• Recommendations:

Search results for

epoxy adhesives

Brochures & Datasheets

Car Park Solutions

X-Tech Car Park Solutions from TAL.

abe® Project | ACSA PE Airport- Concrete Repair

Dow Corning®890 SL is a self-levelling silicone sealant  for concrete and concrete to asphalt pavement joints. Flows into irregular joint widths and does not require tooling. Weather and UV resistant. epidermix 345 is a wet-to-dry epoxy adhesive with extended open time and is useful for structural bonding of fresh wet concrete to existing concrete. Ideal for bridges, pavements, loading bays and factories. dura.rep® FMC – shrinkage compensated fluid micro-concrete, is a cement based non-shrink concrete reinstatement grout which can be applied by pouring or pumping.

Refurbishment: Structural Strengthening with Sika Systems

The use of a building or civil engineering structure may change throughout the course of its service life, as for example its whole function can change, loads can increase and/or higher building standards are required and the structure must be made compliant. Sika provides fully comprehensive solutions with complete systems for all kinds of structural strengthening and improvement. Whether increasing the bending, shear or impact resistance, tested and proven Sika systems are available for use on reinforced concrete, steel, wood and masonry load-bearing structures.

Silicones, Sealants & Adhesives

a.b.e.® Construction Chemicals‘ range of applied sealants is based on modified bitumens, tars, acrylics, silicones, modified epoxies, polysulphides and polyurethanes, with a.b.e.® currently the leading distributor of PVC, rubber and hydrophilic waterstops. Examples of typical applications are sealing of joints in road surfaces, runways and airport hangars, sealing of construction joints in walls and floors in commercial and industrial buildings. In addition products are used for houses, water reservoirs and sewage processing structures, sealing around general household sanitary ware and certain automotive applications.

abe.®cote 337 | Tough epoxy paint

abe.®cote 337 is a two component, solvent free, water-dispersed, polyamide cured epoxy.

X-Calibur® High Performance Epoxy Floor Systems

TAL’s X-Tech Epoxy floor systems including: X-Tech EpoxyAqua 100 – High performance wall and floor coating for concrete, X-Tech EpoxyFloor SL – Abrasion and chemical resistant self-leveling epoxy floor, X-Tech EpoxySeal FLR100 – High performance sloven free floor coating for concrete, X-Tech Epoxy TF Abrasion and chemical resistant self leveling epoxy floor screed.

X-Tech StoneFlow, General Use

Method Statement on TAL-X-Tech StoneFlow, General Use.

X-Calibur® High Performance Shake On Floor Systems

TAL’s high performance shake on systems including: X-Tech IntegraFloor Emery, X-Tech IntegraFloor Quartz and X-Tech Integrafloor S.

General Construction & Concrete Repair

The General Construction and Concrete Repair manual includes adhesives, coatings / sealers, spalling repair systems, primers, waterstops, protective coatings, fairing, reprofiling, crack injection systems, cementitious grouts / mortars, epoxy mortars / grouts…

Concrete Repair & Protection | Epidermix 344

Epidermix 344 is a two-component, solvent-free, polysulphide modified epoxy adhesive. Bonding fresh (plastic) concrete to existing concrete, plaster to brickwork. Can be used to provide a damp-proof barrier within the concrete matrix. If applied onto reinforcing steel epidermix 344 will cause no loss of concrete/steel bond strength.

X-Tech EpoxyFloor SL3 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL3 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 3 to 4mm thick.

X-Tech EpoxyFloor TF applied to concrete

Method Statement on how to apply TAL- X-Tech EpoxyFloor TF  to concrete.

epidermix 318 | TWO COMPONENT EPOXY ADHESIVE/REPAIR COMPOUND

Two-component, solvent-free, filled, polyamide cured epoxy.

Fine Epoxy Mortar & Grout

TAL Fine Epoxy Mortar & Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin non-sagging adhesive ideal for bonding tiles to walls and floors, and can also be used for subsequent grouting.  It has excellent non-sag, stain and chemical resistant properties and is easy to apply and clean up after application.  TAL Fine Epoxy Mortar & Grout is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. It is also suitable for use with glass tiles/mosaics and resin-bonded tiles.  TAL Fine Epoxy Mortar & Grout is available in Light Grey and White

abe.®flo | EPOXY SELF-LEVELLING FLOORING SYSTEM

EPOXY SELF-LEVELLING FLOORING SYSTEM abe.®flo is a four-component solvent-free self-levelling flooring surface system. The system comprises a clear resin and hardener system, prepacked blended aggregate and a ready-for-use pigment paste.

X-Tech EpoxySeal FLR100, General use

TAL – X-Tech EpoxySeal FLR100, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech EpoxyFloor SL2 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL2 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1.5 to 3mm thick.

Sika® ComfortFloor - Selection Guide

Sika flooring solutions for commercial and public building areas. The range is suitable for all commercial and public buildings, such as schools, museums, retails, leisure etc., and where personnel stand for long periods of time or where a reduction of footfall noise and horizontal noise transmission is required.

