Lifting Stations and Pumps
Wastewater drainage systems
Lifting stations and pumps for domestic and commercial wastewater
People who use drainage objects such as washing machines, showers or a toilet in their basement must consider how the wastewater from the object is to reach the sewer. If there is no natural gradient to the sewer, the wastewater must be lifted above the backwater level using a lifting station or pumping station so that it can then flow into the sewage system.
Suitable lifting station on the basis of wastewater type
In addition to the pumping height, the type of wastewater is an important criterion for the selection of a suitable lifting station. This is determined on the basis of the drainage objects connected. Wastewater without sewage (grey water) from washing machines, showers and bathtubs can be disposed of using wastewater lifting stations such as Aqualift S or Minilift. For wastewater containing sewage (black water) from toilets and urinals, special lifting stations for wastewater with sewage must be used, such as the Aqualift F or Minilift F.
Lifting Stations for wastewater with or without sewage (black water)
Lifting Stations for wastewater without sewage (grey water)
Pumping Stations for outdoor underground installation
Submersible Pumps
Lifting Stations for wastewater with or without sewage (black water)
The spectrum of our lifting stations for wastewater containing sewage ranges from small systems for individual toilets for private use through to systems for complete wastewater discharging in the commercial and industrial sector. Our lifting stations offer maximum flexibility in terms of installation options as well. Alongside free-standing lifting stations, we also have versions for installation in the concrete slab or for outdoor underground installation.
Lifting stations for installation in a concrete slab/floor
- Aqualift F Compact
Lifting station for the complete basement drainage. Powerful, compact and reliable. Chamber ready for installation in a concrete floor, with integrated drain function to discharge surface water.
Lifting Stations for free-standing set-up
- Minilift F
extremely compact lifting station for connection to a single toilet and two additional fixtures (e.g. sink, shower, urinal, bidet) in rooms below the backwater level or without sufficient gradient to the next sewage collecting pipe.
- Aqualift F Basic
The economic solution for domestic wastewater disposal. Simple to install or mount in a small space. Including KESSEL control unit Aqualift Basic 230 V.
- Aqualift F
Domestic wastewater lifting station for single-family homes. Simple to install or mount in a small space. Also available as twin lifting station Aqualift F Duo for apartment blocks or small scale industrial use.
- Aqualift F XL
Twin lifting stations for industrial / high volume wastewater disposal. For example for lifting rainwater which occurs below the backwater level, or for use with a separator. Available with 200, 300 and 450 liter tank volume.
Lifting Stations for wastewater without sewage (grey water)
The spectrum of our lifting stations for wastewater without sewage ranges from small systems for individual drainage objects such as showers, sinks or washing machines to Duo systems for commercial use. There is a choice of lifting stations available for installation in a concrete slab, for free-standing set-up or for outdoor underground installation:
Products for fee standing set-up
- Minilift
Compact wastewater lifting station for one-familly homes (ideal for renovation).
- Twin lifting station (Aqualift S Duo)
Wastewater in appartment blocks and industrial use (e.g. grease separator)
Products for installation in a concrete slab/floor
- Minilift S
Compact wastewater lifting station for one-familly homes. With integrated drain function.
- Aqualift S Compact
Wastwater lifting station for one-family homes. Available as single pump lifting station with float control, or as twin pump system with sensor and control unit.
Pumping stations for outdoor underground installation
Up to now, lifting stations for the disposal of wastewater occurring below the level of the sewage channel have mainly been installed in buildings. In the meantime, however, new methods are being pursued. In order to gain more useful space in the basement and enhance living comfort by getting rid of pumping operation noise, a service and inspection chamber housing the lifting station is installed outside the building.
Depending on the requirements, pumps for wastewater with and without sewage, single and twin stations can be fitted in the various in-house developed pumping stations.
Pumping stations for wastewater with sewage
- Aqualift F Basic
Favourably priced pumping station Aqualift F Basic with vortex impeller pump/s in compact chamber system. Pressure pipe connection Ø 63 mm.
- Aqualift F
Medium sized pumping station Aqualift F with macerating / cutting pumps in chamber system Ø 600. Pressure pipe connection Ø 40 mm.
- Aqualift F XL (ATEX)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage (ATEX version). The tank volume is approx. 680 litres, the maximum pumping volume is between 300 and 310 litres. Pressure pipe connection Ø 90 mm.
