An important consideration when building with timber is predicting how long the structure will last. Whilst insects, decay or rotting organisms and marine borers can all attack wood, some timber species have the ability to resist attack better than others. The natural durability of a species to resist attack by wood destroying organisms is an indication of how long that timber will last when it is exposed to a defined set of exposure conditions without any additional preservative protection. The natural durability of timber species varies, even so within the wood from the same species of tree, depending on whether its sapwood or heartwood.
According to NRCS VC 9092, The Compulsory Specification for Preservative Treated Timber, any preservative treated timber product claiming to be preservative treated must be branded as specified in the relevant SANS product standards. An important part of the brand is the Hazard Class, which indicates the service conditions to which the product is exposed and the level of treatment or level of protection that must be applied to the wood. The Hazard Classes have been defined as follows…
This Guidance Note addresses the importance of the use of properly preservative treated timber in the construction of substructures for timber decks and its compliance with the requirements as stipulated in the Building Regulations and relevant SANS Standards.
IN SOUTH AFRICA TREATED TIMBER IS BY LAW REQUIRED TO COMPLY WITH NATIONAL AND COMPULSORY SPECIFICATIONS AND MUST BEAR MARKING CONTAINING THE FOLLOWING INFORMATION
Plaster of Paris Sink Standard Features • Grade 304 ( 18/10 ) stainless steel • Pressed bowl and discharge pipe from bowl to waste cylinder • Removable waste cylinder bucket • 150mm splashback
Slop Hopper Model SH or Model SHL Standard Features • Grade 304 (18/10) stainless steel 1.2mm gauge • 100mm splashback to back and sides • Hygienic and rigid construction • Sturdily hinged bucket grid • The outlet is designed to suit a standard 110mm PVC or cast iron “P”-Trap • Removable strainer grid to prevent blockage as standard • Optional hinge lid (Model SHL)
Janitor Sink Combination cleaner sink with hand wash basin • Ideal solution for cleaner rooms • Heavy-duty construction grade 304 ( 18/10 ) stainless steel • Heavy-duty adjustable foot pieces • “ Flip Grid” to facilitate storage of bucket above cleaner sink • Service panel to facilitate maintenance • Tap: An extractable tap is recommended
A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.
CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.
An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.
abe® Rustopak Red Penetrant Sealant is a low VOC penetrating liquid used in conjunction with abe® Rustopak Top Coat. It is a single component, specifically compounded system, bound together with a calcium sulfonated alkyd in an aliphatic hydrocarbon that is applied over surfaces with tightly adherent rust and also hard to reach areas such as crevices which are properly sealed off without the need of dismantling equipment.
abe® Rustopak Top Coat is a low VOC, active rust inhibitive sealant, for use as a single coat direct to metal (DTM) that does not have to be rust free. Tightly adhered rust on structural steel must be without contaminants like oil, grease, salt, etc.
abe® peel & stick membrane is a universal, self-adhesive waterproofing membrane comprising of a unique ethylene polymer modified bitumen, incorporating an exposed spunbond, non-woven, polypropylene fabric that is alkali resistant to receive cementitious and water based acrylic resin coatings and adhesive systems.
abe.®proof liquid membrane primer is a single pack, solvent borne, liquid primer applied to most building substrates, this would include: abe.®proof liquid membrane primer can be used to prime most building substrates typically: • Porous surfaces, deficient bituminous surfaces, wood as well as sound concrete and non-porous screeds • A surface conditioner to obtain optimum performance from the products applied as top coats
dura.®proof cem block is a powdered waterproofing admixture that when added to Portland cement plaster or mortar mixes obstructs the capillaries and restricts moisture movement.
abe® CEM-blanc is a general purpose white Portland cement, specially manufactured to provide superior early strength with the added advantage of providing a wide range of aesthetic and decorative opportunities due to its key features of whiteness, high strength and durability. In addition to affording great design and colour versatility, abe® CEM-blanc complies fully with the requirements specified in SANS 50197-1 for type CEM II 42.SN cement.
