Search results for

mortar

Brochures & Datasheets

X-Tech StoneFlow Industrial grade rapid set self smoothing decorative screed

X-Tech StoneFlow is a cement based self smoothing heavy duty decorative industrial screeding system. It is shrinkage compensated and rapid setting. It is especially designed for use in industrial environments, on both new construction and renovation projects. It is designed for applications exposed to heavy traffic and abrasion, such as factories, warehouses and production areas. It is also suitable for commercial and residential applications.

X-Tech EpoxyFloor TF Abrasion and chemical resistant epoxy floor screed

X-Tech EpoxyFloor TF is a three component, trowel applied epoxy floor screed that produces an extremely dense, durable, abrasion and chemically resistant floor. A fast cure grade is available that can accept pedestrian traffic after 3h at 25C and vehicular traffic after 4h at 25C.

Fine Epoxy Mortar & Grout

TAL Fine Epoxy Mortar & Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin non-sagging adhesive ideal for bonding tiles to walls and floors, and can also be used for subsequent grouting.  It has excellent non-sag, stain and chemical resistant properties and is easy to apply and clean up after application.  TAL Fine Epoxy Mortar & Grout is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. It is also suitable for use with glass tiles/mosaics and resin-bonded tiles.  TAL Fine Epoxy Mortar & Grout is available in Light Grey and White

X-Roc SkimCoat

X-Roc SkimCoat is a single component cementitious polymer modified concrete skim coat for use in horizontal, vertical and overhead applications.

Concrete Repair & Protection | Epidermix 389

Two component, solvent free, low viscosity modified epoxy. A crack injection compound for cracks between 0.10 and 0.05 mm in width. May also be used as primer for epoxy mortars and electrical encapsulation.

Expoxy Adhesive & Grout

TAL Epoxy Adhesive & Grout is a high performance, 3-component epoxy-resin adhesive for fixing tiles to walls and floors, and can also be used for subsequent grouting. TAL Epoxy Adhesive & Grout is suitable for use with glass tiles/mosaics and resin bonded tiles, and is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas, etc.  Tal Epoxy Adhesive & Grout is available in Light Grey and White

Politerm Blu: Lightweight Thermal Insulating Mortar

EPS beads which are treated with a chemical additive to enable the production of lightweight, thermal insulation mortars of various densities. Applications include thermal insulation mortar for concrete roof decks, underground floor slabs, basement walls, swimming pools etc, lightweight filler for voids or levelling of floor slabs, cavity fill for steel frame construction…

epidermix 318 | TWO COMPONENT EPOXY ADHESIVE/REPAIR COMPOUND

Two-component, solvent-free, filled, polyamide cured epoxy.

Cemcrete Products Brochure | Manufacturers of Distinctive Decorative Coatings

Cemcrete Products Brochure Since 1973 Cemcrete has manufactured a specialised range of cement-based coatings and building materials to finish and aid in construction projects. Cemcrete’s range of over 80 products includes cement-based finishes for walls, floors, countertops, pools and many more. These distinctive finishes are favourable among homeowners, architects and the construction industry in general due to their superior quality, excellent value, as well as offering a unique alternative to generic coatings.

X-Tech DecoQuartz TF Abrasion and chemical resistant decorative epoxy floor screed

X-Tech DecoQuartz TF is a three component, trowel applied 3 to 6mm thick epoxy floor screed that produces a non slip, abrasion and chemically resistant floor that is decorative in appearance. It is supplied with a clear epoxy resin and a wide range of colored quartz aggregates. By combining the various colors many individual color combinations can be produced.  A high temperature resin is available in area subject to temperature up to 110C.

X-Roc MicroCrete Shrinkage Compensated Fluid Micro Concrete

X-Roc MicroCrete is a single component, shrinkage compensated, fluid micro concrete manufactured from selected cements, aggregates and additives. It can be used at a wide range of work abilities. When used as a fluid micro concrete it is self-compacting. It has exceptional resistance to carbonation, chloride ingress, sulfate attack and freeze thaw attack.

X-Tech DecoQuartz QB applied to concrete

Method Statement on how to apply TAL- X-Tech DeocoQuartz QB to concrete

Primer Aggregate Graded Silica Sand for Mechanical Keying and Slip Resistance

TAL Primer Aggregate is high-quality well-graded silica sand.  It provides a mechanical key for resin flooring systems as well as cementitious screeds/toppings/underlayments. TAL Primer Aggregate is also used in conjunction with TAL resin flooring and coating systems to provide a slip resistant finish. Available in Fine (SQ1), Medium (SQ2) and Coarse (SQ3).

SikaTop Seal-107 ZA

SikaTop® Seal-107 is a two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. SikaTop® Seal-107 complies with the requirements of EN 1504-2 as protective coating.

