Building Product Brochures & Datasheets

Boards, Glass and Sheets

Stone Flex

Stone flex is a flexible alternative to solid natural stone. Stone flex has a 100% natural stone surface and is laminated with a high strength polymer backing.

Van Acht Catalogue

Van Acht catalogue of doors and windows, Van Acht manufactures virtually any custom-made wooden product as well as expand our range of products available; V-COAT, Van Acht Glass and Aluminium, uPVC Windows and Doors, YOSO Wood and Aluminium Doors, Marine Ply Garage Doors and our Frameless Folding Doors are products that were developed over the last 6 years and have finally joined the Van Acht family of products.

Glass & Aluminium Windows & Doors

At VAGA (Van Acht Glass and Aluminium), our commitment to maintaining the high standards of quality and service established over the past three decades remains unwavering. Aluminium, as a material, offers numerous advantages that align with our ethos of excellence. Its inherent strength, ability to accommodate larger sizes, and durability with minimal maintenance requirements make it a preferred choice.

Saint-Gobain Gyproc Walls - Gypwall Classic

Gypwall Classic Is the industry’s original lightweight, non load bearing drywall system providing cost effective, multipurpose solutions for all types of buildings.

Saint Gobain Gyproc Wall Insulation - Framework Drylining

Lightweight independent wall lining system which consists of Gyproc RhinoBoard 12.5mm or Gyproc RhinoBoard 15mm internal lining fixed to Donn UltraSTEEL framework 51mm/63.5mm/102mm. Install Isover Cavitybatt within cavity.

GypWall DryLining

For use in offices, internal residential walling, hotels, hospitals and schools applied on new or existing masonry work. Gyproc Drylining is a basic drylining system primarily for the housing market and refurbishment sector. A plasterboard system that replaces a wet sand cement plaster with a dry lining that is smooth, level and contributes to providing a cavity for insulation to masonry walls.

Simbithi Eco-Estate - Ballito, KZN

This contemporary residence in the heart of KwaZulu-Natal’s northern coastline made extensive use of Saint-Gobain Gyproc products to add to the modern visual appeal. Gyproc RhinoLite Projection Plaster was used to deliver a high quality finish efficiently and timeously.

Cradlestone Mall - Muldersdrift

Winner of the Saint-Gobain Gyproc National Trophy, which awards craftsmanship, this new shopping mall in Muldersdrift is an architectural delight and a construction masterpiece.

Paarman Factory Case Study

Paarmans Food Factory, Cape Town – A suspended mezzanine floor using a light steel frame structure and Gyproc Performance Plasterboards for walls provided a quiet office area without sacrificing accessibility. The project won an SA Engineering Award.

Kalahari Mall - Upington

A bold interplay of steel, wood and plasterboard forms the backbone of this shopping mall featuring over 70 stores. Gyproc performance plasterboards and ceiling boards provided the perfect finish.

HPC Indoor Cricket Centre - Pretoria

This centre is a unique combination of a state of the art specialised training facility with a supportive administrative component housing offices, a boardroom, lecture facilities and biomechanical facility.

Nicolway Shopping Centre - Bryanston

Winner of the Plaster Category of the 2014 Saint-Gobain Gyproc National Trophy, as well as the 2013 SAPOA Innovative Excellence Award, the Nicolway Shopping Centre combines natural light with stunning architecture and craftsmanship to create a unique shopping experience.

Factoryboard

Factoryboard is a rigid board manufactured from non-combustible Glasswool insulation. Available in 25, 40 or 50 mm thickness. It can be supplied with an ASTM E-84 tested reinforced foil or white metalised foil. Alternative facings are also available (white embossed vinyl or black non-woven glass tissue).

DANPALON® Glazing material

DANPALON® panels are often used in commercial and residential buildings for their aesthetic appeal and functional benefits. They are suitable for a wide range of architectural styles and can contribute to the overall sustainability and energy efficiency of a structure.

Waterjet Cutting Design Criteria

Virtually any type of design can be replicated with waterjet cutting. Being purpose-made, please consult Everite during the design stage of your project. Important considerations will be the pattern or design; how the finished product will be installed – framed, frameless and fixing points and quantity.

Building Plank

Nutec Building Plank (popularly known as Vermont) provides an out of the ordinary solution for external and internal cladding. Usually installed in a ship lapped pattern, it is available in a plain and textured finish that gives the realistic look and feel of timber.