The ultimate seamless gutter. WeatherMaster Ogee (Old Gothic) gutters are roll-formed on site from our mobile gutter machine in exact made to measure lengths. Sun Control Products offer a complete service, from the on-site assessment to breaking down and removing old gutters…
The WeatherMaster adjustable louvre awning with remote control option. The adjustable louvre awning provides shade and rain protection when closed and provides ventilation, light and sunshine when open.
The WeatherMaster adjustable louvre awning can adjust for shade or sunshine, for natural ventilation and protection against rain. A motorised option with a rain sensor is available.
The Slim-Tec uPVC windows system is affordable, durable and energy efficient. Slim-Tec is THE window for the affordable housing market, it is energy efficient, low maintenance, noise reducing, durable and tough, UV stable and increases ?security…
Rehau’s German engineered uPVC windows and doors offer the follow advantages: thermal insulation, security, optimum protection against dust, wind and rain, easy to clean, noise protection and uv stable….
Recycled rubber paving is extremely tough and resilient to damage and stains. EnviroBuild paving and flooring products have virtually zero water or chemical absorption, resulting in no oil absorption from leaking vehicles, accidental spills, etc. These factors make EnviroBuild products very easy to maintain. Simply hose or sweep off dirt and dust. For more aggressive dirt, simply clean with a cloth/mop dipped in a soapy water mixture or use a high-pressure cleaner. Damaged pavers can easily be lifted/extracted and replaced. A variety of other colours and speckled combinations can be made on request depending on the order volume.
Aerolite is a pink, high quality, Glasswool thermal and acoustic ceiling insulation that is bonded with an inert, thermosetting resin. The strong, resilient, flexible blankets are supplied in compression packed rolls and are easy to cut and install.
Water Systems | Accessories, Grab Rails & Taps Product Guide Every washroom has the potential to be wonderful and inviting Thanks to the innovative and intelligent washroom and sanitary solutions, Franke Water Systems is numbered among the leading suppliers worldwide for public, semi-public and commercial use. Here, Franke particularly concentrates on the development of complete sanitary systems, which are designed for durability, excellent quality, functionality and appearance.
The YORK® YZ Chiller, built upon decades of industry-leading expertise, challenges everything about conventional water-cooled chiller design. Our chiller engineers analyzed every function, challenged every assumption and questioned every component. Resulting in the industry’s first centrifugal chiller fully optimized for ultimate performance with a next-generation low-GWP (global warming potential) refrigerant, delivering superior real-world performance, lower cost of ownership and a new definition of sustainability. It’s the first chiller built to exceed every expectation – today and tomorrow.
The Trellidor Aluminium Retractable Security gate is elegant and uncluttered with no visible rivets. It is ideal for environments such as coastal areas as it is made from structural steel to avoid the corrosion problems associated with these conditions and to provide additional strength. These gates are top hung and engineered to open and close smoothly. They are fully framed to enhance their strength.
Charge an entrance fee for your public restroom, swimming pool, club or facility. • Pay for entry system • Coin acceptor which accepts multiple types of coins once programmed • Programmable to any currency • Can be set to any amount • In-built counter for auditing purposes with reset function • Lockable coin hopper • Can be fitted to any type of turnstile or gooseneck • Not for outdoor installations and cannot give change or a receipt
Twinstar Precast will manufacture any Precast Concrete Product to your design and need. We specialise in the manufacture of precast concrete products which are not already available on the market, even once-off items…
BuddyBats are pipe anchors. Their function is to reduce water hammer caused by vibrations in pipes. Buddy Bats are available in 5 different colours: Black, Brown, White, Red & Blue. They can assist with pipe identification – Red for hot water pipes and Blue for cold water pipes. White BuddyBats can be painted if used on external walls. Brown is traditionally used for copper or brown polycop pipes. Brown & Black are the most UV stabilised of all the colours and can be used for external pipe-work, although it is recommended that Nylon BuddyBats are rather used for this application.
