Single Pack Polyurethane coating/sealer

DIV 614 is a single pack polyurethane sealer which is characterised by exceptional toughness and good flexibility. It has good adhesion to most sound, suitably prepared surfaces and inter-coat times should not exceed 12 hours. The rate of cure is affected more by the ambient humidity and film thickness than temperature.  As the product is based on an aromatic isocyanate it will yellow and weather upon exposure to sunlight.

Surfaces should be clean, dry and sound during application, all loose material should be removed and there should be no oil, grease or other chemical contamination.

Single pack system, easy to apply, high gloss, available as a clear product or in grey. Can be used as a sealer for concrete floors and damp-proofing systems. Acts as a tough, flexible water resistant coating on surfaces exposed to damp and moisture, and where all round properties is a requirement.

  • Tough system that is flexible and water resistant
  • Can be used as a sealer and a damp proofing system
  • Easy to apply
  • Can be used in areas of high traffic
Solid Content48-53%
Flash Point27 degrees C
Application temp5-35 degrees C
Application Humidity30-80% RH
Full cure7 days
Maximum service temp80 degrees C
Chemical resistanceMild acids, alkalis, fuel oils and salt solutions
Packaging5 litres, 25 litres