Flat Sheets

Nutec Flat Sheets are an economical, multi-purpose building board that can be used in diverse exterior and interior applications, ranging from cladding, eaves linings and fascias to ceilings, partitioning, panelling and suspended flooring.

Expanded Polystyrene

Expanded Polystyrene EPS contains no CFC’s and is considered ozone friendly by the Wildlife Society of South Africa.

Factoryboard

Factoryboard will reduce thermal heat transmission and as a result will reduce energy consumption significantly. Insulating metal buildings is essential and helps stabilise the structures interior temperature

Hydroboard

Hydroboard is a moulded insulation board for applications where resistance to moisture and compression is required.

PIR Cored Panels

Isowall’s PIR cored panels are made from a flexible faced PIR board made on a continuous laminator.  Even though PIR is not non-combustible, it does not burn in the same way as other foams such as polystyrene

EPS Cups

Hebcooler Cups are manufactured from EPS, and come in a range of volumes and sizes. Quick facts: • 100% recyclable • No CFC’s • Thermo-insulating: keeps contents at desired temperature for longer “no need for double cupping”

Hebcooler Cups and Tubs

Hebcooler EPS Cups and Tubs are made out of EPS, and come in a range of volumes and sizes. We offer you custom printed cups in high-resolution full colour print. Paper wrapped cups are ideal for promotions or for specific branding of company logos.

Tongue and Groove

Nutec Tongue and Groove Textured and Plain boards are medium density. These sheets are supplied in the natural grey and can be varnished with wood stain to simulate timber. Textured sheets can also be painted in various techniques to achieve a pleasant aesthetic finish. These boards are ideal for ceilings, internal and external wall panelling, door panelling and garden sheds. Tongue and Groove Plain boards provide a classic smooth Tongue and Groove finish.

Sandwich Panels

Isowall sandwich panels is a versatile, economical, aesthetic and weatherproof composite insulating system suitable for external wall and roof structures, or where precise controlled temperature conditions are required, for example in cold rooms and freezer stores.

Isolite

Isolite (EPS) is a material which is used extensively in the building and construction industry as insulation and has many attributes, not least of which is its proven safety record during all stages of its life cycle – from production, during use, through to re-use or recycling. It is not surprising that health and safety take top priority in the building and construction industry and the one material that performs well is EPS, whose physical properties make it ideal for the specification.

COBAgrip Light

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip-resistance both indoors and out.

COBAgrip Sheet

COBAGRiP Sheet Ideal solution to combat slip hazards such as spilt liquids or ice

Isolite Insulation

Isolite (EPS) is a material which is used extensively in the building and construction industry as insulation and has many attributes, not least of which is its proven safety record during all stages of its life cycle – from production, during use, through to re-use or recycling. It is not surprising that health and safety take top priority in the building and construction industry and the one material that performs well is EPS, whose physical properties make it ideal for specifi cation.

Natural Stone Slab Collection

Natural Stone Slab Collection – semi-precious stone, marble, onyx, granite, venice stone, glass and sandstone, limestone, quartzite, slate,

AUTOMOTIVE GLASS BONDING SYSTEMS

AUTOMOTIVE GLASS BONDING SYSTEMS

Isocornice Decorative Cornice Range

Isocornice is an Isolite product – Isolite is the leading expanded polystyrene (EPS) manufacturer in Africa. Under the Isolite brand, Isocornice manufactures an EPS range: Isocornice Decorative Cornice

Saint-Gobain Gyproc GlasRoc H

GlasRoc H is a moisture resistant tile backing & wet area board. This plasterboard is manufactured in accordance to EN standard EN 15283-1 Gypsum boards with fibrous reinforcement.

Gyproc Projects | Cell C Head Office - Buccleuch, Johannesburg

Gyproc Products used in projects The new landmark Cell C building in Northern Johannesburg made extensive use of Saint-Gobain Gyproc products, with Weber Etics providing superior exterior rendering. Gyproc products, combined with high-quality design resulted in a multi-purpose, multi comfort business space.

Hebcooler Customise your Cups -Sleeve Template

Hebcooler – customising your cups template.

Hebcooler Customise your Cups Artwork

Hebcooler – Customising your cups.

Expanded Polystyrene Core Panel

Polystyrene is the most common core material used in Isowall panels. It has a high strength to weight ratio and good water absorption resistance.

Brochures & Datasheets



Copyright © 2024 New Media, a division of Media24. All rights reserved.