Search results for

coatings

Brochures & Datasheets

abe® VIP Germany | Chalktank at Power Plant - Germany

The Vattenfall Europe Generation AG was searching for a new system for sealing and coating tanks on the inside with a high degree of abrasion resistance against the abrasive mixture of chalk and water. On an already coated tank, where the old coating partly became delaminated, the choose to have an area of 40 m² freshly coated to evaluate the new Quickspray Industrial LSE (aromatic). RIW as preferred Applicator was available at short notice to do the repair even in harsh winter conditions. To save time and money the customer choose QuickSpray Industrial LSE (Non stick version with low surface energy), a 100% Polyurea 2-K Hot Spray Coating based on Prepolymer and Polyamine technology.

abe Flooring Product Selector

abe Flooring Product Selector * Dry Shakes * Coatings * Screeds * Micro Toppings * Case Hardening * Adhesives * Primers * Covering / Wall Render * Curing

X-Tech IntegraFloor Emery Emery based monolithic floor hardening compounding

TAL X-Tech IntegraFloor Emery is a premixed non rusting floor hardener used to form a monolithically hardened concrete floor. It produces an abrasion resistant and hard wearing surface and is applied by the shake on technique.

Waterproofing Products | a.b.e Construction Chemicals

a.b.e.® Construction Chemicals‘ range of waterproofing products and systems include specialised bituminous sheets, liquids, putties, cementitious based products and silanes. Bituminous sheet products are used to waterproof flat roofs, basement walls and to line earth dams and canals. Liquid systems and putties including acrylics, solvent-based bitumens and water-based rubberised acrylic modified bitumens which are used to seal parapet walls, small flat roofs, roof bolts, flashings and ponds. Cementitious slurry products are used to waterproof basements, foundations, tunnels, retaining walls, brickwalls and other underground structures. The silane systems are used to prevent water penetration of brick and natural stone.

X-Tech DecoQuartz QB applied to concrete

TAL – X-Tech DecoQuartz QB application to concrete installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

CreteStain walls | Cemcrete | Acid-based cement / concrete stain

CreteStain Wall Finish – An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

ALUCOBOND ® At a glance | original aluminium composite material

ALUCOBOND composite material surfaces are coated using exclusively high-quality and eco-friendly lacquer systems. They are highly weather-resistant and resistant to industrial emissions. These properties are achieved using UV-resistant bonding agents. For top-level architecture in exterior applications, we use high-grade polymer coating systems, e.g. PVDF and FEVE lacquers, which have proved ideal for architectural applications.

abe® Project | Futurelife Production Plant

abe.®cote 400 Hi-build is an economical four-component, solvent-free epoxy flooring system comprising a clear resin and hardener, pre-packed filler and a ready for- use pigment paste. Ideal for food processing plants and can be used as binder for abrasive grit to yield nonslip floor finishes. abe.®cote 400 Hi-build has good protective qualities and resistance to chemicals. Reduces maintenance, seamless and hygienic and is available in a range of colours.

Membranes Datasheet

Membranes Datasheet Thin pliable sheets of material forming a barrier or lining

abe® Rustopak Red Penetrant Sealant

abe® Rustopak Red Penetrant Sealant is a low VOC penetrating liquid used in conjunction with abe® Rustopak Top Coat. It is a single component, specifically compounded system, bound together with a calcium sulfonated alkyd in an aliphatic hydrocarbon that is applied over surfaces with tightly adherent rust and also hard to reach areas such as crevices which are properly sealed off without the need of dismantling equipment.

abe Waterproofing Product Selector

a.b.e Construction Chemicals Waterproofing Product Selector * Liquid Applications * Torch Applied Membranes * Cold Applied Membranes * Drainage * Eco Waterproofing

CemWash | Cemcrete | Rough textured cement wall finish

Cemwash is a Rough textured cement wall finish A two-coat decorative, coloured, weatherproof cement finish; supplied as CemWash first coat grey and CemWash top coat in the colour of your choice. Having a base of Portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. The purpose is to provide a tough, durable cementbased coating directly to brick, block or hard cured plaster walls.

Pool Coating Datasheet

Pool Coating Datasheet – A two-pack cement-based coating which can be applied easily and quickly using a paintbrush. Having a base of white Portland cement it sets rock hard, performs well underwater and can be repeatedly scrubbed if necessary. Because of its critical formulation, it has an excellent bond, flexural and tensile strength, good abrasion and chemical resistance and reduced drying shrinkage. It is non-hazardous and potable water can be stored in structures treated internally with it.

