Building Solutions - Waterproofing Systems

TAL Superflex

A ready to use acrylic-based liquid waterproofing system which may be applied by brush or paint roller, suitable for waterproofing shower recesses, internal wet areas, external decks, swimming pools and water features when covered with tiles, as well as non-trafficable roof slabs and parapet walls, It cures to provide a flexible, waterproof membrane capable of accommodating normal structural movement in the background. Must be used in conjunction with TAL SUPERFLEX MEMBRANE. Tiles may be applied directly onto the cured TAL SUPERFLEX using an appropriate TAL adhesive system.
Approximate Coverage: 2L / m² for both coats
Pack size: 5L and 25L
Advantages
  • Easy to apply
  • One component, no mixing of numerous products
  • Water based, no solvent hazard
  • Lightweight
  • Excellent adhesion to most substrates after correct surface preparation
  • Is not affected by ponding water when fully cured, ie will not re-emulsify
  • Flexible  moves with the structure in normal expansion and contraction conditions
  • Seamless  no weak joints or seams
  • UV resistant – good resistance to ageing
  • Simple to repair in the event of damage
  • Available in White, Grey and Beige
TAL Sureproof
A tough, flexible and seamless rapid-drying two-part liquid-applied waterproofing membrane. It is suitable for waterproofing shower recesses, internal wet areas, external decks, planter boxes, roof slabs, swimming pools and water features when covered with tiles or decorative coatings/toppings. Applied by block brush or short hair enamel paint roller, TAL SUREPROOF possesses excellent flexibility and UV resistance which allows it to be left exposed on non-trafficable roof slabs and parapets walls. TAL SUREPROOF MEMBRANE must be used as reinforcing in all internal corners and interfaces, coving areas, around drains, etc. Tiles may be applied directly onto the cured TAL SUREPROOF using an appropriate TAL adhesive system.
Approximate Coverage: 10 – 12m² / 20kg kit
Pack size: 20kg kit
X-Calibur X-Pruf Crystalcoat
 
X-CALIBUR X-PRUF CRYSTALCOAT is an one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure.
Advantages
  • Penetrates concrete, seals capillaries and hairline cracks
  • Withstands positive and negative hydrostatic pressure
  • Suitable for use with potable wate
  • Easy to apply
  • Can be used on damp concrete
  • Crystals continue to grow until cracks are sealed
  • Chloride free
  • Allows concrete to breath
  • No odor
X-Calibur X-Pruf SBE
 
X-CALIBUR X-PRUF SBE is a solvent free bitumen emulsion containing wetting and thixotropic agents.
Advantages
  • Easy to apply
  • Cost effective
  • Solvent free
  • High build
  • Environmentally friendly
  • Resists chloride and sulfate penetration
X-Calibure X-Stop HWS Waterstops
 
X-CALIBUR X-STOP HWS hydrophilic waterstops are swellable waterstops developed for use in construction joints. X-Stop HWS are hydrophilic composites developed to perform in saline, potable and ground water conditions.
Advantages
  • Easy to install
  • Easy to join
  • High swell
  • Works in saline conditions
  • Works in contaminated ground water
  • Non toxic
X-Calibur X-Stop PVC Waterstops
 
X-CALIBUR X-STOP PVC Waterstops are manufactured from a high quality virgin PVC compound which has been formulated to give excellent flexibility and durability. They are extruded in a range of profiles.
Advantages
  • Proven design
  • 4 Diamond bulbs act in compression and extension
  • Deep rib tortuous path provides better bond to concrete and watertightness
  • Wide expansion bulb enables joint fillers to be fully supported
  • Flexible to accommodate movement
  • Reinforced eyelet edge flanges for positive fixing
  • Simple job site splicing
  • Full range of intersection pieces
  • Suitable for use in potable water structures

TAL Waterproofing Systems