Building Product Brochures & Datasheets

TAL

Talcem Premix Method Statement

TAL – Talcem Premix method statement, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Talcem Premix Data Sheet

Talcem Premix is a special blend of a rapid-setting high-strength shrinkage-compensated cement and coarse, well graded quartz aggregate which is mixed with clean water, for the preparation of rapid-setting shrinkage-compensated Screeds and Toppings for interior and exterior applications.

Talcem Method Statement

TAL- Talcem general purpose method statement ,installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Talcem Data Sheet

Talcem is a specially formulated rapid-setting Grey Cement specifically designed for installations where curing times of conventional (OPC) materials cannot be adhered to.  Talcem should be mixed with a well-balanced envelope of fine, medium and coarse Aggregate (size of coarse Aggregate to be no greater than 6mm) and clean (potable) water, for the preparation of rapid-setting shrinkage-compensated Screeds, Toppings and Renders for interior and exterior applications.

Superscreed SL Method Statement

TAL – Superscreed SL general purpose method statement, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Superscreed SL

TAL Superscreed SL is a grey single-component high-performance self-levelling and smoothing Underlayment Compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates, designed with high flow properties when added to water to produce a smooth and durable floor surface prior to the fixing of floor coverings with minimum installation time.

Superscreed Method Statement

TAL Superscreed general purpose method statement installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Screedmaster

TAL screedmaster general purpose method statement and  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Screedmaster Industrial

TAL – Screedmaster Industrial general purpose method statement and  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Talcem Screeds and Toppings

TAL- Talcem screed and toppings  general purpose method statement installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Treat AcidWash

TAL – X-Treat AcidWash, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Treat AcidWash

TAL- X-Treat AcidWash is an acidic solution specifically developed to remove cement and concrete from most surfaces and to etch concrete prior to receiving finishes.

X-Shield VaporStop HB Method Statement

TAL- X-Shield VaporStop HB  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Shield VaporStop HB

TAL – X-Shield VaporStop HB is a moisture tolerant, two component solvent free epoxy primer. On curing it produce a high cross link density barrier coat that prevents the debonding of coatings and floor toppings due to high moisture vapor emission rates (MVER).

X-Shield SF Primer, General Use

X-Shield SF Primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Shield SF Primer High performance primer for epoxy coating and floor systems

X-Shield SF Primer is a high penetration primer suitable for use with a wide range of epoxy coatings and floor systems.

X-Prime MT100 High Performance moisture tolerant primer and sealer for coating and floor systems

X-Prime MT100 is a high penetration primer suitable for use with a wide range of epoxy coatings and floor systems on substrates that have a high moisture content.  It can also be used as a stand alone sealer for green concrete.

Screedbinder General Purpose Method Statement as a Primer

TAL – Screedbinder applied as a primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Primer Aggregate General Purpose

Primer Aggregate  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Primer Aggregate Graded Silica Sand for Mechanical Keying and Slip Resistance

TAL Primer Aggregate is high-quality well-graded silica sand.  It provides a mechanical key for resin flooring systems as well as cementitious screeds/toppings/underlayments. TAL Primer Aggregate is also used in conjunction with TAL resin flooring and coating systems to provide a slip resistant finish. Available in Fine (SQ1), Medium (SQ2) and Coarse (SQ3).

Floor Primer General Purpose Method Statement

Floor Primer General Purpose Method Statement installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Floor Primer Modified Latex Primer for Porous Surfaces

TAL Floor Primer is a modified latex liquid primer designed for use on porous surfaces, ensuring a good bond onto the substrate. TAL Floor Primer is compatible with TAL Superscreed, TAL Screedmaster and TAL Superscreed SL Underlayment Compounds. It is also used as a primer prior to the application of TAL Superflex and TAL Sureproof Waterproofing Compounds. TAL Floor Primer can also be used as a primer onto very porous substrates, such as brickwork, prior to tiling.

Floorkey General Purpose Method Statement, Applied as a Mortar Additive

Floorkey general purpose method statement applied as a Mortar additive  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Floorkey General Purpose Method Statement

TAL – X-Tech EpoxySeal FLR100, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Floorkey Modified Latex Liquid Primer for Smooth, Dense & Impervious Surfaces

TAL Floorkey is a modified latex liquid primer designed for use as a slurry priming coat on smooth, dense and impervious surfaces, ensuring a good bond onto the substrate. TAL Floorkey is compatible with TAL Superscreed, TAL Screedmaster and TAL Superscreed SL Underlayment Compounds. It is also used as a primer prior to the application of TAL Superflex and TAL Sureproof Waterproofing Compounds.

Bitumen Primer 2K Polymer-Modified Primer for Surfaces Contaminated with Bitumen Fixative

TAL Bitumen Primer is a two-component (2K) polymer-modified primer for surfaces contaminated with old bitumen traditionally encountered in the fixing of vinyl tiles. Once cured, TAL Bitumen Primer offers a surface onto which most cement-based Under and Overlayments can be applied. It is also suitable for application over Contact Adhesive residues.

Bitumen Primer General Purpose Method Statement

Bitumen Primer general purpose method statement installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Fixing Instructions for X-Stop PVC Waterstops

TAL X-Stop PVC WAterstops  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only

X-Stop PVC Waterstops

X-Stop PVC Waterstops are manufactured from a high quality virgin PVC compound which has been formulated to give excellent flexibility and durability. They are extruded in a range of profiles

X-Stop HWS Waterstops Application Instructions

TAL X-Stop HWS Waterstops application instructions. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Stop HWS Waterstops

X-Stop HWS hydrophilic waterstops are swellable waterstops developed for use in construction joints. X-Stop HWS are hydrophilic composites developed to perform in saline, potable and ground water conditions.