X-Tech EpoxyAqua 100 High performance wall and floor coating for concrete

X-Tech EpoxyAqua 100 is a high performance, breathable epoxy wall and floor coating that is also decorative and suitable for use in a wide range of applications.

X-Tech AntiStatic SLE Conductive epoxy flooring system

TAL – X-Tech AntiStatic SLE is a three layer system comprising an epoxy primer, a water dispersed epoxy base coat and a self smoothing epoxy top coat that produces a conductive or dissipative floor. The conductive grade (CG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. The dissipative grade (DG) provides a floor with a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

X-Tech EpoxyFloor SL3 Abrasion and chemical resistant self-leveling epoxy floor | TAL

X-Tech EpoxyFloor SL3 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 3 to 4mm thick.

X-Shield VaporStop HB Method Statement

TAL- X-Shield VaporStop HB  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Affordable Housing | Cemcrete | Cost-effective wall coatings

Cemcrete’s affordable housing cost-effective wall coatings for mass housing projects with one coat acrylic PVA Khozi Coat for interior and exterior surfaces

CemCote (Skimmed) Datasheet

CemCote Skimmed datasheet is a pigmented, thin film cement- based decorative wall covering which is versatile and durable. It is a two coat system which produces a 1.5mm smooth decorative finish suitable for application onto new plastered walls that have been sponge, wood or steel floated, or previously painted walls. It is ideal for internal and external domestic or commercial applications. CemCote can also be brush applied if a different finish is required. See CemCote (Brushed) datasheet.

High Performance Coating Solutions | abe | Product Selector

High Performance Coating Solutions with polyurea technology. Primer and moisture barrier, elastometric lining, waterproofing and joint sealing.

X-Tech IntegraFloor Quartz Monolithic floor hardening compound

TAL X-Tech IntegraFloor Quartz is a premixed non rusting floor hardener used to form a onolithically hardened concrete floor. It produces an abrasion resistant and hard wearing surface and is applied by the “shake on” technique.

TPC Roof | Cemcrete - colourful coating for roofs

TPC Roof | Cemcrete – colourful coating for roofs

THENGA KUPHELA IIPALI ZAMAPLANGA EZIQINISEKISIWEYO EZINEEMPAWU EZICHANEKILEYO

THENGA KUPHELA IIPALI ZAMAPLANGA EZIQINISEKISIWEYO EZINEEMPAWU EZICHANEKILEYO

CemBond | Cemcrete | Polymer based resin

Cemcrete’s Cembond is a polymer based resin or bonding liquid that is compatible with cement, lime, sand and gypsum and adheres to concrete, brick, tiles, cement, plaster and stone.

Exterior Crack Filler | Cemcrete | Tough Waterproof Crack Filler

Exterior crack filler is a very tough waterproof filler based on special thermoplastic resins and fillers. Softens slightly with increases of temperature, thereby relaxing the tension in the crack.

VIP QUICK COAT | Ultra Fast Coating System with Superior Colour & Gloss Retention

VIP QUICKCOAT™ ULTRA FAST COATING SYSTEM WITH SUPERIOR COLOUR & GLOSS RETENTION Anti-corrosive and weather-proof surface protection solutions.

CemCote Skimmed | Trowel-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

Thermoplastic Coating Datasheet

Thermoplastic Coating Datasheet tough, thermoplastic, textured, weatherproof coating. Contains Mica and silica for maximum film protection

Superscreed SL

TAL Superscreed SL is a grey single-component high-performance self-levelling and smoothing Underlayment Compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates, designed with high flow properties when added to water to produce a smooth and durable floor surface prior to the fixing of floor coverings with minimum installation time.

Exposed Aggregate Colour Chart

Exposed Aggregate Colour Chart – sea salt, black pepper, chia seeds, poppy seed, mustard, cumin, caraway and other natural textures.

Pool Coating Start-Up Guide

Pool Coating Start-Up Guide – An important step-by-step guide to the chemical treatment of pools after Pool Coating application.

RenoCrete Datasheet

Concrete Resurfacing Solution Cemcrete’s RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

Stab-A-Load | HydroSwing® Hydraulic Doors & Walls

Large industrial hydraulic doors and walls for the mining industry. The HydroSwing is pre hung in its own frame and can be installed to tensile fabric structures or stand alone within its own frame. Each door is finished in Carbo Guard Carboline but galvanising and powder coating can be done upon request.

Sikafloor® and Sikagard® Selection Guide

Sikafloor®-CR and Sikagard®-CR ranges are the state of the art in products specifically developed for floor, wall and ceiling coatings in cleanroom environments. Sikafloor and Sikagard are suitable for all clean manufacturing facilities with a controlled level of contamination, such as minimum particle and VOC/AMC emissions.

