• Recommendations:

Search results for

epoxy coatings

Brochures & Datasheets

Primer Aggregate Graded Silica Sand for Mechanical Keying and Slip Resistance

TAL Primer Aggregate is high-quality well-graded silica sand.  It provides a mechanical key for resin flooring systems as well as cementitious screeds/toppings/underlayments. TAL Primer Aggregate is also used in conjunction with TAL resin flooring and coating systems to provide a slip resistant finish. Available in Fine (SQ1), Medium (SQ2) and Coarse (SQ3).

X-Tech DeckCoat CP Polyurethane anti-skid car park coating system

X-Tech DeckCoat CP is multi layer high performance, flexible polyurethane anti-skid car park coating system comprising a primer, anti-skid coat and aliphatic polyurethane top coat.

Interior Paint & Decor Plasters

Africote’s products and services include: acrylic paints, cement paints, wall plasters and renderings, flooring products, decorative paints, solvent based paints, surface preparation products, primers, sealers, waterproofing products, low cost housing products…

Sikafloor Garage: 2-part water based epoxy coating

Sikafloor® Garage is a two part, water dispersed, coloured, epoxy resin based coating. that can be used for concrete, cement screeds, broadcast systems and epoxy mortars. It can be subjected to normal up to medium heavy mechanical and chemical loading and is used for production areas, warehouses, car park decks, garages, etc.

X-Tech UraFloor CS applied to concrete for use in freezer room

TAL – X-Tech UraFloor CS applied to concrete installation Guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information given is a summary intended for guidance only.

abe.®cote 337 | Tough epoxy paint

abe.®cote 337 is a two component, solvent free, water-dispersed, polyamide cured epoxy.

abe® Project | Audi Claremont Western Cape

abe.®cron dry-shake surface hardener provided a low cost solution for hardening this automotive maintenance area and to create a more attractive, uniform appearance of the floor.  abe.®flo epoxy self-levelling flooring system at 2mm was perfect to cater for Audi’s high hygiene standards with good colour retention and a medium gloss finish.

abe.®flo | EPOXY SELF-LEVELLING FLOORING SYSTEM

EPOXY SELF-LEVELLING FLOORING SYSTEM abe.®flo is a four-component solvent-free self-levelling flooring surface system. The system comprises a clear resin and hardener system, prepacked blended aggregate and a ready-for-use pigment paste.

X-Tech EpoxyAqua 100 High performance wall and floor coating for concrete

X-Tech EpoxyAqua 100 is a high performance, breathable epoxy wall and floor coating that is also decorative and suitable for use in a wide range of applications.

General Construction & Concrete Repair

The General Construction and Concrete Repair manual includes adhesives, coatings / sealers, spalling repair systems, primers, waterstops, protective coatings, fairing, reprofiling, crack injection systems, cementitious grouts / mortars, epoxy mortars / grouts…

X-Tech EpoxyFloor SL2 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL2 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1.5 to 3mm thick.

X-Tech EpoxyFloor TF applied to concrete

Method Statement on how to apply TAL- X-Tech EpoxyFloor TF  to concrete.

X-Shield SF Primer High performance primer for epoxy coating and floor systems

X-Shield SF Primer is a high penetration primer suitable for use with a wide range of epoxy coatings and floor systems.

X-Tech IntegraFloor Quartz, General Use

TAL -X-Tech IntegraFloor Quartz, application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech EpoxyFloor TF Abrasion and chemical resistant epoxy floor screed

X-Tech EpoxyFloor TF is a three component, trowel applied epoxy floor screed that produces an extremely dense, durable, abrasion and chemically resistant floor. A fast cure grade is available that can accept pedestrian traffic after 3h at 25C and vehicular traffic after 4h at 25C.

X-Calibur® High Performance Epoxy Floor Systems

TAL’s X-Tech Epoxy floor systems including: X-Tech EpoxyAqua 100 – High performance wall and floor coating for concrete, X-Tech EpoxyFloor SL – Abrasion and chemical resistant self-leveling epoxy floor, X-Tech EpoxySeal FLR100 – High performance sloven free floor coating for concrete, X-Tech Epoxy TF Abrasion and chemical resistant self leveling epoxy floor screed.

