Adhesives, Sealants and MasticsAcrylic SealantsAcrylic-Based AdhesivesAdhesive TapesBandage Joint SealantsBitumen AdhesivesCement-Based AdhesivesConcrete Repair MaterialsContact AdhesiveCrack FillersEpoxy AdhesivesFire Protective Joint SealantsFloor AdhesivesGlazing ChannelGlazing CompoundsGlazing PuttyHeavy Duty Joints ExpansionJoint FillersJoint Sealing CompoundsJoint Sealing ServiceLight Duty Joints ExpansionMasonry FillerNatural AdhesivesNatural ResinsNeoprene GasketsP.U. SealantsPitchPolyurethane AdhesivesPreformed Flexible Joint SealantsPreformed Resilient Joint SealantsPVA AdhesivesRubber GasketsRubber-Based AdhesivesSilicone SealantsSynthetic Resin Epoxide AdhesivesSynthetic Resin Phenol / Resorcinol AdhesivesSynthetic Resin Urea / Formaldehyde AdhesivesSynthetic ResinsThermoplastic AdhesivesTile AdhesivesTile SealersWallcovering Adhesives
AL GOLDSTAR 2 is a grey ultra-fast setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. TAL GOLDSTAR 2 is ideal for remedial work and tiling in doorways and passages, where access is required soon after tiling.
TAL GOLDFLEX ULTRA is a high strength, ultra flexible rapid setting grey cement based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for elevated flexibility and water resistance while maintaining ultra-tensile strength, usually only achieved by the addition of latex admixtures. The incorporation of dry-form polymers replaces the need for a latex bonding additive. Only clean water needs to be added, reducing mixing errors on site. It is suitable for using in all interior and exterior wall and floor applications and finds special use in fixing of glass tiles
TAL PROFESSIONAL WHITE is a white (light-coloured) general-purpose standard-setting cement based powder adhesive especially formulated for fixing white and light coloured ceramic tiles which are susceptible to glaze discolouration due to moisture pull through (ie grey adhesive shows through the light-coloured body of the tile). TAL PROFESSIONAL WHITE can be used for ceramic wall and floor tiles and was designed for easy use, allowing up to 3 hours pot life after mixing.
TAL STIX is a grey general-purpose cement based powder adhesive for fixing ceramic wall and floor tiles in interior and exterior installations, and was developed for the DIY market. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing.
TAL Tile-To-Tile is a grey quick-setting high-strength cement-based adhesive specially formulated for fixing most types of tiles onto smooth and dense surfaces such as existing tiles, powerfloated screeds, etc. TAL Tile-To-Tile is suitable for fixing tiles to walls and floors, in interior and exterior applications. Priming of some substrates may not be required due to the superior adhesion properties of this product. The adhesive was designed for easy use, allowing a 4 hour pot life. TAL Tile-To-Tile should not be used with white or light-coloured porous natural stone tiles, where a grey adhesive may show through the tile in the form of ‘staining.
TAL GOLDFLEX is a grey flexible rapid-setting high-strength shrinkage-compensated cement-based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for flexibility, water resistance and increased strength, usually only achieved by the addition of latex admixtures. Only clean water needs to be added, reducing mixing errors on site.
TAL PORCELAINFIX is a grey quick-setting high-strength shrinkage-compensated cement based adhesive for fixing porcelain tiles. It can also be used to fix other types of tiles. The adhesive was designed for easy use, allowing a 4 hour pot life
TAL - Screedbinder applied as a primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.
Fusion is a four component, self smoothing hybrid technology floor topping that produces a concrete look finish.
X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.
Quick Set 6 is a cement-based, high strength, quick-set, thick to thin (3-20 mm) bed tile adhesive for the fixing of porcelain, ceramic, brick, clay, cement and natural stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site. The 6 hour set makes it ideal for quick installations.
Ultra-flex is a highly deformable, high strength, rapid-set cement-based tile adhesive for wall and floor applications. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site. Ultra-flex is used for fixing porcelain, dark marble, granite, ceramic, stone, brick and clay tiles...