BuddyBats are pipe anchors. Their function is to reduce water hammer caused by vibrations in pipes. Buddy Bats are available in 5 different colours: Black, Brown, White, Red & Blue. They can assist with pipe identification – Red for hot water pipes and Blue for cold water pipes. White BuddyBats can be painted if used on external walls. Brown is traditionally used for copper or brown polycop pipes, or to attach to roof trusses. Brown & Black are the most UV stabilised of all the colours and can be used for external pipe-work, although it is recommended that Nylon BuddyBats are rather used for this application.
A gloss granular stone design. The following colours are available: Tugela Blanc, Tugela Yorkstone, Tugela Ash and Tugela Lava.
The HyDrain 1st Fix consists of a F-box that acts as a reducer that is available in 4 different outlets for easy pipe connections as well as a dust cover for protection during construction. This product together with the HyDrain 2nd Fix acts as a full-bore and is a suitable replacement to the common cast iron full-bore that has traditionally been installed on flat concrete roofs to drain rainwater.
The HyDrain 2nd Fix comprises of the following components: A Waterproofing Flange, manufactured from Glass-filled Nylon, which is compatible with most conventional methods and applications of waterproofing. A Domed Grate which is made from Polypropylene with added UV stabilisers to increase longevity in outdoor applications/installations and is specifically designed with two tiers to attempt to prevent blockage by debris and is the last step to achieving a High-Quality Full-Bore. It is supplied with 4x Nuts & Bolts for the fastening down of the Dome Grate and 4 x Finishing Plugs.
The HyDrain is an ideal cost-effective replacement for the traditional cast iron Full-Bore type and is specifically designed for use as a Full-Bore drain where needed and is supplied in an easy to use pack with comprehensive installation instructions for the installer/end users convenience. The HyDrain Complete comprises of the following components: The F-Box with a Retaining Ring (made from Hostaform) & Rubber Seal, forms the main body of the drain which houses components that produces a unique end-product and are available in both horizontal and vertical discharge points with two outlet sizes (50mm and 75mm). The F-Box is made from ABS (Acrylonitrile Butadiene Styrene) plastic for its durability and impact resistant properties. A Round Red Dust Cover which is made from HD-PE, is supplied for the protection of the F-Box during the construction phase. An M-sert Waterproofing Flange, manufactured from Glass-filled Nylon, which is compatible with most conventional methods and applications of waterproofing. A Domed Grate which is made from Polypropylene with added UV stabilisers to increase longevity in outdoor applications/installations and is specifically designed with two tiers to attempt to prevent blockage by debris and is the final step to achieving a High-Quality Full-Bore. It is supplied with 4x Nuts & Bolts for the fastening down of the Dome Grate and 4 x Finishing Plugs. 2.4.3 Key Benefits: 220.127.116.11 Easy to install and maintain ensuring a quality finish. 18.104.22.168 Manufactured from Green sustainable & recyclable materials 22.214.171.124 Domed Grate will not rust over time (Sea Quality, perfect for both coastal and inland installations!) 126.96.36.199 The F-Box with Ring & Seal ensures a watertight finish. 188.8.131.52 The Round Red Dust Cover protects the F-Box unit by preventing foreign objects from obstructing it during construction. 184.108.40.206 The M-sert Waterproofing Flange is height adjustable to obtain an optimal flush finish with the desired finish (tiles/screed etc). 220.127.116.11 Waterproofing Flange can be trimmed to fit awkward spaces. 2.4.4 Applications: ? Installation to concrete flat roofs and balconies for the effective drainage of rain/storm/surface water ? The pipeline can be connected to a rainwater harvesting system. ? Can be used inside roof-top planter boxes and or roof gardens.
A speckled grey stone appearance on a structured relief surface. Available in the following colours: Etna Desert, Etna Ash and Etna Limestone.