Colour Hardener Datasheet

Colour Hardener Datasheet – A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, lightfast pigments and certain additives which set rock-hard and which has exceptional abrasion resistance. Some cement floor finishing experience is required for the success of this application.

abe | general construction | product selector

General Construction Product Selector – adhesives – coatings / sealants – curing compounds – grouting – mortars – auxiliaries

Pool Products | Cemcrete

Finishes – PoolCrete, Pool Coating, BeadCrete & Pool Repair Products

X-Prime MT100 High Performance moisture tolerant primer and sealer for coating and floor systems

X-Prime MT100 is a high penetration primer suitable for use with a wide range of epoxy coatings and floor systems on substrates that have a high moisture content.  It can also be used as a stand alone sealer for green concrete.

VIP QUICK SEAL | New Technology Waterproofing Solutions | abe

VIP QUICK SEAL – new technology waterproofing solutions, spray applied, instant setting, strong, seamless and flexible.

X-Tech DecoQuartz QB Durable and decorative epoxy floor system

X-Tech DecoQuartz QB is a combination of colored quartz aggregate and 100% solids liquid epoxy resin that when applied, forms a seamless, colorful, chemical resistant and long wearing floor.

Primer Aggregate Graded Silica Sand for Mechanical Keying and Slip Resistance

TAL Primer Aggregate is high-quality well-graded silica sand.  It provides a mechanical key for resin flooring systems as well as cementitious screeds/toppings/underlayments. TAL Primer Aggregate is also used in conjunction with TAL resin flooring and coating systems to provide a slip resistant finish. Available in Fine (SQ1), Medium (SQ2) and Coarse (SQ3).

Natural Durability of Wood

An important consideration when building with timber is predicting how long the structure will last. Whilst insects, decay or rotting organisms and marine borers can all attack wood, some timber species have the ability to resist attack better than others. The natural durability of a species to resist attack by wood destroying organisms is an indication of how long that timber will last when it is exposed to a defined set of exposure conditions without any additional preservative protection. The natural durability of timber species varies, even so within the wood from the same species of tree, depending on whether its sapwood or heartwood.

CCA (Copper Chrome Arsenate) Preservative Treated Wood

CCA Preservative Treated Wood SAWPA SAFETY PRECAUTIONS AND WARNINGS FOR USE, HANDLING AND DISPOSAL

abe® Rustopak Top Coat

abe® Rustopak Top Coat is a low VOC, active rust inhibitive sealant, for use as a single coat direct to metal (DTM) that does not have to be rust free. Tightly adhered rust on structural steel must be without contaminants like oil, grease, salt, etc.

380 Series Casement Windows | Aluplan

Aluplan’s 380 series casement window system provides weather proof openings which maximise admission of light and the benefits of good weather.

Africote Paints & Coatings

Africote Paints & Coatings Interior Paint & Decor Plasters | Exterior Paint & Waterproofing | Decorative & Wall Renderings | Seamless Floor Screeds & Primers

CreteCote Datasheet | Cemcrete

CreteCote Datasheet CreteCote is a coloured, thin-film cement-based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish suitable for application onto wood or steel floated concrete floor slabs or screeds and is ideal for internal domestic applications. Comes complete with powder and catalyst in a twin pack.

SAWPA | Sapwood and Heartwood

A tree trunk has three main zones; the bark, the sapwood and the heartwood. Trees are basically triangular in shape and they gain height by growing outwards and upwards. At the start of each growing season, a new layer is added to the outside of the wood so that every part of the tree gets bigger – roots, trunk, branches and twigs.

BeadCrete Datasheet

BeadCrete Datasheet – BeadCrete is a factory-blended ready to use aggregate render for use on reinforced concrete pool interiors. BeadCrete produces a significantly superior aesthetic appearance. The finish is not coarse for low risk of skin abrasions and is easily applied to new or renovated pool interiors by competent tradespersons.

Cemcote (Brushed) Datasheet

CemCote (Brushed) is a finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water on-site to produce a smooth, flowing coating which sets rock hard and is unaffected by UV light. CemCote can also be skimmed if a different finish is required. See CemCote (Skimmed) datasheet.

X-Pruf SBE

X-Pruf SBE is a solvent free bitumen emulsion containing wetting and thixotropic agents.  It is supplied in two grades: • Standard: For use on horizontal surfaces and slopes up to 45o (ASTM D1227, Type III, Class 1) • Fiber Reinforced: For use on vertical surfaces and on slopes above 45o (ASTM D1227, Type II, Class 1)

X-Pruf CrystalCoat

X-Pruf CrystalCoat is a one component, crystalline cementitious material that penetrates new and old concrete to resist hydrostatic pressure.

