• Recommendations:

Search results for

coloured cement

Brochures & Datasheets

epidermix 318 | TWO COMPONENT EPOXY ADHESIVE/REPAIR COMPOUND

Two-component, solvent-free, filled, polyamide cured epoxy.

Wall & Floor Grout

Cementitious grout suitable for filling wall and floor tile joints between 2 – 8mm wide. Available in a variety of colours. Offers resistance to moisture ingress and fungal growth.

DecoCrete Shapeable textured plaster

Shapeable textured plaster

Colour Hardener Datasheet | Cemcrete

A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, lightfast pigments and certain additives which set rock-hard and which has exceptional abrasion resistance. Some cement floor finishing experience is required for the success of this application.

Seaqual Technical Data Sheet - HyDrain Complete Surface Drain

The HyDrain is an ideal cost-effective replacement for the traditional cast iron Full-Bore type and is specifically designed for use as a Full-Bore drain where needed and is supplied in an easy to use pack with comprehensive installation instructions for the installer/end users convenience. The HyDrain Complete comprises of the following components: The F-Box with a Retaining Ring (made from Hostaform) & Rubber Seal, forms the main body of the drain which houses components that produces a unique end-product and are available in both horizontal and vertical discharge points with two outlet sizes (50mm and 75mm). The F-Box is made from ABS (Acrylonitrile Butadiene Styrene) plastic for its durability and impact resistant properties. A Round Red Dust Cover which is made from HD-PE, is supplied for the protection of the F-Box during the construction phase. An M-sert Waterproofing Flange, manufactured from Glass-filled Nylon, which is compatible with most conventional methods and applications of waterproofing. A Domed Grate which is made from Polypropylene with added UV stabilisers to increase longevity in outdoor applications/installations and is specifically designed with two tiers to attempt to prevent blockage by debris and is the final step to achieving a High-Quality Full-Bore. It is supplied with 4x Nuts & Bolts for the fastening down of the Dome Grate and 4 x Finishing Plugs. 2.4.3 Key Benefits: 2.4.3.1 Easy to install and maintain ensuring a quality finish. 2.4.3.2 Manufactured from Green sustainable & recyclable materials 2.4.3.3 Domed Grate will not rust over time (Sea Quality, perfect for both coastal and inland installations!) 2.4.3.4 The F-Box with Ring & Seal ensures a watertight finish. 2.4.3.5 The Round Red Dust Cover protects the F-Box unit by preventing foreign objects from obstructing it during construction. 2.4.3.6 The M-sert Waterproofing Flange is height adjustable to obtain an optimal flush finish with the desired finish (tiles/screed etc). 2.4.3.7 Waterproofing Flange can be trimmed to fit awkward spaces. 2.4.4 Applications: ? Installation to concrete flat roofs and balconies for the effective drainage of rain/storm/surface water ? The pipeline can be connected to a rainwater harvesting system. ? Can be used inside roof-top planter boxes and or roof gardens.

RenoCrete | Spray-on textured floor overlay | Cemcrete

RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

CreteStain | Floor Finish | Acid-based cement / concrete stain

An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

CreteStain Datasheet | Acid-Based Mixture

An acid-based mixture containing special chemicals which reacts with the cement/concrete to colour the surface.

Marblefix

TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1 1/2 hour pot life.

X-Calibur® X-Tech SuperFlow

TAL’s  X-Tech SuperFlow is suitably designed for application onto concrete substrates. Allow all new concrete work and screeds to cure for at least 6 weeks and 4 weeks respectively before proceeding. The substrate must be structurally sound, clean and dry and free from all traces of surface laitance and contamination such as dust, dirt, waxes, oils, bitumen, old adhesives, paint, grease, weak cement screeds, shutter release and curing agents, sealing compounds, etc. All damaged, defective, deteriorated, friable (powdery) and hollow sounding areas must be removed until a solid background is achieved. These areas must be made good before proceeding.  The surface must be prepared, by captive blasting or grinding, to ensure that the aggregate in the concrete is fully exposed and open, ie to achieve a Concrete Surface Profile (CSP) of 5 or 6 (Medium Scarification).

