Building Product Brochures & Datasheets

Tile Adhesives

Talfix

TALFIX is a grey quick-setting high-strength cement based adhesive ideally suited for, but not restricted to, smaller DIY installations and tile replacements. Suitable for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors.

Stix

TAL STIX is a grey general-purpose cement based powder adhesive for fixing ceramic wall and floor tiles in interior and exterior installations, and was developed for the DIY market. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing

Porcelainfix

TAL PORCELAINFIX is a grey quick-setting high-strength shrinkage-compensated cement based adhesive for fixing porcelain tiles. It can also be used to fix other types of tiles. The adhesive was designed for easy use, allowing a 4 hour pot life.

TAL Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

TAL | Flex

TAL FLEX is a thin-bed polymer-based paste adhesive for fixing lightweight tiles to flexible surfaces, such as partition walling. TAL FLEX has immediate tile-grip characteristics, thus minimising the possibility of tile slump. As TAL FLEX gives immediate grip, it is ideal for fixing lightweight tiles in upside-down tiling situations such as window and doorway arches. TAL FLEX should not be used in extreme wet conditions, or on floors.

TAL | Goldflex Ultra

TAL GOLDFLEX ULTRA is a high strength, ultra flexible rapid setting grey cement based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for elevated flexibility and water resistance while maintaining ultra-tensile strength, usually only achieved by the addition of latex admixtures. The incorporation of dry-form polymers replaces the need for a latex bonding additive. Only clean water needs to be added, reducing mixing errors on site. It is suitable for using in all interior and exterior wall and floor applications and finds special use in fixing of glass tiles.


Copyright © 2021 New Media, a division of Media24. All rights reserved.