Waterproofing Products | Cemcrete | Treatment of damp & pond lining

Products for waterproofing, treatment of damp & pond lining. Water-repellent cement additive

Stipplecrete | Cemcrete - direct to concrete and brick coating

StippleCrete provides an exceptionally long-lasting, weatherproof, economic coating for fair face brick-work or concrete in one coat.

Reserved Parking Blocker

Reserve your parking spot with the MY PARKING reserved parking blocker. It has a hot dip galvanised finish – ideal for corrosive environments (additional powder coating also available). Supplied with a fixed pin lock for convenience. Supplied with lugs for locking with a padlock. Rubber stoppers for a soft landing when lowered. Can be lowered in forward and backward position.

abe® VIP Germany Project | Sum Wing for a deep sea Trawler - Nederland

PU Nederland got the order as new preferred applicator for VIP to coat a SumWing for a deep sea trawler. To save time and money the customer choose QuickSpray Industrial LSE, a 100% pure Polyurea 2-K Coating based on Prepolymer and Polyamine technology with very good non stick properties and a low surface energy.

abe.® screed dura.® Top

abe.®screed dura.®Top is a single component, quick hardening, self-smoothing, shrinkage compensated cement based overlay for levelling floors.

SAWPA | Exterior Wood Finishes: Selection, Application, Maintenance and Renovation

Exterior surface coatings play an important role in the final steps of the manufacture or construction and later, in the maintenance and renovation of wooden objects and structures. The consumer expects a reasonable level of performance from these finishes. However, the performance and hence the selection of an acceptable finish for an exterior wooden structure or product is influenced by several factors. These include wood characteristics, environmental exposure conditions, appearance of the finished product as well as durability, cost, ease of application, maintenance and renovation or removal of the finish….

X-Tech EpoxySeal FLR100, General use

TAL – X-Tech EpoxySeal FLR100, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Shield BugFill

X-Shield BugFill is a high build thixotropic epoxy resin for filling bug holes (blow holes) in concrete, and surface imperfections in steel, prior to the application of epoxy, polyurethane and polyurea coatings. It is also used as a general purpose adhesive, liner and bedding compound.

X-Tech UraFloor CS Heavy duty polyurethane screed and mortar for cold stores

TAL – X-Tech UraFloor CS is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock and that been specifically developed for use in cold stores and freezer rooms.

Superscreed SL Method Statement

TAL – Superscreed SL general purpose method statement, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Khozi Coat Datasheet

Khozi Coat Datasheet High opacity water-based acrylic emulsion paint for interior and exterior use. Paint and coating products from Cemcrete.

Car Park Solutions

X-Tech Car Park Solutions from TAL.

CreteBond Datasheet

CreteBond Datasheet – A non-toxic polymer emulsion admixture for cement plasters, screeds and concrete. Unaffected by water and exposure to ultraviolet light.

Africote Colour Palette | Internal & External Coatings - Signature Acrylic

Africote Colour Palette of Signature internal & external coatings for any mood, feature walls with accented tones, platinum velvet, sheen, liquid naturals and textured.

a.b.e. Product Segment Manual

a.b.e Segment Manual: Concrete Repair and Protection, General Construction, Flooring, Silicones, Sealants and Adhesives, Waterproofing, High Performance Coating Solutions

Company Profile

a.b.e.® Construction Chemicals was founded in 1932 but started operations in 1939 in Durban as a supplier of bitumen to municipalities in KwaZulu-Natal. a.b.e.® has over the years grown in both size and diversity to become a major supplier of specialised construction products to the building, civil engineering and building maintenance industries, supplying products directly to customers through its branch network as well as through builders’ merchants and hardware stores.

abe® peel & stick membrane

abe® peel & stick membrane is a universal, self-adhesive waterproofing membrane comprising of a unique ethylene polymer modified bitumen, incorporating an exposed spunbond, non-woven, polypropylene fabric that is alkali resistant to receive cementitious and water based acrylic resin coatings and adhesive systems.

Roofs | Cemcrete | Products for Roof Repair and Finishing

Roofs Repairs and Finishing, Roofseal, Thatchcrete, TPC Roof, Colour Range

Concrete Hardener Datasheet

Concrete Hardener Datasheet – For improving the hardness and denseness of concrete and reducing dusting and permeability. This cuts down dusting, improves resistance to staining from oils and other spillage’s and provides a harder wearing surface.