X-Pruf SBE

X-Pruf SBE is a solvent free bitumen emulsion containing wetting and thixotropic agents.  It is supplied in two grades: • Standard: For use on horizontal surfaces and slopes up to 45o (ASTM D1227, Type III, Class 1) • Fiber Reinforced: For use on vertical surfaces and on slopes above 45o (ASTM D1227, Type II, Class 1)

X-Pruf CrystalCoat

X-Pruf CrystalCoat is a one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure.

Sureproof Method Statement

TAL Sureproof installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only

Sureproof Membrane Data Sheet

TAL Sureproof Membrane has been specifically designed and developed for all weather conditions and is used as a reinforcing membrane with TAL Sureproof waterproofing compound. The glass mesh in TAL Sureproof Membrane provides exceptional dimensional stability to the membrane, improving the tensile strength in both longitudinal and lateral directions. This, in turn, reinforces the TAL Sureproof waterproofing compound. TAL Sureproof Membrane is not affected by ultra violet, does not rot or burn, is moisture, mild acid and mild alkali resistant.  TAL Sureproof Membrane must be used as reinforcement in all coving areas, internal corners and interfaces, over small static cracks in the substrate, around floor drains/wastes, and around roof penetrations.

Superflex Membrane

TAL Superflex Membrane is a stitch-bonded polyester open weave membrane designed and developed for all weather conditions and is used as a reinforcing membrane with TAL Superflex waterproofing compound. TAL Superflex Membrane has exceptional dimensional stability, improving the tensile strength of the TAL Superflex waterproofing compound application in both longitudinal and lateral directions. TAL Superflex Membrane is not affected by ultra violet, does not rot or burn, is moisture, mild acid and mild alkali resistant. TAL Superflex Membrane must be used as reinforcement in all areas where TAL Superflex is applied.

Superflex I Method Statement

TAL Superflex I, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only

Superflex Acrylic Emulsion Waterproofing Compound

TAL Superflex is a ready to use acrylic based liquid waterproofing system which may be applied by brush or paint roller.  TAL Superflex was specifically designed to be fully compatible with cement-based tile adhesives.  When reinforced with TAL Superflex Membrane, it cures to provide a flexible, waterproof membrane capable of accommodating normal structural movement in the background and is ideal for waterproofing shower recesses, internal wet areas, external balconies and terraces, planter boxes, roof slabs and parapet walls.  TAL Superflex possesses excellent flexibility and UV resistance which allows it to be left exposed to weather elements on non-trafficable roof slabs and parapet walls. In instances where TAL Superflex is to be left exposed (parapet walls), a third coat should be applied, once the previous coats are dry. It may also be painted over, using a high-quality exterior grade acrylic paint.

Profix Plus General Purpose Method Statement

TAL- Profix Plus general purpose method statement  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Profix Plus Water-Based Modified Acrylic Adhesive

TAL Profix Plus is a water-based modified high performance aggressive acrylic adhesive specially designed for the installation of vinyl and textile (carpet) floor coverings including floor coverings with exceptionally coarse backings eg. needle punch carpeting, coir carpeting, etc. TAL Profix Plus is formulated with specialised high strength polymers giving high tensile and shear strength as well as dimensional and ageing stability that exceeds the requirements for adhering any type of coarse uneven backed carpeting. It is ideal for the installation of floor coverings that have very high levels of memory. TAL Profix Plus is suitable for laying of needlepunch carpeting and tiles as well as stick-down carpeting and tiles. It is suitable for application onto concrete, tiles, wood, vinyl, and metal access flooring. TAL Profix Plus is not suitable for adhering carpeting that has been coated with a rubber or bitumen based wear-under layment.

Profix General Purpose Method Statement

TAL- Profix general purpose method statement  provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Profix Water Based Modified Acrylic Adhesive

TAL Profix is a water-based multi-purpose modified acrylic based emulsion adhesive suitable for the installation of vinyl and textile (carpet) floor coverings. TAL Profix is formulated with specialised high strength polymers giving high tensile and shear strength as well as dimensional and ageing stability that exceeds the requirements for adhering any type of coarse uneven backed carpeting. TAL Profix is suitable for installing vinyl and carpet flooring and tiles as well as stick-down carpeting and tiles. It is suitable for application onto concrete, slate, wood, vinyl and metal access flooring. TAL Profix is not suitable for adhering carpeting that has been coated with a rubber or bitumen based wear-under layment.

TAL Pro-Tac Technical Data Sheet

TAL PRO-TAC is a solvent free, modified acrylic based adhesive. It was specifically developed for use with LVTs (Luxury Vinyl Tiles), Carpets and Carpet Tiles where repositionability is important in the early stages of installation.

X-Tech UraFloor TF applied to concrete

Method Statement on how to apply TAL- X-Tech UraFloor TF to concrete.

X-Tech IntegraFloor Quartz Monolithic floor hardening compound

TAL X-Tech IntegraFloor Quartz is a premixed non rusting floor hardener used to form a onolithically hardened concrete floor. It produces an abrasion resistant and hard wearing surface and is applied by the “shake on” technique.

X-Tech IntegraFloor Emery, General Use

TAL – X-Tech IntegraFloor and Emery  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech UraFloor TF Heavy duty polyurethane screed and mortar

TAL – X-Tech UraFloor TF is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock.

X-Tech Urafloor HT, Self Leveling Grade, Applied to concrete

TAL – X-Tech UraFloor HT, Self Leveling Grade application to concrete installation Guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech UraFloor HT Heavy duty polyurethane screed and self leveling flooring

X-Tech UraFloor HT is a heavy duty solvent free polyurethane flooring system which is available as both in screed and self leveling forms.

X-Tech UraFloor CS applied to concrete for use in freezer room

TAL – X-Tech UraFloor CS applied to concrete installation Guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information given is a summary intended for guidance only.