Underlay – Instalay & Eco-lay self-adhesive environmentally friendly rubber crumb underlays are antimicrobial anti-fatigue and thermal.
The HiddenHatch is a universal inspection hatch/duct which can be tiled to blend into its surrounds without being noticed while allowing access for future maintenance. The HiddenHatch consists of a frame with a nylon blue cord to open it in the future and a removable cover plate. Key Benefits: a. Easy to install with a quality finish using a selected tile/mosaic or other finishing product. b. Will fit either 1 x 300 x 300mm wall tile or 2 x 150 x 150mm wall tiles or 4 x 100 x 100mm wall tiles. c. Saves cost and time of replacing existing and or trying to match dated tiles. d. It can be attached to brickwork, plaster and wooden surfaces. e. Manufactured from durable ABS plastic. f. 1-year warranty against manufacturer defects. g. It has a variety of applications such as accessing plumbing or electrical pipe-work and /or accessing any other ‘hidden’ services.
The VitylDrain 2nd Fix Pack is installed during the “finishing” phase of construction. It comprises a large waterproofing flange, a vityl screw down insert & an ABS plastic grate. This product needs to be specified together with a VitylDrain 1st fix in order to make up a complete drainage unit. This is only the top half of a floor drain. The Vinyl flooring adheres directly onto the waterproofing flange to create a permanent water seal. VitylDrain 2nd Fix is only compatible with VitylDrain 1st fix and must not be used with any other Seaqual 1st fix pack.
VitylDrain 1st Fix Packs are the 1st half of a floor drain specifically designed where vinyl flooring has been specified. The 1st Fix comprises a housing device called an F-box that connects to a standard plumbing pipe of either 50mm or 75mm. It is available with both horizontal and vertical outlets.
The catchpit that blends into the surrounding paving. The RainDrain Lite consists of a body, which acts as a sump, with a Polypropylene grate and a high-density foam seal. RainDrain Lite is not recommended for areas with vehicular traffic. This is for pedestrian foot traffic only.
A complete 40mm side outlet wet floor drain with 75mm water trap & white ABS plastic grate. For use in showers, kitchens, laundries & any other wet floor area that does not require waterproofing.
A complete 40mm side outlet wet floor square shaped hole configuration.For use in showers, kitchens, laundries & any other wet floor area which does not require a waterproofing membrane.
A complete 40mm side outlet wet floor drain with 75mm water trap & 316-grade stainless steel grate with round shaped hole configuration.For use in showers, kitchens, laundries & any other wet floor area which does not require waterproofing.
At VAGA ( Van Acht Glass and Aluminium) we strive to maintain the same quality and service with which we have been associated with over the last 30years. Advantages of ALUMINIUM – Strong material – Larger sizes available – Longevity and low maintenance – Strong market awareness – Availability – Versatile – Wide price range
Sudpave™ plastic grid pavers are used to control the run-off of rain water to limit the impact on over loaded storm water infrastructure. Sudpave™ is an open cell structure, which is either gravel filled, for frequent intensive use, or grass planted for occasional consecutive use. The open structure allows rain water to permeate into the ground at its source. Sudpave™ is now manufactured in South Africa to meet the increasing demand for paving products that satisfy the requirements of a Sustainable Urban Drainage System (SUDS).
Seaqual products can be divided into 4 categories: floor drains, long term cost saving products, pipe anchors and channel drainage systems. The range includes WetFloor Drain, TileGrate, LoLo Drain, Grate & Waste, DrainMate, HyDrain, BalconyDrain, RainDrain, VitylDrain, CeilingSaver, HiddenHatch, BuddyBats, BuddyClips, 4All…
The catchpit that blends into the surrounding paving. This product is tough enough to drive over with a domestic vehicle. Carrying capacity of up to 5 tons. The RainDrain Nylon consists of a body, which acts as a sump, with a nylon grate and a high-density foam seal. This is Seaqual’s flagship product.