Lightweight Steel | Trusses, Walls, Panels and Floors

Clotan Steel Lightweight Steel for trusses, walls, panels and floors. Trusses and framing are considered to be critical to ensuring the security, value and service life of a building. Light gauge steel is fast becoming the preferred alternative to the traditional building materials such as bricks, mortar and timber in the construction industry, not only because of its superior properties but also because it is more affordable.

Fusion Concrete look and feel, hybrid technology flooring

Fusion is a four component, self smoothing hybrid technology floor topping that produces a concrete look finish.

X-Tech DecoQuartz TF, applied to concrete

TAL X-Tech DecoQuartz TF  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

CreteStain Datasheet | Acid-Based Mixture

An acid-based mixture containing special chemicals which reacts with the cement/concrete to colour the surface.

Rapidfix

TAL RAPIDFIX is a single-component high-performance Patching and Repair compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates specially designed for repairing of deteriorated concrete and mortar surfaces as well as patching holes in floor and wall surfaces.

CemCote (Skimmed) Datasheet | Cemcrete

CemCote Skimmed datasheet is a pigmented, thin film cement- based decorative wall covering which is versatile and durable. It is a two coat system which produces a 1.5mm smooth decorative finish suitable for application onto new plastered walls that have been sponge, wood or steel floated, or previously painted walls. It is ideal for internal and external domestic or commercial applications. CemCote can also be brush applied if a different finish is required. See CemCote (Brushed) datasheet.

X-Tech IntegraFloor Emery Emery based monolithic floor hardening compounding

TAL X-Tech IntegraFloor Emery is a premixed non rusting floor hardener used to form a monolithically hardened concrete floor. It produces an abrasion resistant and hard wearing surface and is applied by the shake on technique.

CemPlaster Datasheet | Cemcrete

A premium blend of OPC, quality graded aggregates, high-performance additives and fibres designed as a decorative coloured, and weatherproof skim plaster to be applied between 3mm and 5mm thick. CemPlaster is suitable as an interior or exterior application.

X-Tech UraFloor HT Heavy duty polyurethane screed and self leveling flooring

X-Tech UraFloor HT is a heavy duty solvent free polyurethane flooring system which is available as both in screed and self leveling forms.

Company Profile

a.b.e.® Construction Chemicals was founded in 1932 but started operations in 1939 in Durban as a supplier of bitumen to municipalities in KwaZulu-Natal. a.b.e.® has over the years grown in both size and diversity to become a major supplier of specialised construction products to the building, civil engineering and building maintenance industries, supplying products directly to customers through its branch network as well as through builders’ merchants and hardware stores.

X-Tech UraFloor TF Heavy duty polyurethane screed and mortar

TAL – X-Tech UraFloor TF is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock.

Fine Epoxy Mortar & Grout

TAL Fine Epoxy Mortar & Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin non-sagging adhesive ideal for bonding tiles to walls and floors, and can also be used for subsequent grouting. It has excellent non-sag, stain and chemical resistant properties and is easy to apply and clean up after application. TAL Fine Epoxy Mortar & Grout is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. It is also suitable for use with glass tiles/mosaics and resin-bonded tiles. TAL Fine Epoxy Mortar & Grout is available in White and Light Grey.

X-Tech EpoxyFloor SL1 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL1 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1 to 1.5mm thick.

Decorative and Functional Cement and Resin Flooring Range

  TAL’s decorative cement and resin flooring range  for residential and industrial floors.

Rapidfix

TAL Rapidfix is a single-component high-performance Patching and Repair compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates specially designed for repairing of deteriorated concrete and mortar surfaces as well as patching holes in floor and wall surfaces.  It is a multi-purpose system designed to withstand heavy loading and trafficking in both industrial and domestic installations.  TAL Rapidfix can be applied to fill holes prior to installing floor coverings, underlayments or screeds, or can be left exposed in both high traffic industrial applications, ie: factories, and in domestic applications

X-Tech IntegraFloor Quartz Monolithic floor hardening compound

TAL X-Tech IntegraFloor Quartz is a premixed non rusting floor hardener used to form a onolithically hardened concrete floor. It produces an abrasion resistant and hard wearing surface and is applied by the “shake on” technique.

Sika MonoTop - 615 HB

Sika® MonoTop -615HB is a high build cementitious, polymer modified, one component repair and reprofiling mortar containing silica fume.

Fusion, General Use

TAL – Fusion, general use  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

RenoCrete | Spray-on textured floor overlay | Cemcrete

RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

Mortar Mix - Coloured Datasheet | Cemcrete

A coloured masonry Mortar Mix comprising white cement, graded sand and certain additives to give high bond strength, waterproof joints and high water retention for workability and plasticity. Good water retention gives improved bond and bleeding characteristics. Also has excellent water absorption qualities.