X-Calibur® X-Tech SuperFlow

TAL’s  X-Tech SuperFlow is suitably designed for application onto concrete substrates. Allow all new concrete work and screeds to cure for at least 6 weeks and 4 weeks respectively before proceeding. The substrate must be structurally sound, clean and dry and free from all traces of surface laitance and contamination such as dust, dirt, waxes, oils, bitumen, old adhesives, paint, grease, weak cement screeds, shutter release and curing agents, sealing compounds, etc. All damaged, defective, deteriorated, friable (powdery) and hollow sounding areas must be removed until a solid background is achieved. These areas must be made good before proceeding.  The surface must be prepared, by captive blasting or grinding, to ensure that the aggregate in the concrete is fully exposed and open, ie to achieve a Concrete Surface Profile (CSP) of 5 or 6 (Medium Scarification).

Concrete Repair & Protection | Epidermix 389

Two component, solvent free, low viscosity modified epoxy. A crack injection compound for cracks between 0.10 and 0.05 mm in width. May also be used as primer for epoxy mortars and electrical encapsulation.

Dia Star Floor and Slab Processing Machinery / Abrasives and Floor Care Products

Dia Star’s floor and slab processing machinery includes floor grinders, polishing machines, scrubbing & buffing machines and edge profiling machines. Dia Star also supplies floor care products for natural materials, polished concrete and terrazzo.

Fine Epoxy Mortar & Grout

TAL Fine Epoxy Mortar & Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin non-sagging adhesive ideal for bonding tiles to walls and floors, and can also be used for subsequent grouting. It has excellent non-sag, stain and chemical resistant properties and is easy to apply and clean up after application. TAL Fine Epoxy Mortar & Grout is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. It is also suitable for use with glass tiles/mosaics and resin-bonded tiles. TAL Fine Epoxy Mortar & Grout is available in White and Light Grey.

X-Shield VaporStop HB

TAL – X-Shield VaporStop HB is a moisture tolerant, two component solvent free epoxy primer. On curing it produce a high cross link density barrier coat that prevents the debonding of coatings and floor toppings due to high moisture vapor emission rates (MVER).

abe® Project | Mondi Chipper Plant - Concrete Repair

Upgrade and concrete repair work of Mondi Chipper Plant. dura.®grout is a ready-to-use (merely add water) Portland cement based grouting compound. It contains graded siliceous aggregate and chemical reagents which prevent shrinkage during curing. epidermix 344 is a two component, solvent free, polysulphide modified epoxy adhesive. If applied onto reinforcing steel it will cause no loss of concrete/steel bond strength and quickly develops place-able consistency and remains cohesive, does not segregate and shrink

X-Shield BugFill

X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.

Flooring Product Brochure

a.b.e.® Construction Chemicals‘ range of specialised floor coatings are screeds based on bitumen, dry shake cementitious materials, self levelling cementitious screeds, epoxies and polyurethanes. Typical applications are the protection of concrete floors and screeds against wear from traffic abrasion, as well as a range of chemical and thermal shock requirements. Certain products can also be used to provide decorative floor finishes to car showrooms, hardware stores, supermarkets and other retail outlets.

Expoxy Adhesive & Grout

TAL Epoxy Adhesive & Grout is a high performance, 3-component epoxy-resin adhesive for fixing tiles to walls and floors, and can also be used for subsequent grouting. TAL Epoxy Adhesive & Grout is suitable for use with glass tiles/mosaics and resin bonded tiles, and is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas, etc.  Tal Epoxy Adhesive & Grout is available in Light Grey and White

Epoxy Adhesive & Grout

TAL EPOXY ADHESIVE & GROUT is a high performance, 3-component epoxy-resin adhesive for fixing tiles to walls and floors, and can also be used for subsequent grouting.  TAL EPOXY ADHESIVE & GROUT is suitable for use with glass tiles/mosaics and resin bonded tiles, and is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas, etc.

X-Calibur® X-Tech DecoQuartz Range

TAL’s DecoQuartz Flooring Systems include: X-Tech DecoQuartz QB – Decorative colour quartz broadcast epoxy floor system, X-Tech DecoQuartz HT- Abrasion of heat resistant decorative epoxy floor screed, X-Tech DecoQuartz TF – Abrasion and chemical resistant decorative epoxy floor screed, X-Tech DecoQuartz EF – Decorative polyurethane floor and wall coat.

X-Tech EpoxySeal FLR100 Chemical resistant high build epoxy floor coating

TAL – X-Tech EpoxySeal FLR100 is a high performance, high build, solvent free epoxy floor coating that is also decorative and suitable for use in a wide range of applications. It can also be used as a wall coating.

Product Segments

a.b.e. Construction Chemicals product segments include concrete repair and protection, general construction, flooring, silicones, sealants and adhesives, waterproofing and high performance coating solutions…

X-Shield BugFill, General Use

TAL method statement on X-Shield BugFill, General Use and application

X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls

TAL – X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls application  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information  is a summary intended for guidance only.

Fusion Concrete look and feel, hybrid technology flooring

Fusion is a four component, self smoothing hybrid technology floor topping that produces a concrete look finish.


Copyright © 2019 New Media, a division of Media24. All rights reserved.