DecoCrete | Shapeable Textured Plaster

A coloured, cement-based material formulated to be plastered to excessive thicknesses, but does not slide or shrink and dries rock hard. A textured shaping system for the creation of artistic finishes, such as rock features, imitation brick walls and pool copings.

X-Calibur® X-Tech StoneFlow

Tal’s X-Tech StoneFlow is a cement based self smoothing, heavy duty decorative screeding system which is supplied in a wide range of colours and aggregate finish and is shrinkage compensated and rapid setting. The system is specially designed for use in industrial, institutional, commercial and residential environments, on both new construction and renovation projects. It is designed for applications in cases of exposure to heavy traffic and abrasion.

Uniloc Range of Products

Union Tiles – Uniloc product catalogue

TAL Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

Cemcrete Products Brochure | Manufacturers of Distinctive Decorative Coatings

Cemcrete Products Brochure Since 1973 Cemcrete has manufactured a specialised range of cement-based coatings and building materials to finish and aid in construction projects. Cemcrete’s range of over 80 products includes cement-based finishes for walls, floors, countertops, pools and many more. These distinctive finishes are favourable among homeowners, architects and the construction industry in general due to their superior quality, excellent value, as well as offering a unique alternative to generic coatings.

Auria Cladding Colours

Colour choices for the Auria cladding range

Terra-Stone: Slim Line Terrazzo & Mediterranean Handcrafted Patterned Tiles

Terra-Stone is a technically advanced and chemically modified conglomerate tile, available in a slim line nominal 300x300x13mm full bodied terrazzo and nominal 600×600 and 600x900x20mm format. The tile is manufactured in a wide selection of standard colours. Architects and designers can however request custom mix designs and border mosaic accessories at a small premium, depending on the quantity.

Concrete Repair & Protection | Dura.®bond GP

Dura.®bond GP is a modified, single-pack acrylic emulsion which is milky in colour. Can be used as a primer/bonding medium for cementitious repairs to concrete elements in both internal and external applications…

abe.®cote 337 | Tough epoxy paint

abe.®cote 337 is a two component, solvent free, water-dispersed, polyamide cured epoxy.

Bond Powder

TAL BOND POWDER is a white-coloured special blend of dry-form polymer-based powder additives designed to enhance bond strength, flexibility, water resistance and reduced/elevated temperature resistance of cement based tile adhesives and grout.

Colour Hardener Dry-Shake Screed Floor Finish

Colour Hardener screed is a granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, light fast pigments and additives which set rock-hard.

abe® CEM-Blanc White Portland Cement

abe® CEM-blanc is a general purpose white Portland cement, specially manufactured to provide superior early strength with the added advantage of providing a wide range of aesthetic and decorative opportunities due to its key features of whiteness, high strength and durability. In addition to affording great design and colour versatility, abe® CEM-blanc complies fully with the requirements specified in SANS 50197-1 for type CEM II 42.SN cement.

BeadCrete | Unique pool plaster containing glass beads

Unique pool plaster containing glass beads A unique glass beaded decorative pool plaster for use on reinforced concrete pool interiors. The pure glass beads in BeadCrete produce a reflective surface that enhances water sparkle.

Seaqual BuddyBats 15mm Pipe Anchors / Pipe Fixing

BuddyBats are pipe anchors. Their function is to reduce water hammer caused by vibrations in pipes. Buddy Bats are available in 5 different colours: Black, Brown, White, Red & Blue. They can assist with pipe identification – Red for hot water pipes and Blue for cold water pipes. White BuddyBats can be painted if used on external walls. Brown is traditionally used for copper or brown polycop pipes, or to attach to roof trusses. Brown & Black are the most UV stabilised of all the colours and can be used for external pipe-work, although it is recommended that Nylon BuddyBats are rather used for this application.