X-Tech DeckCoat CP - General Use

TAL X-Tech DeckCoat CP installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

epidermix 318 | TWO COMPONENT EPOXY ADHESIVE/REPAIR COMPOUND

Two-component, solvent-free, filled, polyamide cured epoxy.

X-Tech AntiStatic SLE applied to new concrete using X-Shield SF Primer or MT Primer

Method Statement on how to apply TAL X-Tech AntiStatic SLE to new concrete using X-Shield SF Primer or MT Primer.

X-Tech DecoQuartz QB applied to concrete

TAL – X-Tech DecoQuartz QB application to concrete installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Shield BugFill, General Use

TAL method statement on X-Shield BugFill, General Use and application

Car Park Solutions

X-Tech Car Park Solutions from TAL.

X-Tech EpoxyFloor SL1 applied on to X-Prime MT100

TAL -X-Tech EpoxyFloor SL1 applied on to X-Prime MT100 application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Flooring Product Brochure

a.b.e.® Construction Chemicals‘ range of specialised floor coatings are screeds based on bitumen, dry shake cementitious materials, self levelling cementitious screeds, epoxies and polyurethanes. Typical applications are the protection of concrete floors and screeds against wear from traffic abrasion, as well as a range of chemical and thermal shock requirements. Certain products can also be used to provide decorative floor finishes to car showrooms, hardware stores, supermarkets and other retail outlets.

abe® VIP Germany Project | Park Deck Coating for Consolvo Oslo

The Management Company of a Moose Park outside Oslo, wanted to protect their existing Parking garage with 3 decks to ensure a water tight system that would prevent leakages on the lower decks, and also offer a high degree of surface protection against wear and tear, paired with ease of cleaning.  Quickspray Industrial slow, a slow set floor coating, designed for flooring operations that need a flat result without dry overspray was used.

X-Calibur® X-Tech DecoQuartz Range

TAL’s DecoQuartz Flooring Systems include: X-Tech DecoQuartz QB – Decorative colour quartz broadcast epoxy floor system, X-Tech DecoQuartz HT- Abrasion of heat resistant decorative epoxy floor screed, X-Tech DecoQuartz TF – Abrasion and chemical resistant decorative epoxy floor screed, X-Tech DecoQuartz EF – Decorative polyurethane floor and wall coat.

X-Calibur® High Performance Urethane Floor Systems

TAL’s Urethane Flooring Systems include: X-Tech Urafloor TF – General purpose heavy duty polyurethane screed, X-Tech Urafloor CS – Heavy duty polyurethane screed for cold stores, X-Tech Urafloor SL – General purpose self leveling polyurethane screed, X-Tech Urafloor H- Heavy duty polyurethane screed for high temperature applications.

X-Shield VaporStop HB Method Statement

TAL- X-Shield VaporStop HB  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Shield BugFill

X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.

X-Tech CrystalClear Solvent free clear coating, sealer and binder

TAL X-Tech CrystalClear is a clear high performance, solvent free, epoxy coating/sealer and is also suitable for use as a binder and sealer for decorative floor systems.

X-Calibur® X-Tech SuperFlow

TAL’s  X-Tech SuperFlow is suitably designed for application onto concrete substrates. Allow all new concrete work and screeds to cure for at least 6 weeks and 4 weeks respectively before proceeding. The substrate must be structurally sound, clean and dry and free from all traces of surface laitance and contamination such as dust, dirt, waxes, oils, bitumen, old adhesives, paint, grease, weak cement screeds, shutter release and curing agents, sealing compounds, etc. All damaged, defective, deteriorated, friable (powdery) and hollow sounding areas must be removed until a solid background is achieved. These areas must be made good before proceeding.  The surface must be prepared, by captive blasting or grinding, to ensure that the aggregate in the concrete is fully exposed and open, ie to achieve a Concrete Surface Profile (CSP) of 5 or 6 (Medium Scarification).

X-Tech EpoxySeal FLR100, General use

TAL – X-Tech EpoxySeal FLR100, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Prime MT100 High Performance moisture tolerant primer and sealer for coating and floor systems

X-Prime MT100 is a high penetration primer suitable for use with a wide range of epoxy coatings and floor systems on substrates that have a high moisture content.  It can also be used as a stand alone sealer for green concrete.