X-Tech EpoxyFloor TF applied to concrete

Method Statement on how to apply TAL- X-Tech EpoxyFloor TF  to concrete.

Kanengo Silo Project - Concrete Repair

Kanengo Silo Project – The rehabilitation of the grain silos. The repair and upgrade were carried out by using abe®silocoat – an elastomeric cementitious waterproofing coating that cures to form an impermeable membrane. abe®silocoat is a two-component polymer modified cementitious coating, supplied in a pre-packaged form.  Advantages are excellent crack accommodation after immersion, effective barrier to sulphates and chlorides and low pH.  Withstands high positive and negative hydrostatic pressures. abe® silocoat is approved for use in contact with potable water.

Cemcote Brushed | Brush-on cement wall coating

A finely ground mixture of white Portland cement, pigments and chemicals. It is supplied in powder form requiring mixing with water onsite to produce a smooth, flowing coating which sets rock hard.

New Concrete Flooring

CHRYSO offers complete and technically advanced solutions for finishing and decorative aesthetics in cementitious flooring. Through our technical expertise and experience, CHRYSO continually develops new and innovative products to meet the modern requirements and benefits of cementitious flooring.

Flooring Systems Product Brochure abe construction chemicals

a.b.e.® Construction Chemicals‘ range of specialised floor coatings are screeds based on bitumen, dry shake cementitious materials, self levelling cementitious screeds, epoxies and polyurethanes. Typical applications are the protection of concrete floors and screeds against wear from traffic abrasion, as well as a range of chemical and thermal shock requirements. Certain products can also be used to provide decorative floor finishes to car showrooms, hardware stores, supermarkets and other retail outlets.

CreteStain floor | Cemcrete | Acid-based cement / concrete stain

An acid-based mixture containing special chemicals which reacts with the OPC in cement/concrete and permanently colours the surface.

AtroGuard Technology | Water Resistant Flooring

AtroGuard was developed to combine both laminate and Luxury Vinyl advantages into one truly multi-functional laminate floor. These advantages include: kitchen, full bathroom & laundry room installation, commercial ACS wear resistance, high number of colour variations within one decor (up to 48 different planks)…

VIP QUICK SPRAY | High Performance Elastomeric Lining Systems | abe

FEATURES AND BENEFITS OF VIP QUICKSPRAY™ • Spray or cast applied to any substrate and to any shape • Rapid application and instant curing results in faster turnaround times – saving you money • Moisture Insensitive technology for application in extreme climatic conditions • Can be built to any thickness in one single application • Excellent adhesion to virtually all substrates • Excellent abrasion, impact and corrosion resistance • Excellent resistant to most chemicals, solvents, acids and caustics • High impact & abrasion resistance, maintains flexibility • Seamless, impervious, flexible membranes – no joins or welds • Formulas for Chemical containment to potable water • 100% solids – solvent free and VOC-free • Absorbs, vibration, impact and shock waves • Excellent thermal stability. Remains flexible over a wide range of temperatures

Concrete Primer Datasheet

Concrete Primer Datasheet Concrete Primer is a modified liquid cement primer to be used on floated (rough) and porous surfaces, ensuring a good bond onto the substrate. Dense, impervious surfaces should be ground so as to expose the surface pores and to create a relatively flat and level surface.

Boiler Plaster Datasheet | Cemcrete

Boiler Plaster Datasheet A fibrous insulation plaster with good adhesive properties. Suitable for use indoors and outdoors and does not pose a health risk since it is asbestos-free and contains no hazardous materials. The workability enables a smooth, weather-resistant finish which can be painted after the plaster has dries

X-Shield BugFill, General Use

TAL method statement on X-Shield BugFill, General Use and application

Screedmaster Industrial

TAL Screedmaster Industrial is a single-component high-performance heavy-duty industrial self-levelling and smoothing Underlayment Compound, manufactured from rapid-setting shrinkage-compensated cement and selected aggregates. Designed with high flow properties, when added to water it produces a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time.

Africote Waterproofing Products

Africote Waterproofing Products Platinum Waterproofing – Dual cementitious / acrylic based waterproof coating Bitumen Aluminium – rust inhibitive coating Fibreshield – with fibre Watershield – without fibre

Construction Solutions: Long-Lasting, High-Quality Health-Care Facilities

Construction of Health-Care Facilities with Sika At Sika we take care to help you produce facilities with a comfortable and hygienic interior environment for both patients and staff. This environment is then assured and protected by a good looking, watertight and secure building envelope that is achieved using Sika solutions to further save money by minimising energy consumption and reducing future external repair and maintenance requirements..