A complete floor drain for all indoor applications. Includes a 50mm horizontal pipe connection, a 75mm deep water trap which is SANS compliant, a large water-proofing flange and a square hole satin finish 304 grade stainless steel grate. This drain can be installed in all indoor wet floor applications such as showers, wet rooms, laundries, kitchens etc.
The 2nd part of the Seaqual WetFloor Drain. The WetFloor 2nd Fix Pack is installed during the “finishing” phase of construction. It comprises an M-sert which houses the grate, a 75mm SANS 0252-2 compliant water trap and a grate. The Dust Cover protects the 2nd Fix from blockages & damages during construction. There are 17 grates to choose from. This product needs to be specified together with a WetFloor 1st fix in order to make up a complete drainage unit.
Ceiling Savers are unique little devices that are installed over the vacuum breaker of the geyser. Vacuum breakers can fail and if they do there is no provision to lead water outside the home. In the event of vacuum breaker failure the Ceiling Saver directs the flow of water safely through the overflow pipe and discharges the water outside the home, thereby preventing flood damage within.
Catering & Industrial products: sinks, tables, wall benches & shelving. Heavy duty industrial sinks and tables with sound deadening underframes. The range is complemented by a selection of modular designed shelving systems for catering applications.
Quick to install and easy to use the BuddyClip expertly anchors electrical conduit to any surface type such as brickwork, plaster, wood, rhino board etc. BuddyClip’s are available in two sizes: 20mm & 25mm to suit standard conduit sizes.
Sikafloor® Garage is a two part, water dispersed, coloured, epoxy resin based coating. that can be used for concrete, cement screeds, broadcast systems and epoxy mortars. It can be subjected to normal up to medium heavy mechanical and chemical loading and is used for production areas, warehouses, car park decks, garages, etc.
Sikaflex® AT-Façade is a 1-part, moisture curing elastic sealant based on Silane Terminated Polymers. Especially for movement and connection joints on porous and non-porous substrates. Excellent weatherability and highest UV resistance.
The BalconyDrain Complete comprises of the following components: A F-Box which forms the main body of the drain which houses components that produce a unique end product and are available in both Horizontal and Vertical discharge points with two outlet sizes (50mm and 75mm), is made from ABS (Acrylonitrile Butadiene Styrene) plastic for durability and its impact resistant properties. A special Waterproofing Flange which is also made from ABS plastic is compatible with most conventional waterproofing methods.
Franke is a leading supplier of sanitaryware products to hospitals, clinics and mortuaries – environments where hygiene is of the highest priority. Franke is certified to ISO9001: 2008 quality management standards. Our designs and construction ensure that our products meet the demands of safety, hygiene and quality. Products include Slop Hoppers, Drip Sinks, Bottle Racks, Bed Pan Wash-Ups, Surgeon Scrub Up Units, Plaster Of Paris Sinks and Baths. Franke is also a leading supplier of a large range of high-grade stainless steel equipment to mortuaries and post-mortem rooms including Autopsy Tables, Trolleys, Body Racks, Trays, Instrument Cabinets, Writing Desks, Shelving and Ventilated Mortuary Equipment.
A complete 50mm side outlet wet floor drain with non-integrated 51mm water trap & 316 grade stainless steel grate with square shaped hole configuration for use in showers, kitchens, laundries & any other wet floor area.
Flow capacity of BalconyDrain, HyDrain & WetFloor Drain: the flow rate is determined by the diameter of the pipe outlet.
GypWall DuraLine is a high impact-resistant drywall system for use where a more durable structure is required. It provides a lightweight, cost-effective, non-loadbearing drywall suitable for all types of commercial, healthcare and educational buildings. GypWall DuraLine wall systems made of DuraLine plasterboard (yellow paper lining) have been designed and developed with a higher density core to give greater impact resistance in heavy use areas.
