• Recommendations:

Search results for

cementitious coatings

Brochures & Datasheets

CemBond | Polymer-Based Bonding Liquid

To dispense with hacking when plastering, tiling or painting onto smooth or friable surfaces. It can be used as an adhesive, a bonding liquid for friable surfaces, as a primer for PVA and acrylic paints, as a cement additive to improve adhesion, mixed with cement as a crack filler and mixed with propriety crack fillers to limit “ghosting” of filled spots when over coating with paint. It can be used in plaster mixes to improve the strength and integrity of the plaster and is invaluable for improving the adhesion of cement-based decorative coatings to difficult surfaces.

Primer Aggregate Graded Silica Sand for Mechanical Keying and Slip Resistance

TAL Primer Aggregate is high-quality well-graded silica sand.  It provides a mechanical key for resin flooring systems as well as cementitious screeds/toppings/underlayments. TAL Primer Aggregate is also used in conjunction with TAL resin flooring and coating systems to provide a slip resistant finish. Available in Fine (SQ1), Medium (SQ2) and Coarse (SQ3).

X-Pruf CrystalCoat

X-Pruf CrystalCoat is a one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure.

abe® peel & stick membrane

abe® peel & stick membrane is a universal, self-adhesive waterproofing membrane comprising of a unique ethylene polymer modified bitumen, incorporating an exposed spunbond, non-woven, polypropylene fabric that is alkali resistant to receive cementitious and water based acrylic resin coatings and adhesive systems.

abe® Project | Kanengo Silo Project - Concrete Repair

The rehabilitation of the grain silos. The repair and upgrade was carried out by using abe®silocoat – an elastomeric cementitious waterproofing coating that cures to form an impermeable membrane. abe®silocoat is a two component polymer modified cementitious coating, supplied in a pre-packaged form.  Advantages are excellent crack accommodation after immersion, effective barrier to sulphates and chlorides and low pH.  Withstands high positive and negative hydrostatic pressures. abe® silocoat is approved for use in contact with portable water.

RenoCrete Datasheet | Cemcrete

Concrete Resurfacing Solution Cemcrete’s RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

CreteCote Thin Skim-On Floor Coating

A coloured, thin film cement based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish ideal for internal domestic renovations. Comes complete with powder and catalyst as a twin pack.

Kaytech | Concrete Canvas | Geosynthetic Cementitious Composite Mats

Concrete Canvas is part of a class of construction materials called Geosynthetic Cementitious Composite Mats (GCCMs). It is a flexible, concrete impregnated fabric that harden on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. It is used in channel lining, slope protection, bund lining, remediation of existing concrete structures, and culvert lining.

SikaTop Seal-107 ZA

SikaTop® Seal-107 is a two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. SikaTop® Seal-107 complies with the requirements of EN 1504-2 as protective coating.

SatinCrete | Decorative Interior Coloured Plaster

SatinCrete is a thin skim, cement-based decorative plaster that creates a smooth, coloured finish for interior use only.

Skimcoat

Marmoran Skimcoat is a cementitious preparation plaster formulated to face up off shutter concrete, or any surface imperfection on substrates. Characterised by its ease of application, this non shrink product may be over coated directly with conventional coatings. Marmoran Skimcoat may be applied by trowel, brush, and roller or sprayed to match surrounding surfaces.

Wall coatings: Promocor Background Plaster

Cementitious background plaster for Marmoran Stone Finish. Interior or exterior use. Protective and decorative coating. Natural or coloured stone aggregates embedded in a unique plaster formulation.

Waterproofing Products | a.b.e Construction Chemicals

a.b.e.® Construction Chemicals‘ range of waterproofing products and systems include specialised bituminous sheets, liquids, putties, cementitious based products and silanes. Bituminous sheet products are used to waterproof flat roofs, basement walls and to line earth dams and canals. Liquid systems and putties including acrylics, solvent-based bitumens and water-based rubberised acrylic modified bitumens which are used to seal parapet walls, small flat roofs, roof bolts, flashings and ponds. Cementitious slurry products are used to waterproof basements, foundations, tunnels, retaining walls, brickwalls and other underground structures. The silane systems are used to prevent water penetration of brick and natural stone.

abe.® screed dura.® Top

abe.®screed dura.®Top is a single component, quick hardening, self-smoothing, shrinkage compensated cement based overlay for levelling floors.

RenoCrete | Spray-on textured floor overlay | Cemcrete

RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

abe.®cote 337 | Tough epoxy paint

abe.®cote 337 is a two component, solvent free, water-dispersed, polyamide cured epoxy.

Superscreed | Thin High-Strength Screed

A 10-20mm high-strength, shrinkage compensated granolithic type screed mix.

Permastop - Crystalline waterproofing treatment

Permastop is a Crystalline waterproofing treatment. A cement-based mixture containing chemicals which combine with the water in cement and migrate into the concrete or cement plaster thereby effectively waterproofing the structure against hydrostatic pressure. For slurry coatings and plugging holes. For solving most types of waterproofing problems in belowground and water-containing structures that contain OPC.