X-Tech UraFloor CS Heavy duty polyurethane screed and mortar for cold stores

TAL – X-Tech UraFloor CS is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock and that been specifically developed for use in cold stores and freezer rooms.

X-Tech SuperFlow, General Use (For Interior Use Only)

TAL  x-tech superflow  general use and the method on how to apply it

X-Tech SuperFlow

X-Tech SuperFlow is a cement based self smoothing decorative screeding system which is supplied in a wide range of colours. It is shrinkage compensated and rapid setting. The system is designed to produce a hard wearing decorative floor surface suitable for residential and light commercial applications. It is suitable for interior applications only.

X-Tech StoneFlow, General Use

Method Statement on TAL-X-Tech StoneFlow, General Use.

X-Tech StoneFlow Industrial grade rapid set self smoothing decorative screed

X-Tech StoneFlow is a cement based self smoothing heavy duty decorative industrial screeding system. It is shrinkage compensated and rapid setting. It is especially designed for use in industrial environments, on both new construction and renovation projects. It is designed for applications exposed to heavy traffic and abrasion, such as factories, warehouses and production areas. It is also suitable for commercial and residential applications.

HTC Guide to Grinding - X-Tech StoneFlow

TAl guide to grinding X-tech StoneFlow.

X-Tech IntegraFloor Quartz, General Use

TAL -X-Tech IntegraFloor Quartz, application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech IntegraFloor Emery Emery based monolithic floor hardening compounding

TAL X-Tech IntegraFloor Emery is a premixed non rusting floor hardener used to form a monolithically hardened concrete floor. It produces an abrasion resistant and hard wearing surface and is applied by the shake on technique.

Fusion, General Use

TAL – Fusion, general use  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech EpoxySeal FLR100, General use

TAL – X-Tech EpoxySeal FLR100, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech EpoxySeal FLR100 Chemical resistant high build epoxy floor coating

TAL – X-Tech EpoxySeal FLR100 is a high performance, high build, solvent free epoxy floor coating that is also decorative and suitable for use in a wide range of applications. It can also be used as a wall coating.

X-Tech EpoxyFloor TF applied to concrete

Method Statement on how to apply TAL- X-Tech EpoxyFloor TF  to concrete.

X-Tech EpoxyFloor TF Abrasion and chemical resistant epoxy floor screed

X-Tech EpoxyFloor TF is a three component, trowel applied epoxy floor screed that produces an extremely dense, durable, abrasion and chemically resistant floor. A fast cure grade is available that can accept pedestrian traffic after 3h at 25C and vehicular traffic after 4h at 25C.

X-Tech EpoxyFloor SL3 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL3 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 3 to 4mm thick.

X-Tech EpoxyFloor SL1 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL1 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1 to 1.5mm thick.

X-Tech EpoxyFloor SL2 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL2 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1.5 to 3mm thick.

X-Tech EpoxyFloor SL1 applied on to X-Prime MT100

TAL -X-Tech EpoxyFloor SL1 applied on to X-Prime MT100 application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech EpoxyAqua 100 High performance wall and floor coating for concrete

X-Tech EpoxyAqua 100 is a high performance, breathable epoxy wall and floor coating that is also decorative and suitable for use in a wide range of applications.

X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls

TAL – X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls application  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information  is a summary intended for guidance only.

X-Tech DecoQuartz QB Durable and decorative epoxy floor system

X-Tech DecoQuartz QB is a combination of colored quartz aggregate and 100% solids liquid epoxy resin that when applied, forms a seamless, colorful, chemical resistant and long wearing floor.

X-Tech DecoQuartz QB applied to concrete

Method Statement on how to apply TAL- X-Tech DeocoQuartz QB to concrete

X-Tech DecoQuartz TF Abrasion and chemical resistant decorative epoxy floor screed

X-Tech DecoQuartz TF is a three component, trowel applied 3 to 6mm thick epoxy floor screed that produces a non slip, abrasion and chemically resistant floor that is decorative in appearance. It is supplied with a clear epoxy resin and a wide range of colored quartz aggregates. By combining the various colors many individual color combinations can be produced.  A high temperature resin is available in area subject to temperature up to 110C.

X-Tech DecoQuartz TF, applied to concrete

TAL X-Tech DecoQuartz TF  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech DecoQuartz QB applied to concrete

TAL – X-Tech DecoQuartz QB application to concrete installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech DeckCoat CP - General Use

TAL X-Tech DeckCoat CP installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech DeckCoat CP Polyurethane anti-skid car park coating system

X-Tech DeckCoat CP is multi layer high performance, flexible polyurethane anti-skid car park coating system comprising a primer, anti-skid coat and aliphatic polyurethane top coat.

X-Tech CrystalClear

TAL -X-Tech CrystalClear, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech CrystalClear Solvent free clear coating, sealer and binder

TAL X-Tech CrystalClear is a clear high performance, solvent free, epoxy coating/sealer and is also suitable for use as a binder and sealer for decorative floor systems.

X-Tech AntiStatic SLE applied to new concrete using X-Shield SF Primer or MT Primer

Method Statement on how to apply TAL X-Tech AntiStatic SLE to new concrete using X-Shield SF Primer or MT Primer.

X-Tech AntiStatic SLE Conductive epoxy flooring system

TAL – X-Tech AntiStatic SLE is a three layer system comprising an epoxy primer, a water dispersed epoxy base coat and a self smoothing epoxy top coat that produces a conductive or dissipative floor. The conductive grade (CG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. The dissipative grade (DG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

X-Tech AntiStatic SLB applied to new concrete using X-Shield WD Primer

Method Statement on how to apply TAL- X-Tech  AntiStatic SLB to new concrete using X-Shield WD Primer.