Water Systems Sanware Product Guide | Franke | WC Pans, Sanitaryware and Laundry Products

FRANKE WC PANS ARE DESIGNED TO REDUCE WATER CONSUMPTION BY UP TO 60% WC Pans consume up to 90 percent of water usage in commercial buildings. New technology has been introduced to produce a new range that delivers high performance and aesthetically pleasing designs, to compliment the rest of the Franke sanitary ware products. Designed for ultimate hygiene solutions and ease of installation in public ablutions, the range caters for a wide variety of applications, from recreational facilities, shopping centres, petrol stations, airports and stadiums. Product features: • Hygienic, quality designs and excellent low water consumption • Aesthetically pleasing design, with satin finish • Pressed bowl and P-trap, with minimal welding through robotic welding technology • Full flush of 6 litres • Sturdy design and safety compliant with low maintenance compared with ceramic and composite materials

Union Tiles Plastex - Wall Plasters

Plastex is a cemetitous colourfast roman styled wall plaster for interior and exterior use.

RoofSeal Datasheet | Roof Waterproofing | Cemcrete

The RoofSeal Acrylic system embraces a primer/bonding coat, an impregnating RoofSeal coat, a very tough spun bonded polyester membrane, a second impregnating RoofSeal coat and, when all work is dry (minimum 3 days), a final RoofSeal coat. RoofSeal is waterproof, very durable and ultra-violet light resistant.

Quarrygrout

Cementitious grout suitable for filling wall and floor tile joints between 5 – 25mm wide.  Available in a variety of colours. Offers resistance to moisture ingress and fungal growth

Derbit | Derbicolor® FR

The DERBICOLOR FR membrane was developed through intensive research on the compatibility of raw materials. It unites a selection of the best bitumen and high-quality APP-TPO plastomers. Thus it is auto protected in the mass and has a durability of more than 30 years.

Water Systems Security Product Guide | Franke

FRANKE WC PANS ARE DESIGNED TO REDUCE WATER CONSUMPTION BY UP TO 60% WC Pans consume up to 90 per cent of water usage in commercial buildings. Franke’s range of WC Pans incorporates technology to reduce water consumption by up to 60%, offering high performance while saving water. Designed for ultimate hygiene solutions and ease of installation in public ablutions, the range caters for a wide variety of applications, from recreational facilities, shopping centres, petrol stations, airports and stadiums. Product features: • Hygienic • Excellent low water consumption • Aesthetically pleasing design, with satin finish • Pressed bowl and P-trap, with minimal welding through robotic welding technology • A full flush of 6 litres • Sturdy design and safety compliant with low maintenance compared with ceramic and composite materials

CemPlaster Datasheet | Cemcrete

A premium blend of OPC, quality graded aggregates, high-performance additives and fibres designed as a decorative coloured, and weatherproof skim plaster to be applied between 3mm and 5mm thick. CemPlaster is suitable as an interior or exterior application.

CemWash | Rough Textured Cement Wall Finish

A two-coat decorative, coloured, weatherproof cement finish; supplied as CemWash first coat grey and CemWash top coat in the colour of your choice. Having a base of Portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. The purpose is to provide a tough, durable cement-based coating directly to brick, block or hard cured plaster walls.

Catering & Industrial Products | Franke

Catering & Industrial products: sinks, tables, wall benches & shelving. Heavy duty industrial sinks and tables with sound deadening underframes. The range is complemented by a selection of modular designed shelving systems for catering applications.

Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

Franke Worktops Product Guide

Franke worktops offer a wide range of high quality worktop materials, with a comprehensive collection of colours. Thanks to their non-porous composition, worktops are easy to care for.

SatinCrete | Decorative Interior Coloured Plaster

SatinCrete is a thin skim, cement-based decorative plaster that creates a smooth, coloured finish for interior use only.

Colour Hardener Sealer | Cemcrete

A non-yellowing clear, thermoplastic acrylic lacquer-based resin which displays excellent UV stability. Has very fast solvent release, i.e. drying properties. The sealer greatly enhances the colour and protects the surface from the ingress of dirt and grease.