Product Segments

a.b.e. Construction Chemicals product segments include concrete repair and protection, general construction, flooring, silicones, sealants and adhesives, waterproofing and high performance coating solutions…

Africote Waterproofing Products

Africote Waterproofing Products Platinum Waterproofing – Dual cementitious / acrylic based waterproof coating Bitumen Aluminium – rust inhibitive coating Fibreshield – with fibre Watershield – without fibre

Flooring Product Brochure

a.b.e.® Construction Chemicals‘ range of specialised floor coatings are screeds based on bitumen, dry shake cementitious materials, self levelling cementitious screeds, epoxies and polyurethanes. Typical applications are the protection of concrete floors and screeds against wear from traffic abrasion, as well as a range of chemical and thermal shock requirements. Certain products can also be used to provide decorative floor finishes to car showrooms, hardware stores, supermarkets and other retail outlets.

Cemcote (Brushed) Datasheet

CemCote (Brushed) is a finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water on-site to produce a smooth, flowing coating which sets rock hard and is unaffected by UV light. CemCote can also be skimmed if a different finish is required. See CemCote (Skimmed) datasheet.

Anchor Grout Datasheet | Cemcrete

Anchor Grout is a rapid set ready-for-use (merely add water) Portland cement-based grouting compound. It contains chemical reagents which prevent shrinkage during curing.

General Construction & Concrete Repair

The General Construction and Concrete Repair manual includes adhesives, coatings / sealers, spalling repair systems, primers, waterstops, protective coatings, fairing, reprofiling, crack injection systems, cementitious grouts / mortars, epoxy mortars / grouts…

Cemcrete | Wall Products

Cemcrete Wall Products Wall Preparation Products, Trowel-on & Brush-on Wall Finishes & Sealers

CemCote | Cement Wall Coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

CreteStain | Wall Finish | Acid-based cement / concrete stain

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

MatCrete - reinforced concrete waterproof lining

Waterproof cement lining that can be applied directly onto hard compacted soil for the cost-effective creation of any water-containing structures such as fish ponds, water channels, dams, drinking troughs, relining of pipes, repair of old cracked reservoirs, flat roof waterproofing, parapet waterproofing etc.

CreteCote Thin skim-on floor coating

CreteCote is a thin skim-on floor coating. A coloured, thin film cement-based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish ideal for internal domestic renovations. Comes complete with powder and catalyst as a twin pack.

Cemcrete Products Brochure | Manufacturers of Distinctive Decorative Coatings

Cemcrete Products Brochure Since 1973 Cemcrete has manufactured a specialised range of cement-based coatings and building materials to finish and aid in construction projects. Cemcrete’s range of over 80 products includes cement-based finishes for walls, floors, countertops, pools and many more. These distinctive finishes are favourable among homeowners, architects and the construction industry in general due to their superior quality, excellent value, as well as offering a unique alternative to generic coatings.

Interior Paint & Decor Plasters

Africote’s products and services include: acrylic paints, cement paints, wall plasters and renderings, flooring products, decorative paints, solvent based paints, surface preparation products, primers, sealers, waterproofing products, low cost housing products…

Travertino Stucco

Travertino Stucco provides a beautiful antique finish with a rustic charm.

CemWash | Rough Textured Cement Wall Finish

A two-coat decorative, coloured, weatherproof cement finish; supplied as CemWash first coat grey and CemWash top coat in the colour of your choice. Having a base of Portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. The purpose is to provide a tough, durable cement-based coating directly to brick, block or hard cured plaster walls.

Cemcote Brushed | Brush-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

Concrete Repair & Protection | Silocoat

abe® silocoat is a two-component polymer modified cementitious coating, supplied in a pre-packaged form. The product has been designed to be easily mixed on-site using a slow speed drill and paddle, and then applied to the substrate using a brush, roller or airless spray application. abe® silocoat cures to form an elastomeric impermeable membrane.

Unicemtex - Rustic Interior or Exterior wall coating

Unicemtex is a weather resistant coating ideal for boundry walls of townhouse complexes and cluster homes.

Union Tiles Unicemtex - Wall Coatings

Unicemtex is a weather resistant rustic cementitious wall coating for both interior or exterior use.

CemCote (Skimmed) Datasheet | Cemcrete

CemCote Skimmed datasheet is a pigmented, thin film cement- based decorative wall covering which is versatile and durable. It is a two coat system which produces a 1.5mm smooth decorative finish suitable for application onto new plastered walls that have been sponge, wood or steel floated, or previously painted walls. It is ideal for internal and external domestic or commercial applications. CemCote can also be brush applied if a different finish is required. See CemCote (Brushed) datasheet.


Copyright © 2019 New Media, a division of Media24. All rights reserved.