A drainage device consisting of a grate housing M-sert with spigot, grate and dust cover able to connect to either 40mm or 50mm plumbing pipe. Use with either a standard 40mm P-Trap for internal floor drains or with a 90° bend on balconies.
How to reduce the length of a 4all channel and grate.
The stand alone rain sensor automatically detects rain or snow fall and signals the ventilation control system to close open vents.
The Twin SECO N 24 25 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications. SE Controls manufacture this high-quality ‘Made in Britain’ actuator with the following features: ‘Frequency of operation’ data logging records every actuator movement, Compact design with variable options for stroke length, Extensive range of brackets to suit a variety of window systems, Quiet operation with configurable speed control…
The Twin SECO Ni 24 40 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Smoke and Environmental Ventilation applications. Product Details SE Controls manufacture this high-quality ‘Made in Britain’ actuator with the following features: Tested to all annexes of EN12101-2: 2003 ‘Frequency of operation’ data logging records every actuator movement Compact design with variable options for stroke length Standard finish is Grey RAL 9006, can be customised to suit requirements Standard flex length is 2m but this can be modified to suit installation requirements Extensive range of brackets to suit a variety of window systems Quiet operation with configurable speed control 900mm version is not suitable for Top Hung applications
The design of the actuator is double insulated with dual stroke adjustment. Powered by either a 230Vac or 24Vdc power supply, it is suitable for use at home and other small installation.
The SECO Ni 40 is a certified and compliant Chain Actuator designed to provide precise and reliable operation for Environmental Ventilation applications. Product Details SE Controls manufacture this high-quality ‘Made in Britain’ actuator with the following features: • ‘Frequency of operation’ data logging records every actuator movement • Compact design with variable options for stroke length • Standard finish is Grey RAL 9006, can be customised to suit requirements • Standard flex length is 2m but this can be modified to suit installation requirements • Extensive range of brackets to suit a variety of window systems • Quiet operation with configurable speed control
For the natural smoke and heat exhaust it is physically indispensable that a sufficient supply air opening is available. This has to be the 1,5 fold of the air discharge opening according to building code. In practice there is an increased use of automatic electrical operated doors beside windows and flaps. The Folding Arm² Door Opener is the ideal actuator technology for smoke and heat exhaust supply air doors for keeping the door for the daily use manually flexible.
The product uses main AC power supply and provides a 24VDC output. It is a perfect combination of regular switch and RF receiver which makes it ideal for building automation and smart home appliances.
Coloured fibre-reinforced plaster. Provides a tough, mottled, coloured exterior or interior plaster onto conventional wood floated or scratch plaster that is UV resistant. A premium blend of OPC, quality graded aggregates, high-performance additives and fibres designed as a decorative coloured, and weatherproof skim plaster to be applied between 3mm and 5mm thick. CemPlaster is suitable as an interior or exterior application.
FRANKE WC PANS ARE DESIGNED TO REDUCE WATER CONSUMPTION BY UP TO 60% WC Pans consume up to 90 percent of water usage in commercial buildings. New technology has been introduced to produce a new range that delivers high performance and aesthetically pleasing designs, to compliment the rest of the Franke sanitary ware products. Designed for ultimate hygiene solutions and ease of installation in public ablutions, the range caters for a wide variety of applications, from recreational facilities, shopping centres, petrol stations, airports and stadiums. Product features: • Hygienic, quality designs and excellent low water consumption • Aesthetically pleasing design, with satin finish • Pressed bowl and P-trap, with minimal welding through robotic welding technology • Full flush of 6 litres • Sturdy design and safety compliant with low maintenance compared with ceramic and composite materials
SECO Ni 24 40 Chain Actuator for Smoke & Environmental Ventilation Applications SE Controls manufacture this high-quality ‘Made in Britain’ actuator with the following features: • Tested to all annexes of EN12101-2: 2003 • ‘Frequency of operation’ data logging records every actuator movement • Compact design with variable options for stroke length • Standard finish is Grey RAL 9006, can be customised to suit requirements • Standard flex length is 2m but this can be modified to suit installation requirements • Extensive range of brackets to suit a variety of window systems • Quiet operation with configurable speed control • 900mm version is not suitable for Top Hung applications
Geberit completes its bathroom collection with the three premium bathtub models Acanto, Supero and Rekord. The bathtubs are made of solid-coloured acrylic and they come in different sizes to match any bathroom layout.