X-Tech AntiStatic SLB

X-Tech AntiStatic SLB is a three layer breathable system comprising a water dispersed primer, a water dispersed epoxy base coat and a water based self smoothing epoxy top coat that produces a conductive or dissipative floor. When used with X-Tech Conductive Base Coat the floor will have a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. When used with X-Tech Dissipative Base Coat the floor will have a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

X-Shield BugFill

X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.

X-Shield BugFill, General Use

TAL method statement on X-Shield BugFill, General Use and application

Fusion Concrete look and feel, hybrid technology flooring

Fusion is a four component, self smoothing hybrid technology floor topping that produces a concrete look finish.

X-Tite ResiLoc EX22, General Use

Anchoring should only be carried out by experienced workers who have received training from the manufacturer. Application by unskilled labor may result in unsafe installation.

X-Tite ResiLoc EX22 High Performance Epoxy Resin Anchor

X-Tite ResiLoc EX22 is a pure epoxy resin grout use for general purpose horizontal and vertical anchoring in rock, concrete, brick or solid masonry.

Fine Epoxy Mortar & Grout

TAL Fine Epoxy Mortar & Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin non-sagging adhesive ideal for bonding tiles to walls and floors, and can also be used for subsequent grouting. It has excellent non-sag, stain and chemical resistant properties and is easy to apply and clean up after application. TAL Fine Epoxy Mortar & Grout is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. It is also suitable for use with glass tiles/mosaics and resin-bonded tiles. TAL Fine Epoxy Mortar & Grout is available in White and Light Grey.

X-Roc UltraPatch, General Use

Concrete repair is a skilled trade and should only be carried out by experienced workers.  Application by unskilled labor may result in a poor quality work

X-Roc UltraPatch Low Shrinkage High Build Concrete Repair Mortar

X-Roc UltraPatch is a cementitious single component polymer modified concrete repair mortar for use in vertical and overhead applications

X-Roc StrongPatch, Used as a screed

The laying of screed is a skilled trade and should only be carried out by experienced workers.  Application by unskilled labor may result in for additional information before commencing work

X-Roc StrongPatch High Strength Shrinkage Compensated Polymer Modified Repair Mortar

X-Roc StrongPatch is a single component, fiber reinforced, shrinkage compensated, high strength concrete repair mortar manufactured from selected cements, aggregates and additives. It has exceptional resistance to carbonation, chloride ingress, sulphate attack and freeze thaw attack.

X-Roc SlabPatch Flowable Fast Setting Concrete Reinstatement Micro Concrete

X-Roc SlabPatch Flowable is a single component, fast setting, fluid micro concrete manufactured from selected cements, aggregates and additives and has extremely high durability.

X-Roc SlabPatch Flowable Method Statement

Application of X-Roc SlabPatch Flowable is a skilled operation and should only be carried out by experienced technicians with the correct training. Application by unskilled labor is not permitted.

X-Roc SlabPatch Method Statement

Application of X-Roc SlabPatch is a skilled operation and should only be carried out by experienced technicians with the correct training. Application by unskilled labor is not permitted.

X-Roc SlabPatch - Fast Setting Concrete Slab Reinstatement Micro Concrete

X-Roc SlabPatch is a single component, fast setting, fluid micro concrete manufactured from selected cements, aggregates and additives and has extremely high durability. It can be used at a range of work abilities

X-Roc SkimCoat, Method Statement

Concrete repair/finishing

X-Roc SkimCoat

X-Roc SkimCoat is a single component cementitious polymer modified concrete skim coat for use in horizontal, vertical and overhead applications.

X-Roc MicroCrete Shrinkage Compensated Fluid Micro Concrete

X-Roc MicroCrete is a single component, shrinkage compensated, fluid micro concrete manufactured from selected cements, aggregates and additives. It can be used at a wide range of work abilities. When used as a fluid micro concrete it is self-compacting. It has exceptional resistance to carbonation, chloride ingress, sulfate attack and freeze thaw attack.

X-Roc Galzinc

X-Roc GalZinc is a single component zinc rich epoxy primer. As an anti-corrosion primer for reinforcing steel to extend the life of repairs made to reinforced concrete.

Rapidfix Method Statement

TAL- Rapidfix general purpose method statement and installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Sealmaster Cord

TAL Sealmaster Cord is a flexible, readily compressible closed-cell polyethylene backing cord for use in conjunction with elastomeric joint sealants. TAL Sealmaster Cord is fully compatible with TAL Goldstar Sealmaster 1000 polyurethane joint sealant (and most other resilient joint sealants and caulking materials).

Goldstar Sealmaster 1000 General Purpose Method Statement

Application of TAL Goldstar Sealmaster 1000 Polyurethane Joint Sealant & Adhesive is a skilled operation and should only be carried out by experienced artisans with the correct training. Application by unskilled labour is not recommended.

TAL Invisiseal

TAL INVISISEAL is a specially formulated florosiloxane-based sealer which penetrates and bonds onto low-porosity natural stone tiles on walls and floors in interior and exterior installations, creating a hard-wearing and protective finish without causing discolouration. It dries clear and will repel water and most oils. It is suitable for use on low-porosity natural stone tiles, leaving no residue on the face of the tiles.

Wall & Floor Grout

TAL WALL & FLOOR GROUT is suitable for filling wall and floor tile joints between 2 – 8mm wide.  Available in a variety of colours, they offer resistance to moisture ingress.

TAL Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

TAL | Flex

TAL FLEX is a thin-bed polymer-based paste adhesive for fixing lightweight tiles to flexible surfaces, such as partition walling. TAL FLEX has immediate tile-grip characteristics, thus minimising the possibility of tile slump. As TAL FLEX gives immediate grip, it is ideal for fixing lightweight tiles in upside-down tiling situations such as window and doorway arches. TAL FLEX should not be used in extreme wet conditions, or on floors.