Sikafloor® and Sikagard® Selection Guide

Sikafloor®-CR and Sikagard®-CR ranges are the state of the art in products specifically developed for floor, wall and ceiling coatings in cleanroom environments. Sikafloor and Sikagard are suitable for all clean manufacturing facilities with a controlled level of contamination, such as minimum particle and VOC/AMC emissions.

X-Tech UraFloor TF Heavy duty polyurethane screed and mortar

TAL – X-Tech UraFloor TF is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock.

X-Tech AntiStatic SLE Conductive epoxy flooring system

TAL – X-Tech AntiStatic SLE is a three layer system comprising an epoxy primer, a water dispersed epoxy base coat and a self smoothing epoxy top coat that produces a conductive or dissipative floor. The conductive grade (CG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. The dissipative grade (DG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

Decorative and Functional Cement and Resin Flooring Range

  TAL’s decorative cement and resin flooring range  for residential and industrial floors.

abe.® screed dura.® Top

abe.®screed dura.®Top is a single component, quick hardening, self-smoothing, shrinkage compensated cement based overlay for levelling floors.

X-Tech EpoxySeal FLR100 Chemical resistant high build epoxy floor coating

TAL – X-Tech EpoxySeal FLR100 is a high performance, high build, solvent free epoxy floor coating that is also decorative and suitable for use in a wide range of applications. It can also be used as a wall coating.

X-Tech AntiStatic SLB

X-Tech AntiStatic SLB is a three layer breathable system comprising a water dispersed primer, a water dispersed epoxy base coat and a water based self smoothing epoxy top coat that produces a conductive or dissipative floor. When used with X-Tech Conductive Base Coat the floor will have a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. When used with X-Tech Dissipative Base Coat the floor will have a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

X-Shield VaporStop HB

TAL – X-Shield VaporStop HB is a moisture tolerant, two component solvent free epoxy primer. On curing it produce a high cross link density barrier coat that prevents the debonding of coatings and floor toppings due to high moisture vapor emission rates (MVER).

X-Tech UralFloor Ht, Screed Grade Applied to concrete

TAL X-Tech UralFloor Ht, Screed Grade application  to concrete  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech UraFloor CS Heavy duty polyurethane screed and mortar for cold stores

TAL – X-Tech UraFloor CS is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock and that been specifically developed for use in cold stores and freezer rooms.

Product Segments

a.b.e. Construction Chemicals product segments include concrete repair and protection, general construction, flooring, silicones, sealants and adhesives, waterproofing and high performance coating solutions…

X-Shield SF Primer, General Use

X-Shield SF Primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

TexCrete Fibre-cement casting mix

Fibre-cement casting mix

Isowall | Face Material Colour Range

Isowall – ArcelorMittal South Africa Limited standard Colour Chart

X-Tech DecoQuartz QB Durable and decorative epoxy floor system

X-Tech DecoQuartz QB is a combination of colored quartz aggregate and 100% solids liquid epoxy resin that when applied, forms a seamless, colorful, chemical resistant and long wearing floor.

X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls

TAL – X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls application  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information  is a summary intended for guidance only.

X-Tech EpoxyFloor SL1 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL1 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1 to 1.5mm thick.

X-Tech EpoxyFloor SL3 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL3 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 3 to 4mm thick.

abe® Project | Futurelife Production Plant

abe.®cote 400 Hi-build is an economical four-component, solvent-free epoxy flooring system comprising a clear resin and hardener, pre-packed filler and a ready for- use pigment paste. Ideal for food processing plants and can be used as binder for abrasive grit to yield nonslip floor finishes. abe.®cote 400 Hi-build has good protective qualities and resistance to chemicals. Reduces maintenance, seamless and hygienic and is available in a range of colours.

X-Tech Urafloor HT, Self Leveling Grade, Applied to concrete

TAL – X-Tech UraFloor HT, Self Leveling Grade application to concrete installation Guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.


Copyright © 2019 New Media, a division of Media24. All rights reserved.