Water is indispensable for daily personal hygiene. It cleans, freshens and lends a unique experience of well-being. That is why more and more people are becoming enthusiastic about natural and beneficial WC hygiene with water. After all, those who feel fresh and clean the whole day radiate assurance and attractiveness – and thus self-confidence. Geberit AquaClean offers you this well-being at the touch of a button: beneficial and thorough. Let yourself be convinced by the completely new feeling of freshness in our shower toilets and enjoy the extra helping of self-confidence it brings with it the whole day through, everywhere and in every situation.
Vitesse Top hung sliding door system for timber doors up to a weight of 40kgs. For two Panels SPECIFICATIONS: Max door mass: 40kg Max opening width = 3000mm Recommended height = 2400mm Door thickness: 16-21mm
Strap 100N Installation Instructions, timber frame door, barn door style fittings for interior doors
Lifts & Elevators: Future Trend T710, Modern Life L320, Classic Athena A710, Classic Athena A310
Atlas Gigas is the traction solution for rated loads from 1050Kg to 2500Kg adjusted to your needs. It is equipped with KLEEMANN premium quality gearless motor and inverter of leading edge technology which enable exceptional ride quality, isolation of noises and very low energy consumption. Shape the product that best fits your needs through many design options and finishings.
Includes ninja spikes, multi purpose brackets, Ultra-Span, Tibond, wall ties, shade cloth fasteners, gryptite connector plates, purlin clips, hurricane clips, truss hangers, pole hangers & gumbo brackets, cleats, purlin, speed brace, batten, bracing strip…
The light gauge steel wall framing system is flexible and cost effective. Offering the highest quality load bearing and non load bearing light gauge steel products. Mitek is a fully integrated designer and manufacturer of framing solutions addressing both the commercial and residential markets.
eCo Fasteners are timber and steel fastening devices that provide strong and rigid connections to any building structure in which they are applied. The use of the appropriate fastener in the correct manner not only ensures strong connections, but also the structural integrity of the building.
Prefabricated timber roof trusses. We also offer full size prototype truss testing as an alternative truss design method.
Whether you are looking to freshen up a lawn, save water, or if you are creating a whole new garden, investing in Easigrass™ is a great way to transform your outdoor space. Easigrass™ is becoming ever popular due to its low maintenance, realistic look and dream garden appeal. Easigrass™ Is safe, clean and hygienic for all your pets too. There’s no mud or mess, no cutting or weeding and it creates beautiful outdoor spaces for family and friends to enjoy.
eCo Truss Hangers provide a secure means of support to connect timber beams, joists or trusses. eCo Truss Hangers are available in widths of 38mm, 50mm and 76mm. Various configurations of truss hangers are available, thus offering a range of load values whilst keeping economy in mind.
The scope of Mitek’s services includes not only unrivaled expertise in terms of professional structural engineering service but also the extensive research and development into all aspects of timber and light gauge steel roof design and construction as well as a full range of manufacturing equipment…
The low mass per m2 (between 2-10kg) of this roofing system ensures both savings on the supporting structure as well as on transportation and erection costs whilst also being vermin proof and non-combustible. Large sections of the roof can simply be pre-assembled on the ground and hoisted into position on the walls – making this one of the most viable systems with a large range of applications up to a clear span of 40m.
MiTek Top-Hat profiles are steel hat channel profiles, manufactured from galvanised steel for superior corrosion resistance. These cost effective steel battens & purlins are compatible with timber and steel trusses for either tile or metal sheeting applications