Goldfelx Ultra C2TFS2 Cement Based Adhesive

TAL GOLDFLEX ULTRA is a high strength, ultra flexible rapid setting grey cement based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for elevated flexibility and water resistance while maintaining ultra-tensile strength, usually only achieved by the addition of latex admixtures. The incorporation of dry-form polymers replaces the need for a latex bonding additive. Only clean water needs to be added, reducing mixing errors on site. It is suitable for using in all interior and exterior wall and floor applications and finds special use in fixing of glass tiles

TAL | Goldflex Ultra

TAL GOLDFLEX ULTRA is a high strength, ultra flexible rapid setting grey cement based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours. It is a one-component adhesive specially formulated to allow for elevated flexibility and water resistance while maintaining ultra-tensile strength, usually only achieved by the addition of latex admixtures. The incorporation of dry-form polymers replaces the need for a latex bonding additive. Only clean water needs to be added, reducing mixing errors on site. It is suitable for using in all interior and exterior wall and floor applications and finds special use in fixing of glass tiles.

TAL Sealmaster Cord

TAL SEALMASTER CORD is a flexible, readily compressible closed-cell polyethylene backing cord for use in conjunction with elastomeric joint sealants. TAL SEALMASTER CORD is fully compatible with TAL GOLD STAR SEALMASTER 1000 and most other joint sealants, such as silicone, polyurethane, polysulphide, etc.

Goldstar Sealmaster 1000

TAL Goldstar Sealmaster 1000 is a single component permanently flexible moisture curing polyurethane based adhesive and joint sealant. TAL Goldstar Sealmaster 1000 exhibits excellent properties for adhesion between most substrates and materials, including materials with dissimilar coefficients of expansion. TAL Goldstar Sealmaster 1000 is fast curing and is resistant to shock, vibration and temperature change when cured. Available in Grey. White and Black available by special order.

Water-Based Epoxy Grout

TAL Water-Based Epoxy Grout is a 2- Component, Water Based & Cleanable High performance Epoxy-resin Grout with excellent chemical, acid and stain resistant properties, formulated specifically for ease of application and clean-up.

Industrial Epoxy Grout

TAL INDUSTRIAL EPOXY GROUT is ideal for internal and external applications where chemical resistance and hygienic conditions are extremely important, such as abattoirs, breweries, dairies, food and beverage production and preparation areas, hospitals, mine change rooms, swimming pools, bacteria and mould growth areas, etc.  TAL INDUSTRIAL EPOXY GROUT is suitable for use in installations where tiling will be subjected to steam cleaning. TAL INDUSTRIAL EPOXY GROUT is simple to apply, with minimal wastage and excellent clean off properties.e

High Traffic Grout

TAL High Traffic Grout is a quick-setting grout designed to provide a durable, scratch and water resistant finish in high traffic and heavy traffic commercial installations such as retail centres and stores, car showrooms, etc as well as exterior installations. TAL High Traffic Grout also provides good resistance to mild organic acids in special locations such as dairies, abattoirs, citrus plants, and industrial/restaurant kitchens. Available in White and Dove Grey, TAL High Traffic Grout is suitable for filling wall and floor joints between 3 – 12mm wide.

Glint Blend of Mild Chemicals and Detergents

TAL Glint is a special blend of mild chemicals and detergents, designed to clean and shine ceramic, porcelain, granite, quarry and terracotta tiles and vinyl resilient flooring. It will also rejuvenate grout and remove calcerous deposits, unmodified cementitious deposits, grease and soap residues.

TAL Epoxy Cleaning Fluid & Gel

TAL EPOXY CLEANING FLUID and GEL are a blend of solvents specifically designed to clean off uncured TAL EPOXY GROUT residues from the surface of tiles after the grouting operation. These products are non-flammable

TAL Cleaning Solvent

TAL CLEANING SOLVENT is a non-flammable cleaning solvent suitable for removing grease, oil and wax deposits or residues from glazed tiles, metal surfaces and other non-plastic and unpainted surfaces which are not susceptible to solvent attack.

TAL Mosaicfix

TAL MOSAICFIX is a super white standard-setting cement based powder adhesive for fixing ceramic mosaics onto walls and floors. It can also be used as a grouting or pre-grouting of mosaics. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing.

TAL Mosaicfix Tile Adhesive for Bonding & Grouting of Mosaics

TAL Mosaicfix is a quick-setting high-strength cement-based powder adhesive designed for fixing ceramic, porcelain and natural stone mosaics onto walls and floors.  It can also be used as a grouting or pre-grouting of mosaics. The adhesive was designed for easy use, allowing up to 2 hours Pot Life after mixing.

Goldstar 18

TAL Goldstar 18 is a grey quick-setting high-strength cement based adhesive for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors. The adhesive was designed for easy use, allowing an 8 hour pot life. TAL Goldstar 18 can be applied in bed thicknesses between 3 – 6mm, and up to 12mm in isolated areas only.

Fine Epoxy Mortar & Grout

TAL Fine Epoxy Mortar & Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin non-sagging adhesive ideal for bonding tiles to walls and floors, and can also be used for subsequent grouting.  It has excellent non-sag, stain and chemical resistant properties and is easy to apply and clean up after application.  TAL Fine Epoxy Mortar & Grout is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. It is also suitable for use with glass tiles/mosaics and resin-bonded tiles.  TAL Fine Epoxy Mortar & Grout is available in Light Grey and White

Talfix

TALFIX is a grey quick-setting high-strength cement based adhesive ideally suited for, but not restricted to, smaller DIY installations and tile replacements. Suitable for fixing ceramic, porcelain, dark-coloured natural stone (granite, marble, sandstone, etc) tiles to walls and floors.

Wall & Floor Grout

Cementitious grout suitable for filling wall and floor tile joints between 2 – 8mm wide. Available in a variety of colours. Offers resistance to moisture ingress and fungal growth.