TPC Roof Datasheet

TPC Roof Datasheet A tough, thermoplastic, weatherproof coating. Contains Mica and silica for maximum film protection against ultra-violet light and weather abrasion. Supplied ready for use. Application by brush or roller. SABS 2000 hour artificial weathering test report available on request.

X-Calibur® High Performance Urethane Floor Systems | TAL

TAL’s Urethane Flooring Systems include: X-Tech Urafloor TF – General purpose heavy duty polyurethane screed, X-Tech Urafloor CS – Heavy duty polyurethane screed for cold stores, X-Tech Urafloor SL – General purpose self leveling polyurethane screed, X-Tech Urafloor H- Heavy duty polyurethane screed for high temperature applications.

Exposed Aggregate Floor | Cemcrete | Flooring and walkways

Exposed Aggregate mix is a thin decorative stone cementitious bound system. Ideally suited for external residential and commercial applications such as alfresco retail shops, restaurants, patios, walkways, driveways, pool surrounds, etc. where the minimum maintenance and reduced slip-resistance is required.

abe.®flo | EPOXY SELF-LEVELLING FLOORING SYSTEM

EPOXY SELF-LEVELLING FLOORING SYSTEM abe.®flo is a four-component solvent-free self-levelling flooring surface system. The system comprises a clear resin and hardener system, prepacked blended aggregate and a ready-for-use pigment paste.

Sealers | Cemcrete | Transparent Protective Coatings

Cemcrete Sealers are transparent protective coatings. Protecting cement floors and walls with a good quality Cemcrete sealer is crucial and not only makes the surface easier to clean, but it also offers other benefits as well, such as enriching the colour intensity of the overlay, blocking the penetration of stains, and improving water repellency and abrasion resistance.

X-Tech EpoxySeal FLR100 Chemical resistant high build epoxy floor coating

TAL – X-Tech EpoxySeal FLR100 is a high performance, high build, solvent free epoxy floor coating that is also decorative and suitable for use in a wide range of applications. It can also be used as a wall coating.

abe.®cote 337 | Tough epoxy paint

Tough Epoxy Paint abe.®cote 337 is a two component, solvent free, water-dispersed, polyamide cured epoxy.

X-Shield VaporStop HB

TAL – X-Shield VaporStop HB is a moisture tolerant, two component solvent free epoxy primer. On curing it produce a high cross link density barrier coat that prevents the debonding of coatings and floor toppings due to high moisture vapor emission rates (MVER).

Concrete Sealer Datasheet | Cemcrete

Concrete Sealer Datasheet Recommended for the sealing of concrete against staining, mottling and general discolouration. Useful for protecting architectural and exposed aggregate concrete, split concrete masonry and brick walls.

Terra-Stone: Authentic Terrazzo

Terra-Stone is a technically advanced and chemically modified conglomerate tile, available in a slim line full bodied Terrazzo with a nominal 600x600x20mm format. The tile is manufactured in a wide selection of standard colours. Architects and designers can, however, request custom mix designs and border mosaic accessories at a small premium, depending on the quantity required

X-Tech UraFloor CS applied to concrete for use in freezer room

TAL – X-Tech UraFloor CS applied to concrete installation Guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information given is a summary intended for guidance only.

Rufflette | Healthcare Systems

Silent Gliss products for Healthcare Systems.

abe® VIP Germany Project | Water & Power Project - Qatar

Ras Girtas Water & Power Projects required a WRAS Certified, fast curing surface coating system with high mechanical abrasion resistance, no VOC contents, no cracking and stable features for their newly constructed potable water tanks at the desalination plant at Ras Laffan.  Application with 1:1 heated, high-pressure, plural component equipment (Graco XP-2). Pressure of time for fast completion and cost advantages favoured QuickSpray Supreme W (aromatic), a WRAS Certified, 100% Polyurea 2-part Coating-System derived from a reaction of Isocyanate and Amine terminated resin.

Stab-A-Load | Kelley HVLS Fans

Kelly’s high volume low speed fans are designed to provide an energy-efficient solution for large spaces. Using the laws of physics and aerodynamics, HVLS fans require much less energy than traditional HVAC systems, and provide year-round employee comfort and temperature control.

Floor Products | Cemcrete - preparation, finishes, sealers & maintenance

Cemcrete range of floor products for floor preparation, finishes, sealers and flooring maintenance. Product information overview for flooring.