DecoCrete Shapeable textured plaster

Shapeable textured plaster

Concrete Countertop Pre-Casting Mix

Countertop Mix is a 3 component pre-casting mix that contains a proprietary blend of cements, and other admixtures to produce a high strength countertop.

Water-Based Epoxy Grout

TAL Water-Based Epoxy Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin Grout with excellent chemical, acid and stain resistant properties, formulated specifically for ease of application and clean-up. TAL Water-Based Epoxy Grout is ideal for installation areas where imperviousness, chemical and acid resistance and/or good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. TAL Water-Based Epoxy Grout is available in Light Grey and White

Innofilla

Innofilla, Plaster, Used in Conjunction with Mortar Mix to add Thermal Properties to Concrete Bricks & Blocks. Thermal Insulation.

Sikafloor Garage: 2-part water based epoxy coating

Sikafloor® Garage is a two part, water dispersed, coloured, epoxy resin based coating. that can be used for concrete, cement screeds, broadcast systems and epoxy mortars. It can be subjected to normal up to medium heavy mechanical and chemical loading and is used for production areas, warehouses, car park decks, garages, etc.

Industrial Epoxy Grout (Fine & Coarse)

TAL Industrial Epoxy Grout is ideal for internal and external applications where chemical resistance and hygienic conditions are extremely important, such as abattoirs, breweries, dairies, food and beverage production and preparation areas, hospitals, mine change rooms, swimming pools, bacteria and mould growth areas, etc. TAL Industrial Epoxy Grout is suitable for use in installations where tiling will be subjected to steam cleaning. TAL Industrial Epoxy Grout is simple to apply, with minimal wastage and excellent clean off properties.

X-Tech StoneFlow, General Use

Method Statement on TAL-X-Tech StoneFlow, General Use.

abe.®flo | EPOXY SELF-LEVELLING FLOORING SYSTEM

EPOXY SELF-LEVELLING FLOORING SYSTEM abe.®flo is a four-component solvent-free self-levelling flooring surface system. The system comprises a clear resin and hardener system, prepacked blended aggregate and a ready-for-use pigment paste.

X-Tite ResiLoc EX22 High Performance Epoxy Resin Anchor

X-Tite ResiLoc EX22 is a pure epoxy resin grout use for general purpose horizontal and vertical anchoring in rock, concrete, brick or solid masonry.

abe dura® proof cem block

dura.®proof cem block is a powdered waterproofing admixture that when added to Portland cement plaster or mortar mixes obstructs the capillaries and restricts moisture movement.

General Construction & Concrete Repair

The General Construction and Concrete Repair manual includes adhesives, coatings / sealers, spalling repair systems, primers, waterstops, protective coatings, fairing, reprofiling, crack injection systems, cementitious grouts / mortars, epoxy mortars / grouts…

Anchor Grout Datasheet | Cemcrete

Anchor Grout is a rapid set ready-for-use (merely add water) Portland cement-based grouting compound. It contains chemical reagents which prevent shrinkage during curing.

EIFS Basecoat | Coating to Level or Repair Vertical Surfaces

EIFS BaseCoat is a special mixture of various admixtures and Ordinary Portland Cement for repair of concrete and masonry, adhering and surfacing of EIFS Insulation boards prior to applying Cemcrete’s decorative coatings.

X-Tech SuperFlow

X-Tech SuperFlow is a cement based self smoothing decorative screeding system which is supplied in a wide range of colours. It is shrinkage compensated and rapid setting. The system is designed to produce a hard wearing decorative floor surface suitable for residential and light commercial applications. It is suitable for interior applications only.

X-Tech UraFloor TF applied to concrete

Method Statement on how to apply TAL- X-Tech UraFloor TF to concrete.

TexCrete Fibre-cement casting mix

Fibre-cement casting mix

X-Roc UltraPatch Low Shrinkage High Build Concrete Repair Mortar

X-Roc UltraPatch is a cementitious single component polymer modified concrete repair mortar for use in vertical and overhead applications

abe.®cote 337 | Tough epoxy paint

abe.®cote 337 is a two component, solvent free, water-dispersed, polyamide cured epoxy.

Colour Hardener Sealer | Cemcrete

A non-yellowing clear, thermoplastic acrylic lacquer-based resin which displays excellent UV stability. Has very fast solvent release, i.e. drying properties. The sealer greatly enhances the colour and protects the surface from the ingress of dirt and grease.

Concrete Repair & Protection | Dura®rep FR

Polymer-modified, fibre-reinforced, cement-based mortar, which is chloride-free, ready to use, non-shrink and of a single component.