Tal Cleaning Solvent

TAL Cleaning Solvent is a non-flammable cleaning solvent suitable for removing grease, oil and wax deposits or residues from glazed tiles, metal surfaces and other non-plastic and unpainted surfaces which are not susceptible to solvent attack.

TAL Epoxy Cleaning Fluid

TAL EPOXY CLEANING FLUID is a blend of solvents specifically designed to clean off uncured TAL EPOXY GROUT  residues  from  the surface  of  tiles after  the  grouting  operation.  This  product is non-flammable.  TAL EPOXY CLEANING FLUID  is suitable for cleaning light epoxy residues on floors.

Screedmaster

TAL Screedmaster is a single-component high-performance self-levelling and smoothing Underlayment Compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates. Designed with high flow properties, when added to water it produces a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time.

Superscreed

TAL SUPERSCREED is a grey single-component high-performance levelling and smoothing underlayment. Floor coverings can be fixed after 24 hours, depending on application thickness and ambient conditions, once the moisture content of the floor has been tested and confirmed suitable to receive the intended floor covering. When mixed with TAL SCREEDBINDER (as a total water replacement) it is also suitable for use as a protective barrier over under tile heating elements and for commercial installations where rubber caster wheels form the majority of the traff.

Rapidfix

TAL RAPIDFIX is a single-component high-performance Patching and Repair compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates specially designed for repairing of deteriorated concrete and mortar surfaces as well as patching holes in floor and wall surfaces.

Bond Powder

TAL BOND POWDER is a white-coloured special blend of dry-form polymer-based powder additives designed to enhance bond strength, flexibility, water resistance and reduced/elevated temperature resistance of cement based tile adhesives and grout.

Screedbinder

A modified latex-based additive designed for use with TAL SUPERSCREED, enhancing the bond strength and flexibility of TAL SUPERSCREED. Should be used in place of water in the TAL SUPERSCREED mix when applied in high traffic areas, exterior or exposed areas, where building movement is expected (i.e. suspended slabs) and where thermal expansion and contraction is expected (i.e. under tile heating). Also used as an additive with TAL RAPIDFIX when applied in ‘wet’ or exposed areas.

Bond

A modified latex-based additive for cementitious adhesives and grouts. Enhances the bond strength, flexibility and water resistance of the adhesive/grout when used as a total water replacement in the mix.

Superprime

A blue, modified one-part moisture-curing polyurethane primer specially designed for difficult and dense surfaces, such as fibreglass, before tiling onto these surfaces. Also suitable for priming the backs of mesh-reinforced or resin-backed tiles, as cementitious adhesives are not compatible with these products.

Keycoat

A modified latex-based primer designed to improve adhesion to smooth, dense surfaces as well as porous surfaces prior to tiling. Applied neat onto rough, very porous surfaces, and in slurry form (1 part TAL KEYCOAT : 2 parts TAL GOLDSTAR 6 or 12, by volume) for smooth, dense surfaces. Apply by block brush, allow to dry before applying adhesive.

Keymix

TAL KEYMIX is a cementitious powder primer to be used in a 2:1 mix (by volume) with TAL KEYCOAT. This mix offers phenomenal adhesion to most dense, impervious and smooth surfaces such as: powerfloated/steelfloated concrete and screeds, existing tiles, glass, etc.

Acid Resistant Grout

A quick-setting, cementitious grout designed to provide good resistance to mild organic acids in special locations such as abattoirs, citrus plants, dairies and restaurants. NOTE : TAL EPOXY GROUTS should be used in installations where more stringent chemical resistance and/or hygienic conditions are required. TAL ACID RESISTANT GROUT is suitable for less demanding chemical resistance, e.g. mild organic acids, and areas where ease of application associated with cementitious grouting systems is required. Suitable for filling wall and floor tile joints between 3 – 12mm wide.

Epoxy Adhesive & Grout

TAL EPOXY ADHESIVE & GROUT is a high performance, 3-component epoxy-resin adhesive for fixing tiles to walls and floors, and can also be used for subsequent grouting.  TAL EPOXY ADHESIVE & GROUT is suitable for use with glass tiles/mosaics and resin bonded tiles, and is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas, etc.

Stain Free Grout

A cementitious grout specially designed to minimize the staining of highly porous tiles, such as sandstone and slate, overcoming the ‘picture frame’ effect encountered with standard grouts. Suitable for filling wall and floor tile joints between 3 – 12mm wide.  Available in Light Grey. Offers resistance to moisture ingress and fungal growth.

Quarrygrout

Cementitious grout suitable for filling wall and floor tile joints between 5 – 25mm wide.  Available in a variety of colours. Offers resistance to moisture ingress and fungal growth

Super White Wall Grout

Tal Super White Wall Grout is suitable for filling wall tile joints and offers resistance to moisture ingress.

Goldflex Grout

A rapid-setting, flexible, water-resistant cementitious grout, requiring no additional additives. Formulated to be fully set to allow traffic after only 3 hours. Ideal for remedial work and areas requiring quick access. Suitable for filling wall and floor tile joints between 3 – 12mm wide.

Professional Standard

TAL PROFESSIONAL is a grey general-purpose standard-setting cement based powder adhesive for fixing ceramic tiles to walls and floors. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing.

Stix

TAL STIX is a grey general-purpose cement based powder adhesive for fixing ceramic wall and floor tiles in interior and exterior installations, and was developed for the DIY market. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing

Professional White

TAL PROFESSIONAL WHITE is a white (light-coloured) general-purpose standard-setting cement based powder adhesive especially formulated for fixing white and light coloured ceramic tiles which are susceptible to glaze discolouration due to moisture pull through (ie grey adhesive shows through the light-coloured body of the tile). TAL PROFESSIONAL WHITE can be used for ceramic wall and floor tiles and was designed for easy use, allowing up to 3 hours pot life after mixing.