CreteCote Thin skim-on floor coating

CreteCote is a thin skim-on floor coating. A coloured, thin film cement-based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish ideal for internal domestic renovations. Comes complete with powder and catalyst as a twin pack.

Water Systems | Accessories, Grab Rails & Taps Product Guide

Water Systems | Accessories, Grab Rails & Taps Product Guide Every washroom has the potential to be wonderful and inviting Thanks to the innovative and intelligent washroom and sanitary solutions, Franke Water Systems is numbered among the leading suppliers worldwide for public, semi-public and commercial use. Here, Franke particularly concentrates on the development of complete sanitary systems, which are designed for durability, excellent quality, functionality and appearance.

Hospital & Mortuary Products | Franke

Franke is a leading supplier of sanitaryware products to hospitals, clinics and mortuaries – environments where hygiene is of the highest priority. Franke is certified to ISO9001: 2008 quality management standards. Our designs and construction ensure that our products meet the demands of safety, hygiene and quality. Products include Slop Hoppers, Drip Sinks, Bottle Racks, Bed Pan Wash-Ups, Surgeon Scrub Up Units, Plaster Of Paris Sinks and Baths. Franke is also a leading supplier of a large range of high-grade stainless steel equipment to mortuaries and post-mortem rooms including Autopsy Tables, Trolleys, Body Racks, Trays, Instrument Cabinets, Writing Desks, Shelving and Ventilated Mortuary Equipment.

Wall coatings: Promocor Background Plaster

Cementitious background plaster for Marmoran Stone Finish. Interior or exterior use. Protective and decorative coating. Natural or coloured stone aggregates embedded in a unique plaster formulation.

Goldstar 2

AL GOLDSTAR 2 is a grey ultra-fast setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. TAL GOLDSTAR 2 is ideal for remedial work and tiling in doorways and passages, where access is required soon after tiling.

Auria Facade Panels Lookbook

Projects using Auria fibre cement facade panels. Supplied by Everite these offer the architect both a visually appealing exterior finish and a resilient performing material for all weather conditions.

Pool Crack Filler Datasheet | Cemcrete

A heavily fibre-reinforced flexible paste which, after being allowed to dry, remains flexible under water.

CemCote (Skimmed) Datasheet | Cemcrete

CemCote Skimmed datasheet is a pigmented, thin film cement- based decorative wall covering which is versatile and durable. It is a two coat system which produces a 1.5mm smooth decorative finish suitable for application onto new plastered walls that have been sponge, wood or steel floated, or previously painted walls. It is ideal for internal and external domestic or commercial applications. CemCote can also be brush applied if a different finish is required. See CemCote (Brushed) datasheet.

X-Tech SuperFlow

X-Tech SuperFlow is a cement based self smoothing decorative screeding system which is supplied in a wide range of colours. It is shrinkage compensated and rapid setting. The system is designed to produce a hard wearing decorative floor surface suitable for residential and light commercial applications. It is suitable for interior applications only.

Colour Hardener Dry-shake screed floor finish

Dry-shake Screed Colour Hardener A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, lightfast pigments and additives which set rock-hard.

Wall & Floor Grout

TAL WALL & FLOOR GROUT is suitable for filling wall and floor tile joints between 2 – 8mm wide.  Available in a variety of colours, they offer resistance to moisture ingress.

abe dura® proof cem block

dura.®proof cem block is a powdered waterproofing admixture that when added to Portland cement plaster or mortar mixes obstructs the capillaries and restricts moisture movement.

Sikafloor Garage: 2-part water based epoxy coating

Sikafloor® Garage is a two part, water dispersed, coloured, epoxy resin based coating. that can be used for concrete, cement screeds, broadcast systems and epoxy mortars. It can be subjected to normal up to medium heavy mechanical and chemical loading and is used for production areas, warehouses, car park decks, garages, etc.

