• Recommendations:

Search results for

stone walls

Brochures & Datasheets

Waterproofing Products | a.b.e Construction Chemicals

a.b.e.® Construction Chemicals‘ range of waterproofing products and systems include specialised bituminous sheets, liquids, putties, cementitious based products and silanes. Bituminous sheet products are used to waterproof flat roofs, basement walls and to line earth dams and canals. Liquid systems and putties including acrylics, solvent-based bitumens and water-based rubberised acrylic modified bitumens which are used to seal parapet walls, small flat roofs, roof bolts, flashings and ponds. Cementitious slurry products are used to waterproof basements, foundations, tunnels, retaining walls, brickwalls and other underground structures. The silane systems are used to prevent water penetration of brick and natural stone.

Goldstar 18

TAL Goldstar 18 is a grey quick-setting high-strength cement based adhesive for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors. The adhesive was designed for easy use, allowing an 8 hour pot life. TAL Goldstar 18 can be applied in bed thicknesses between 3 – 6mm, and up to 12mm in isolated areas only.

Colour Hardener Sealer | Cemcrete

A non-yellowing clear, thermoplastic acrylic lacquer-based resin which displays excellent UV stability. Has very fast solvent release, i.e. drying properties. The sealer greatly enhances the colour and protects the surface from the ingress of dirt and grease.

Goldstar 12

TAL GOLDSTAR 12 is a grey quick-setting high-strength cement-based adhesive for fixing porcelain, granite, dark-coloured marble and natural stone, ceramic, clay and terrazzo tiles to walls and floors. The adhesive was designed for easy use, allowing a 4 hour pot life.

Limestone Collection

LIMESTONE: Calcareous rock in the widest sense. In Anglo-Saxon nomenclature this term is often used to distinguish a non-crystalline marble, (namely a calcareous stone = limestone) from a crystalline metamorphic stone = marble).

Mosaicfix

TAL MOSAICFIX is a quick-setting high-strength cement-based powder adhesive designed for fixing ceramic, porcelain and natural stone mosaics onto walls and floors. It can also be used as a grouting or pre-grouting of mosaics. The adhesive was designed for easy use, allowing up to 2 hours Pot Life after mixing.

Union Tiles | Florim Oversize magnUm® Stone

Union Tiles  Florim Oversize magnUm  Stone Fine porcelain stoneware for floors, walls and counter-tops.

Talfix

TALFIX is a grey quick-setting high-strength cement based adhesive ideally suited for, but not restricted to, smaller DIY installations and tile replacements. Suitable for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors.

Quartzite Collection

Quartzite collection from Union Tiles: A metamorphic stone, 80% of which is made up of quartz which is often easy to split into slabs or sheets.

CemWash | Rough Textured Cement Wall Finish

A two-coat decorative, coloured, weatherproof cement finish; supplied as CemWash first coat grey and CemWash top coat in the colour of your choice. Having a base of Portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. The purpose is to provide a tough, durable cement-based coating directly to brick, block or hard cured plaster walls.

Carrara Granostone

Carrara Granostone is a high build textured granite coating suitable for interior or exterior use on either new or previously painted walls that have been properly prepared.

PoolCrete | White & Coloured Marble Pool Plaster

POOLCRETE White & coloured marble pool plaster A 6mm thick smooth plaster recommended for the interior plastering of walls and floors of swimming pools, which becomes a very hard integral part of the pool structure. Not for use above the water level.

Slate Collection

SLATE: A fine: grained, foliated, metamorphic rock which splits along its parallel cleavage plains. The vast range of colours is derived from the minerals contained in the shale from which it was formed

Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

Onyx Collection

Onyx is a natural stone renowned for elegance and luxury design. The noble Onyx is a most ancient stone, known and utilised by early civilizations for its powerful energy and sombre beauty.

Sandstone Collection

Sandstone: Calcitic sedimentary stone, made up primarily from fragments of detritus and mineral granules, having dimensions between 1/6mm and 2mm. There are a great number of types of Sandstone depending on the genesis, structure and composition: eolianite, arkose (feldspathic -quartz sandstones) and lithic arenites (which may also be calcareous containing calcite or aragonite), etc.

TAL Invisiseal

TAL INVISISEAL is a specially formulated florosiloxane-based sealer which penetrates and bonds onto low-porosity natural stone tiles on walls and floors in interior and exterior installations, creating a hard-wearing and protective finish without causing discolouration. It dries clear and will repel water and most oils. It is suitable for use on low-porosity natural stone tiles, leaving no residue on the face of the tiles.

Tile-to-Tile

TAL Tile-To-Tile is a grey quick-setting high-strength cement-based adhesive specially formulated for fixing most types of tiles onto smooth and dense surfaces such as existing tiles, powerfloated screeds, etc.  TAL Tile-To-Tile is suitable for fixing tiles to walls and floors, in interior and exterior applications.  Priming of some substrates may not be required due to the superior adhesion properties of this product.  The adhesive was designed for easy use, allowing a 4 hour pot life.  TAL Tile-To-Tile should not be used with white or light-coloured porous natural stone tiles, where a grey adhesive may show through the tile in the form of ‘staining.

CreteStain | Floor Finish | Acid-based cement / concrete stain

An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

Goldstar 2

AL GOLDSTAR 2 is a grey ultra-fast setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. TAL GOLDSTAR 2 is ideal for remedial work and tiling in doorways and passages, where access is required soon after tiling.

TAL Mosaicfix Tile Adhesive for Bonding & Grouting of Mosaics

TAL Mosaicfix is a quick-setting high-strength cement-based powder adhesive designed for fixing ceramic, porcelain and natural stone mosaics onto walls and floors.  It can also be used as a grouting or pre-grouting of mosaics. The adhesive was designed for easy use, allowing up to 2 hours Pot Life after mixing.

DecoCrete | Shapeable Textured Plaster

A coloured, cement-based material formulated to be plastered to excessive thicknesses, but does not slide or shrink and dries rock hard. A textured shaping system for the creation of artistic finishes, such as rock features, imitation brick walls and pool copings.

Travertine Collection | Natural Stone | Union Tiles

Travertine Collection: Carbonatic sedimentary rock of chemical origin, with a characteristic cemented of vacuolar structure. Travertine originates due to precipitation of calcium carbonate from saturated water which leaves voids in the stone which is a characteristic of all travertine. These voids are usually filled.

Carrara Granostone

Carrara Granostone is a high build textured granite coating suitable for interior or exterior use on either new or previously painted walls that have been properly prepared.

Marblefix

TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1 1/2 hour pot life.

Granite Collection 8th Edition

One of the most versatile and hard-wearing stone cladding materials available, Rudi’s Choice granite is ideal for cladding walls, columns and floors and perfectly suited for use as countertops. Rudi’s Choice granite offers you a selection of local and imported granite materials with a wide variety of colours and natural patterns, sure to suit any design project. For exceptional interior decor, Rudi’s Choice offers a select collection of rare onyx materials that will take your breath away.

Granite Collection

Granite Collection: Magmatic intrusive rock, with potassic an acid chemism, made up of quartz potassic feldspar, mica and accessory minerals, plagioclase. Any compact rock which is strong and can be polished.

TAL Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

Marbleflex

TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

CreteStain | Wall Finish | Acid-based cement / concrete stain

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.


Copyright © 2019 New Media, a division of Media24. All rights reserved.