Floorkey General Purpose Method Statement, Applied as a Mortar Additive

Floorkey general purpose method statement applied as a Mortar additive  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech UraFloor CS Heavy duty polyurethane screed and mortar for cold stores

TAL – X-Tech UraFloor CS is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock and that been specifically developed for use in cold stores and freezer rooms.

X-Shield BugFill, General Use

TAL method statement on X-Shield BugFill, General Use and application

abe® CEM-Blanc White Portland Cement

abe® CEM-blanc is a general purpose white Portland cement, specially manufactured to provide superior early strength with the added advantage of providing a wide range of aesthetic and decorative opportunities due to its key features of whiteness, high strength and durability. In addition to affording great design and colour versatility, abe® CEM-blanc complies fully with the requirements specified in SANS 50197-1 for type CEM II 42.SN cement.

X-Tech DecoQuartz QB Durable and decorative epoxy floor system

X-Tech DecoQuartz QB is a combination of colored quartz aggregate and 100% solids liquid epoxy resin that when applied, forms a seamless, colorful, chemical resistant and long wearing floor.

dura® proof cem block

dura.®proof cem block is a powdered waterproofing admixture that when added to Portland cement plaster or mortar mixes obstructs the capillaries and restricts moisture movement.

CemWash Rough textured cement wall finish

Cemwash is a Rough textured cement wall finish

Primer Aggregate General Purpose

Primer Aggregate  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

CemCote Skimmed | Trowel-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

Decorative Concrete Solutions

Decorative Concrete Solutions This brochure presents a range of solutions developed by CHRYSO in order to showcase for the decorative potential of concrete. Fashionable and versatile, concrete creates unique natural atmospheres. Used primarily for mechanical properties, it is also a material of choice for its aesthetic qualities. A comprehensive range of solutions for new projects or renovations, for residential, tertiary, or urban developments.

X-Roc StrongPatch High Strength Shrinkage Compensated Polymer Modified Repair Mortar

X-Roc StrongPatch is a single component, fiber reinforced, shrinkage compensated, high strength concrete repair mortar manufactured from selected cements, aggregates and additives. It has exceptional resistance to carbonation, chloride ingress, sulphate attack and freeze thaw attack.

X-Roc StrongPatch, Used as a screed

The laying of screed is a skilled trade and should only be carried out by experienced workers.  Application by unskilled labor may result in for additional information before commencing work

CHRYSO®Quad 20 | Viscosity modifying admixture | Concrete Mixes

CHRYSO®Quad 20 unique formulation increases the viscosity of cement paste with limited impact on concrete slump / slump flow.

Dia Star Mining & Quarrying Equipment

Equipment, accessories and expansive mortar for mining, drilling, quarrying and stone cutting.

SculptCrete Fibre-cement mixture for art pieces

Fibre-cement mixture for art pieces

X-Tite EpoxyGrout 150 Flowable Epoxy ResinGrout

X-Tite EpoxyGrout 150 is a flowable epoxy resin grout used for a variety of grouting and anchoring applications where high dynamic loads are anticipated and high early strength is required

Cemcrete | Wall Products

Cemcrete Wall Products Wall Preparation Products, Trowel-on & Brush-on Wall Finishes & Sealers

Art Connection A variety of products for cement art creations

A variety of products for cement art creations

CreteStain | Floor Finish | Acid-based cement / concrete stain

An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

X-Shield BugFill

X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.

Colour Hardener Datasheet | Cemcrete

A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, lightfast pigments and certain additives which set rock-hard and which has exceptional abrasion resistance. Some cement floor finishing experience is required for the success of this application.

RenoCrete Datasheet | Cemcrete

Concrete Resurfacing Solution Cemcrete’s RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

Sikafloor® -PurCem®

Flooring solutions for the food industry and other extreme service conditions. Sikafloor -PurCem® is suitable for use in areas subject to extreme hygienic conditions which require frequent and intensive steam or hot water and chemically aggressive cleaning.

Product Segments

a.b.e. Construction Chemicals product segments include concrete repair and protection, general construction, flooring, silicones, sealants and adhesives, waterproofing and high performance coating solutions…

CemPlaster Coloured fibre-reinforced plaster

Coloured fibre-reinforced plaster

abe® Project | Shoprite DC Floor

Flooring for distribution centre. abe® flooring resin epoxy system is a solvent free, clear, two component, low viscosity epoxy resin system which is cycloaliphatic amine cured (clear light colour). Further advantages include a proven system with a universal formulation, reduced moisture and carbon dioxide sensitivity, cures well down to +10°C, easily applied, good chemical resistance with less sensitivity  against humidity and low viscosity.

CreteStain | Wall Finish | Acid-based cement / concrete stain

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.


Copyright © 2019 New Media, a division of Media24. All rights reserved.