Evolutionary Pavers and Cobbles

Union Tiles range of Evolutionary Pavers and Cobbles include: mono coloured simulated stone pavers, smooth rustico paver cement finish, mottled simulated stone pavers, semi-polished simulated elephant hide, honed textured pavers, carpet stone pavers, carpet stone recycled glass pavers.

SatinCrete Decorative interior coloured plaster

SatinCrete is a thin skim, cement-based decorative plaster that creates a smooth, coloured finish for interior use only.

Seaqual BuddyBats 22mm Pipe Anchors / Pipe Fixings

BuddyBats are pipe anchors. Their function is to reduce water hammer caused by vibrations in pipes. Buddy Bats are available in 5 different colours: Black, Brown, White, Red & Blue. They can assist with pipe identification – Red for hot water pipes and Blue for cold water pipes. White BuddyBats can be painted if used on external walls. Brown is traditionally used for copper or brown polycop pipes. Brown & Black are the most UV stabilised of all the colours and can be used for external pipe-work, although it is recommended that Nylon BuddyBats are rather used for this application.

Johnson Tiles | Ceramic Tiles: Screed

A matt, scuffed cement look on a flat surface. Available in the following colours: Screed Fawn, Screed Storm and Screed Biscuit.

CemCote Skimmed | Trowel-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

Franke | Zip Product Range

The new Zip HydroTap G4 range, instantly filtered, boiling, chilled and sparkling water on tap.

Seaqual HyDrain F-Box Full-Bore HyDrain 2nd Fix

The HyDrain 2nd Fix comprises of the following components: A Waterproofing Flange, manufactured from Glass-filled Nylon, which is compatible with most conventional methods and applications of waterproofing. A Domed Grate which is made from Polypropylene with added UV stabilisers to increase longevity in outdoor applications/installations and is specifically designed with two tiers to attempt to prevent blockage by debris and is the last step to achieving a High-Quality Full-Bore. It is supplied with 4x Nuts & Bolts for the fastening down of the Dome Grate and 4 x Finishing Plugs.

Talfix

TALFIX is a grey quick-setting high-strength cement based adhesive ideally suited for, but not restricted to, smaller DIY installations and tile replacements. Suitable for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors.

CreteCote Thin Skim-On Floor Coating

A coloured, thin film cement based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish ideal for internal domestic renovations. Comes complete with powder and catalyst as a twin pack.

Seaqual HyDrain 1st Fix Packs: Technical Data Sheet

The HyDrain 1st Fix consists of a F-box that acts as a reducer that is available in 4 different outlets for easy pipe connections as well as a dust cover for protection during construction. This product together with the HyDrain 2nd Fix acts as a full-bore and is a suitable replacement to the common cast iron full-bore that has traditionally been installed on flat concrete roofs to drain rainwater.

TexCrete Fibre-cement casting mix

Fibre-cement casting mix

CemPlaster Coloured fibre-reinforced plaster

Coloured fibre-reinforced plaster

CreteStain | Wall Finish | Acid-based cement / concrete stain

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

Marbleflex

TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

CemPlaster | Coloured Fibre-Reinforced Plaster

Coloured fibre-reinforced plaster. Provides a tough, mottled, coloured exterior or interior plaster onto conventional wood floated or scratch plaster that is UV resistant. A premium blend of OPC, quality graded aggregates, high-performance additives and fibres designed as a decorative coloured, and weatherproof skim plaster to be applied between 3mm and 5mm thick. CemPlaster is suitable as an interior or exterior application.

Professional White

TAL PROFESSIONAL WHITE is a white (light-coloured) general-purpose standard-setting cement based powder adhesive especially formulated for fixing white and light coloured ceramic tiles which are susceptible to glaze discolouration due to moisture pull through (ie grey adhesive shows through the light-coloured body of the tile). TAL PROFESSIONAL WHITE can be used for ceramic wall and floor tiles and was designed for easy use, allowing up to 3 hours pot life after mixing.