Concrete Repair & Protection | Silocoat

abe® silocoat is a two-component polymer modified cementitious coating, supplied in a pre-packaged form. The product has been designed to be easily mixed on-site using a slow speed drill and paddle, and then applied to the substrate using a brush, roller or airless spray application. abe® silocoat cures to form an elastomeric impermeable membrane.

TexCrete | Cemcrete | Fibre-cement casting mix

TexCrete is a fibre-cement casting mix A thixotropic, quick setting, enhanced fibre-cement blend. Mixed with a solution of FlexBond for the saturation and impregnation of CemForce to form a reinforced product that can be cast into latex or silicone moulds. Produces castings of about 4 to 8 mm in thickness.

abe® Project | Air Liquide

abe® – Air Liquide Gauteng had drainage issues which needed the flooring to be re-levelled with abe.dur.

X-Tech DeckCoat CP - General Use

TAL X-Tech DeckCoat CP installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Superscreed | Cemcrete | Thin High-Strength Screed

Superscreed is a thin high-strength screed. A 10-20mm high-strength, shrinkage compensated granolithic type screed mix.

SatinCrete | Cemcrete | Decorative interior coloured plaster

SatinCrete is a thin skim, cement-based decorative plaster that creates a smooth, coloured finish for interior use only.

X-Tech Urafloor HT, Self Leveling Grade, Applied to concrete

TAL – X-Tech UraFloor HT, Self Leveling Grade application to concrete installation Guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Concrete Hardener Datasheet

Concrete Hardener Datasheet A clear ready-to-use chemical compound that reduces dusting and densifies porous concrete.

PlasterCote | Cemcrete | Thin, leveling plaster for walls

PlasterCote – thin, leveling plaster for walls. A specially designed cement-based plaster mixture for rapid thin application to brickwork and blockwork to fill the joints and other imperfections economically. To provide a level base for the application of Cemcrete’s SatinCrete, CemCote, CemWash, Thermoplastic Coating, StippleCrete and Texturite Roughcast to walls constructed with bricks or blocks0860

Product Segments

a.b.e. Construction Chemicals product segments include concrete repair and protection, general construction, flooring, silicones, sealants and adhesives, waterproofing and high performance coating solutions…

a.b.e Construction Chemicals Company Profile

a.b.e.® Construction Chemicals was founded in 1932 but started operations in 1939 in Durban as a supplier of bitumen to municipalities in KwaZulu-Natal. a.b.e.® has over the years grown in both size and diversity to become a major supplier of specialised construction products to the building, civil engineering and building maintenance industries, supplying products directly to customers through its branch network as well as through builders’ merchants and hardware stores. a.b.e.® has manufacturing plants in Johannesburg (Boksburg) and Durban (Isipingo). Supported by a network of branches and distributors throughout South Africa, subSaharan Africa, the Indian Ocean Islands, a.b.e.® is ideally positioned to service its customers. CHRYSO Southern Africa acquired a.b.e.® in September 2010. CHRYSO SA has established itself as a major supplier of concrete and cement admixtures in South Africa due to its investment in plant infrastructure, new technologies as well as technical and customer support. The acquisition by CHRYSO provides a.b.e.® with new technologies and ongoing research and development programs to further enhance its position in the market and add value to their customers. a.b.e.® is committed to its sustainability policy, adopted from the CHRYSO Group, to sustain the seven values across economic, environmental and social commitments. a.b.e.® will continually invest and work on improving its structures as well as upgrading production facilities, and strengthening its research and development programmes while using existing channels in the market to introduce new products that further enhance its current product range and service offer to customers.

EIFS BaseCoat Datasheet

EIFS BaseCoat Datasheet EIFS BaseCoat is a special mixture of various admixtures and Ordinary Portland Cement for repair of concrete and masonry, adhering and surfacing of EIFS insulation boards prior to applying Cemcrete’s decorative coatings.

SAWPA | Disposal of Treated Wood

Disposal of treated wood guidance note. Treated wood waste includes treated wood debris from construction activities and may include trimmings, offcuts, scrap and sawdust. Treated wood waste also includes demolition products that have been permanently removed from use, e.g. decks, fences, docks and vineyard poles.

PoolCrete | White & Coloured Marble Pool Plaster

POOLCRETE White & coloured marble pool plaster A 6mm thick smooth plaster recommended for the interior plastering of walls and floors of swimming pools, which becomes a very hard integral part of the pool structure. Not for use above the water level.

TPC | Cemcrete | Durable wall & ceiling paint

TPC – Durable wall & Ceiling Paint. A tough, thermoplastic, textured, weatherproof coating. Contains Mica and Silica for maximum film protection against ultra-violet light and weather abrasion.