- Aqualift F XL (Multi-vane impeller)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage (Multi-Vane Impeller). The tank volume is approx. 680 litres, the maximum pumping volume is approx. 340 litres. Pressure pipe connection Ø 90 mm.
- Aqualift F XL (Single-Channel Impeller)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage (Single-Channel Impeller). The tank volume is approx. 680 litres, the maximum pumping volume is approx. 350 litres. Pressure pipe connection Ø 90 mm.
- Aqualift F XL (Dry Set-Up)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage. High pumping capacity to pump wastewater from basements. Optimum servicing possible due to dry set-up within the chamber. Pressure pipe connection Ø 90 mm.
Pumping stations for wastewater without sewage
- Aqualift S Favourably priced pumping station Aqualift S with multi-vane impelleller pumps in compact chamber system Ø 600 mm. Pressure pipe connection Ø 40 mm.
- Aqualift S XL Pumping station Aqualift S XL in an engineering system chamber Ø 1000 mm. For wastewater without sewage or rainwater. Large tank volume of approx. 680 litres in combination with a high pumping capacity to pump wastewater from basements. Pressure pipe connection Ø 40 mm.
Submersible Pumps
Mobile submersible pumps for use in agriculture, industry and trade as well as in private households. The submersible motor pumps are suitable for mobile pumping of larger quantities of clear water, rainwater and soiled water. Swimming pools, ponds, excavations, different tanks, shafts etc. can be pumped empty without any problems thanks to the range of alternative connection options.
Connection is made at the side at flat and broad water points, vertically for deeper and narrow containers. The KTP pumps are set at the lowest point of the basin etc. and can neither lurch nor tilt thanks to the two alternative connection options.
- Absolutely corrosion-free
- Pressure pipe connection vertical or at the side R1 1/4
- Vertical connection for deep and narrow containers
- Connection at the side for flat and broad water points
Pump types:
- KTP 300
Input Power (P1): 280 W
Voltage: 230 V
Operating Mode: S1
Pumping Volume: max. 8 m3/h
Pumping Height: max. 6 m - KTP 500
Input Power (P1): 480 W
Voltage: 230 V
Operating Mode: S1
Pumping Volume: max. 8 m3/h
Pumping Height: max. 8 m - GTF 1000
Input Power (P1): 1080 W
Voltage: 230 V
Operating Mode: S3 30%
Pumping Volume: max. 11,5 m3/h
Pumping Height: max. 10 m
Control units and alarms
The warning and control units can be used for a wide range of purposes e.g. as warning devices in household and industrial systems as well as for connection to a remote signal sensor.
The warning and control units with potential-free contact can be connected to the building management system (BMS). The electronic sensors react to all conductive fluids and the optical sensors to all conductive and non-conductive fluids.
Professional advantages:
- READY FOR CONNECTION
230 Volt control unit ready for connection by coded connectors for pumps and pressure sensor – no need for a qualified electrician for connection.
- INTEGRATED SELF-DIAGNOSIS-SYSTEM
With integrated Self-Diagnosis-System and battery buffering continually monitors all electronic functions.
- TeleControl TELEMETRIC SYSTEM
For connection to KESSEL Comfort control units 230 Volt and 400 Volt. Relaying of full text messages to up to three mobile phones. Without SIM card.
- ATEX VERSION
400 Volt control unit available in ATEX versions suitable for installation in potentially explosive atmospheres.
- POTENTIAL-FREE CONTACT
BMS (Building Management System) connection standard with all 400 Volt systems (optional with 230 Volt systems).
- PROBES
Connection possibilities for numerous probes for level measurement, float switches, conductance probes (230 V only), plungers, optical probe (230 V only), level probe (on clamping strip).
- OPERATIONAL PARAMETERS
Operational parameters can easily be custom set by operator – Control unit also for use with pumps from other manufacturers.
- MENU NAVIGATION
User-friendly menu navigation in six languages with multi-lingual display.
- USB-CONNECTION PORT
Includes internal USB connection port for 230 Volt control units. For read-out of electrical logbook and down / uploading of operational parameters.
- ELECTRONIC LOG-BOOK
Electronic log-book function past history of pump operation is shown on digital control unit display.