SculptCrete Fibre-cement mixture for art pieces

Fibre-cement mixture for art pieces

Tile-to-Tile

TAL Tile-To-Tile is a grey quick-setting high-strength cement-based adhesive specially formulated for fixing most types of tiles onto smooth and dense surfaces such as existing tiles, powerfloated screeds, etc.  TAL Tile-To-Tile is suitable for fixing tiles to walls and floors, in interior and exterior applications.  Priming of some substrates may not be required due to the superior adhesion properties of this product.  The adhesive was designed for easy use, allowing a 4 hour pot life.  TAL Tile-To-Tile should not be used with white or light-coloured porous natural stone tiles, where a grey adhesive may show through the tile in the form of ‘staining.

Sealers | Transparent Protective Coatings

Protecting cement finishes with a good quality Cemcrete sealer is crucial and not only makes the surface easier to clean, it offers other benefits as well, such as enriching the colour intensity of the overlay, blocking the penetration of stains, and improving water repellency and abrasion resistance.

Deko Product Guide | Franke

Hygiene is the essential first step in the preparation of reusable medical devices for disinfection. Franke’s Deko units are automatic microprocessor controlled washer-disinfector units for medical and laboratory installations such as hospital, clinic, pathology, dentistry and veterinary applications. The range includes instrument washer and disinfection units, as well as bedpan washer and disinfection units.

Van Acht Glass & Aluminium Windows & Doors

At VAGA ( Van Acht Glass and Aluminium) we strive to maintain the same quality and service with which we have been associated with over the last 30years. Advantages of ALUMINIUM – Strong material – Larger sizes available – Longevity and low maintenance – Strong market awareness – Availability – Versatile – Wide price range

Johnson Tiles | Ceramic Inkjet Tiles: Moyo Pier

An impressive matt weathered and variable cement appearance. Available in the following colours: Moyo Pier Rust and Moyo Pier Grey.

Geberit Know-How Customer Magazine (March 2018)

Read up about the new ACANTO BATHROOM SERIES, designed specifically for the diverse requirements of the consumer and the GEBERIT VARIFORM WASHBASINS, a new range of under-countertop, countertop and lay-on washbasins in a variety of different sizes and shapes to complement the Geberit bathroom series range. We are excited to introduce a new compact and versatile addition to the Geberit AquaClean family – TUMA CLASSIC AND COMFORT SHOWER TOILET, plus so much more.

X-Tech SuperFlow, General Use (For Interior Use Only)

TAL  x-tech superflow  general use and the method on how to apply it

Cemcote Brushed | Brush-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

Cemcrete | Wall Products

Cemcrete Wall Products Wall Preparation Products, Trowel-on & Brush-on Wall Finishes & Sealers

Mortar Mix - Coloured Datasheet | Cemcrete

A coloured masonry Mortar Mix comprising white cement, graded sand and certain additives to give high bond strength, waterproof joints and high water retention for workability and plasticity. Good water retention gives improved bond and bleeding characteristics. Also has excellent water absorption qualities.

Goldstar 12

TAL GOLDSTAR 12 is a grey quick-setting high-strength cement-based adhesive for fixing porcelain, granite, dark-coloured marble and natural stone, ceramic, clay and terrazzo tiles to walls and floors. The adhesive was designed for easy use, allowing a 4 hour pot life.

RenoCrete Datasheet | Cemcrete

Concrete Resurfacing Solution Cemcrete’s RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

Johnson Tiles | Ceramic Inkjet Tiles: Crete

Crete ceramic inkjet tiles have a matt tinted flat cement appearance. Available in the following colours: Crete Sand and Crete Bone.

Anchor Grout Datasheet | Cemcrete

Anchor Grout is a rapid set ready-for-use (merely add water) Portland cement-based grouting compound. It contains chemical reagents which prevent shrinkage during curing.

Goldstar 18

TAL Goldstar 18 is a grey quick-setting high-strength cement based adhesive for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors. The adhesive was designed for easy use, allowing an 8 hour pot life. TAL Goldstar 18 can be applied in bed thicknesses between 3 – 6mm, and up to 12mm in isolated areas only.


Copyright © 2019 New Media, a division of Media24. All rights reserved.