Flex

TAL FLEX is a thin-bed polymer-based paste adhesive for fixing lightweight tiles to flexible surfaces, such as partition walling. TAL FLEX has immediate tile-grip characteristics, thus minimising the possibility of tileslump. As TAL FLEX gives immediate grip, it is ideal for fixing lightweight tiles in upside-down tiling situations such as window and doorway arches. TAL FLEX should not be used in extreme wet conditions,or on floors.

Marblefix

TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1 1/2 hour pot life.

Marbleflex

TAL MARBLEFIX is a light-coloured rapid-setting high-strength shrinkage-compensated cement-based adhesive specifically designed for fixing white or light-coloured marble and travertine tiles and mosaics. TAL MARBLEFIX can also be used for fixing ceramic, porcelain, granite and light-coloured natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

Mosaicfix

TAL MOSAICFIX is a quick-setting high-strength cement-based powder adhesive designed for fixing ceramic, porcelain and natural stone mosaics onto walls and floors. It can also be used as a grouting or pre-grouting of mosaics. The adhesive was designed for easy use, allowing up to 2 hours Pot Life after mixing.

Porcelainfix

TAL PORCELAINFIX is a grey quick-setting high-strength shrinkage-compensated cement based adhesive for fixing porcelain tiles. It can also be used to fix other types of tiles. The adhesive was designed for easy use, allowing a 4 hour pot life.

Goldflex

TAL GOLDFLEX is a grey flexible rapid-setting high-strength shrinkage-compensated cement-based adhesive that allows grouting after only 3 hours, and full traffic after only 6 hours.  It is a one-component adhesive specially formulated to allow for flexibility, water resistance and increased strength, usually only achieved by the addition of latex admixtures. Only clean water needs to be added, reducing mixing errors on site.

Goldstar 12

TAL GOLDSTAR 12 is a grey quick-setting high-strength cement-based adhesive for fixing porcelain, granite, dark-coloured marble and natural stone, ceramic, clay and terrazzo tiles to walls and floors. The adhesive was designed for easy use, allowing a 4 hour pot life.

Goldstar 6

TAL GOLDSTAR 6 is a grey rapid-setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. The adhesive was designed for easy use, allowing a 1½ hour pot life.

Goldstar 2

AL GOLDSTAR 2 is a grey ultra-fast setting high-strength shrinkage-compensated cement based adhesive for fixing ceramic, porcelain, granite, dark-coloured marble and natural stone tiles to walls and floors. TAL GOLDSTAR 2 is ideal for remedial work and tiling in doorways and passages, where access is required soon after tiling.

Generic Specification Chart

TAL’s Wall and floor tiling generic specification chart.

TAL Stix

TAL STIX is a grey general-purpose cement based powder adhesive for fixing ceramic wall and floor tiles in interior and exterior installations, and was developed for the DIY market. The adhesive was designed for easy use, allowing up to 3 hours pot life after mixing.

Goldstar Sealmaster 1000

TAL GOLDSTAR SEALMASTER 1000 is a single component permanently flexible moisture curing polyurethane based adhesive and joint sealant. TAL GOLDSTAR SEALMASTER 1000 exhibits excellent properties for adhesion between most substrates and materials, including materials with dissimilar coefficients of expansion. TAL GOLDSTAR SEALMASTER 1000 is fast curing and is resistant to shock, vibration and temperature change when cured. TAL GOLDSTAR SEALMASTER 1000 is available in Grey. White and Black are available by special order.

Tile-to-Tile

TAL Tile-To-Tile is a grey quick-setting high-strength cement-based adhesive specially formulated for fixing most types of tiles onto smooth and dense surfaces such as existing tiles, powerfloated screeds, etc.  TAL Tile-To-Tile is suitable for fixing tiles to walls and floors, in interior and exterior applications.  Priming of some substrates may not be required due to the superior adhesion properties of this product.  The adhesive was designed for easy use, allowing a 4 hour pot life.  TAL Tile-To-Tile should not be used with white or light-coloured porous natural stone tiles, where a grey adhesive may show through the tile in the form of ‘staining.

TAL Porecelainfix

TAL PORCELAINFIX is a grey quick-setting high-strength shrinkage-compensated cement based adhesive for fixing porcelain tiles. It can also be used to fix other types of tiles. The adhesive was designed for easy use, allowing a 4 hour pot life

Screedmaster Industrial

TAL Screedmaster Industrial is a single-component high-performance heavy-duty industrial self-levelling and smoothing Underlayment Compound, manufactured from rapid-setting shrinkage-compensated cement and selected aggregates. Designed with high flow properties, when added to water it produces a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time.

Rapidfix

TAL Rapidfix is a single-component high-performance Patching and Repair compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates specially designed for repairing of deteriorated concrete and mortar surfaces as well as patching holes in floor and wall surfaces.  It is a multi-purpose system designed to withstand heavy loading and trafficking in both industrial and domestic installations.  TAL Rapidfix can be applied to fill holes prior to installing floor coverings, underlayments or screeds, or can be left exposed in both high traffic industrial applications, ie: factories, and in domestic applications

Self-Smoothing Polyurethane Flooring

TAL UraFloor SL is a 2 – 4mm commercial duty, flow applied, self-smoothing polyurethane floor topping, which provides a surface with excellent resistances to abrasion, chemical attack and other forms of physical aggression. TAL UraFloor SL is a seamless, smooth finish with uniform colour based on water dispersed polyurethane resin combined with reactive polyurethane hardener and graded silica aggregates. TAL UraFloor SL has excellent resistant to organic and inorganic acids, alkalis, fuel and hydraulic oils, aromatic and aliphatic solvents.

