, oil, solvents etc. Sheets of plywood or hardboard, at least 4mm thick, can be used to cover wooden floors prior to the laying of the tiles. Boards should be fixed with screws, counter sunk or serrated nails at approximately 150mm intervals over the face and approximately 100mm intervals along the edges. Moisture content of screed must not exceed 3%. This should be checked prior to installation. If in doubt consult adhesive manufacturers.

Recommended Adhesives for the Installation of Transit Products

A list of recommended adhesives that should be used when installing Transit Products.

Transit Floor Covering Studded PVC Floor Tiles

Made from 100% virgin PVC according to a unique formulation, Transit Tiles are engineered to offer: Exceptional durability, Superior chemical & abrasion resistance, Anti-static & Anti-slip, Impervious to most oils and acids, Easy to clean, Quiet, comfortable & warm underfoot, Fully recyclable, Easy to install with minimal wastage, 6 different designs, 11 standard colours, Electro-static dissipative / Conductive tiles also available, Custom colouring available for orders in excess of 300m2. Transit floor tiles are the ideal heavy-traffic flooring solution for commercial, educational, government, industrial and domestic applications.

Transit is still the BEST!

Transit Floor Coverings, PVC Floor Tiles, Non-Slip, Reasons to use Transit Floor Tiles

Transit Floor Covering Vinyl Floor Tiles

Transit Tiles and Transit Tread are eminently suitable for flooring and wall covering in industrial, commercial and domestic environments since they are attractive, hard and long-wearing, non-slip, resistant to the toughest treatments and low on maintenance.

Transit Floor Covering

3 Bundo Road
Johannesburg
Gauteng
South Africa
1610

  • Quick links:

www.transittiles.com

© 2019 Transit Floor Covering. Portal powered by Specifile®.


Copyright © 2019 New Media, a division of Media24. All rights reserved.