X-Tech UralFloor Ht, Screed Grade Applied to concrete

TAL X-Tech UralFloor Ht, Screed Grade application  to concrete  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Water-Based Epoxy Grout

TAL Water-Based Epoxy Grout is a 2-Component, Water Based & Cleanable High-performance Epoxy-resin Grout with excellent chemical, acid and stain resistant properties, formulated specifically for ease of application and clean-up. TAL Water-Based Epoxy Grout is ideal for installation areas where imperviousness, chemical and acid resistance and/or good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas as well as, areas subjected to high-pressure hosing and steam cleaning, etc. TAL Water-Based Epoxy Grout is available in Light Grey and White

X-Tite EpoxyGrout 150 Flowable Epoxy ResinGrout

X-Tite EpoxyGrout 150 is a flowable epoxy resin grout used for a variety of grouting and anchoring applications where high dynamic loads are anticipated and high early strength is required

Industrial Epoxy Grout (Fine & Coarse)

TAL Industrial Epoxy Grout is ideal for internal and external applications where chemical resistance and hygienic conditions are extremely important, such as abattoirs, breweries, dairies, food and beverage production and preparation areas, hospitals, mine change rooms, swimming pools, bacteria and mould growth areas, etc. TAL Industrial Epoxy Grout is suitable for use in installations where tiling will be subjected to steam cleaning. TAL Industrial Epoxy Grout is simple to apply, with minimal wastage and excellent clean off properties.

Expoxy Adhesive & Grout

TAL Epoxy Adhesive & Grout is a high performance, 3-component epoxy-resin adhesive for fixing tiles to walls and floors, and can also be used for subsequent grouting. TAL Epoxy Adhesive & Grout is suitable for use with glass tiles/mosaics and resin bonded tiles, and is ideal for installation areas where chemical resistance and good hygienic conditions are important, such as abattoirs, breweries, dairies, hospitals, food and beverage production and preparation areas, swimming pools, bacteria and mould-growth areas, etc.  Tal Epoxy Adhesive & Grout is available in Light Grey and White

X-Roc Galzinc, General use

Concrete repair is a skilled trade and should only be carried out by experienced workers. Application by unskilled labor may result in a poor quality work.

Decorative and Functional Cement and Resin Flooring Range

  TAL’s decorative cement and resin flooring range  for residential and industrial floors.

Installation Materials Essential for the Preparation of Soft Floor Coverings

TAL’s Comprehensive range of tools and materials for the preparation of soft floor coverings.

Tiling Solutions Guide

TAL’s tiling solutions for: bathrooms, showers, walls, floors upstairs room, existing tiles, exterior balconies, light coloured marble and travertine

X-Calibur® X-Tech DecoQuartz Range

TAL’s DecoQuartz Flooring Systems include: X-Tech DecoQuartz QB – Decorative colour quartz broadcast epoxy floor system, X-Tech DecoQuartz HT- Abrasion of heat resistant decorative epoxy floor screed, X-Tech DecoQuartz TF – Abrasion and chemical resistant decorative epoxy floor screed, X-Tech DecoQuartz EF – Decorative polyurethane floor and wall coat.

X-Calibur® High Performance Epoxy Floor Systems

TAL’s X-Tech Epoxy floor systems including: X-Tech EpoxyAqua 100 – High performance wall and floor coating for concrete, X-Tech EpoxyFloor SL – Abrasion and chemical resistant self-leveling epoxy floor, X-Tech EpoxySeal FLR100 – High performance sloven free floor coating for concrete, X-Tech Epoxy TF Abrasion and chemical resistant self leveling epoxy floor screed.

X-Calibur® High Performance Urethane Floor Systems

TAL’s Urethane Flooring Systems include: X-Tech Urafloor TF – General purpose heavy duty polyurethane screed, X-Tech Urafloor CS – Heavy duty polyurethane screed for cold stores, X-Tech Urafloor SL – General purpose self leveling polyurethane screed, X-Tech Urafloor H- Heavy duty polyurethane screed for high temperature applications.

X-Calibur® X-Tech StoneFlow

Tal’s X-Tech StoneFlow is a cement based self smoothing, heavy duty decorative screeding system which is supplied in a wide range of colours and aggregate finish and is shrinkage compensated and rapid setting. The system is specially designed for use in industrial, institutional, commercial and residential environments, on both new construction and renovation projects. It is designed for applications in cases of exposure to heavy traffic and abrasion.

X-Calibur® X-Tech SuperFlow

TAL’s  X-Tech SuperFlow is suitably designed for application onto concrete substrates. Allow all new concrete work and screeds to cure for at least 6 weeks and 4 weeks respectively before proceeding. The substrate must be structurally sound, clean and dry and free from all traces of surface laitance and contamination such as dust, dirt, waxes, oils, bitumen, old adhesives, paint, grease, weak cement screeds, shutter release and curing agents, sealing compounds, etc. All damaged, defective, deteriorated, friable (powdery) and hollow sounding areas must be removed until a solid background is achieved. These areas must be made good before proceeding.  The surface must be prepared, by captive blasting or grinding, to ensure that the aggregate in the concrete is fully exposed and open, ie to achieve a Concrete Surface Profile (CSP) of 5 or 6 (Medium Scarification).

X-Calibur® High Performance Shake On Floor Systems

TAL’s high performance shake on systems including: X-Tech IntegraFloor Emery, X-Tech IntegraFloor Quartz and X-Tech Integrafloor S.

Product Installation Guide

TAL’s  installation guide on the following products: substrate preparation, screeding, waterproofing, tiling, cutting wall tiles, wall tiling, floor tiling, colour selecting and how to limit cracking and lifting tiles.  

X-Calibur® Fusion™

In commercial & retail application FUSION™ offers the durability, colour intensity, smoothness and beautiful detailing to suit the most demanding of environments. The surface is finished and sealed to provide enhanced stain & abrasion resistance with an easy maintenance regime.

Car Park Solutions

X-Tech Car Park Solutions from TAL.

Brochures & Datasheets



Copyright © 2019 New Media, a division of Media24. All rights reserved.