Isowall | Face Material Colour Range

Isowall – ArcelorMittal South Africa Limited standard Colour Chart

X-Calibur® X-Tech DecoQuartz Range | TAL

TAL’s DecoQuartz Flooring Systems include: X-Tech DecoQuartz QB – Decorative colour quartz broadcast epoxy floor system, X-Tech DecoQuartz HT- Abrasion of heat resistant decorative epoxy floor screed, X-Tech DecoQuartz TF – Abrasion and chemical resistant decorative epoxy floor screed, X-Tech DecoQuartz EF – Decorative polyurethane floor and wall coat.

X-Tech UralFloor Ht, Screed Grade Applied to concrete

TAL X-Tech UralFloor Ht, Screed Grade application  to concrete  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Specialised Building Products | Cemcrete | Coatings, Repairs, Mortars

Specialised building products by Cemcrete is a variety of products for building needs from coatings to colourd mortar mix, to prep products and repairs.

Turnstar | Product Brochure

Products manufactured by Turnstar include a full range of turnstiles, speedgates, revolving doors, man-trap cubicles, vehicle barriers, high security spike barriers and anti-terror rising bollards & road blockers.

Concrete Primer | Cemcrete | Modified Latex Liquid Cement Primer

Concrete primer is a modified latex liquid primer for concrete floors. To be used on wood floated (rough) and porous surfaces, ensuring a good bond onto the substrate. Dense, impervious surfaces should be ground to expose the surface pores and to create a relatively flat and level surface.

Water-Repellent Cement Datasheet

Water-Repellent Cement for use in place of ordinary Portland cement to overcome capillary absorption of moisture into cement mortar, cement plaster and concrete. It is a premium 52,5N Portland cement ideal for a broad range of applications in the construction, building, swimming pool, precast, decorative and ready-mix industries.

X-Tech EpoxyFloor SL1 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL1 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1 to 1.5mm thick.

EIFS Basecoat | Cemcrete | Coating to Level or Repair Vertical Surfaces

EIFS BaseCoat is a special mixture of various admixtures and Ordinary Portland Cement for repair of concrete and masonry, adhering and surfacing of EIFS Insulation boards prior to applying Cemcrete’s decorative coatings.

Colour Hardener Sealer Datasheet

A non-yellowing clear, thermoplastic acrylic lacquer-based resin which displays excellent UV stability. Has very fast solvent release, i.e. drying properties. The sealer greatly enhances the colour and protects the surface from the ingress of dirt and grease.

CemBond Datasheet

CemBond Datasheet – contains resin with exceptional adhesive qualities. It has been proven over the past couple of decades to be a reliable general-purpose adhesive for the building and decorative industry.

Release Agent Pigmented | Coloured powder release agent | Cemcrete

Release Agent Pigmented to be used in conjunction with Colour Hardener to provide colour contrast and ensure that the mould releases cleanly when imprinting the surface of Colour Hardener. It may also be used in conjunction with DecoCrete, SatinCrete and CemPlaster when imprinting is done.

VIP QUICK FLOOR | Superior Floorings Concept - Over Night | abe

VIP QUICKFLOOR® SUPERIOR FLOORINGS CONCEPT – OVER NIGHT! Less downtime – more profits! It`s not that complicated.

X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls

TAL – X-Tech EpoxyAqua 100, water dispersed epoxy coating for floors and walls application  guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information  is a summary intended for guidance only.

ElastoBond Datasheet

ElastoBond Datasheet – is a liquid polymer to be mixed with Cemcrete’s MatCrete powder to create a tough, flexible, UV resistant waterproofing membrane. Applied by brush, ElastoBond & MatCrete mixture possesses excellent flexibility, crack-bridging properties and UV resistance which allows it to be left exposed and subjected to light foot traffic

X-Tech IntegraFloor Quartz, General Use

TAL -X-Tech IntegraFloor Quartz, application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Screedmaster

TAL Screedmaster is a single-component high-performance self-levelling and smoothing Underlayment Compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates. Designed with high flow properties, when added to water it produces a smooth, flexible and hard wearing floor surface prior to the fixing of floor coverings with minimum installation time.

CemWash Datasheet

CemWash Datasheet – A two-coat decorative, coloured, waterproof cement finish; supplied as CemWash first coat (grey) and CemWash topcoat (coloured). Having a base of Portland cement, it sets rock-hard, is UV resistant, economical and extremely durable. It is supplied in powder form requiring the addition of a CemBond/water solution for the application of the CemWash first coat (grey) and clean water for the application of the CemWash topcoat (coloured). The purpose is to provide a tough, waterproof, durable cement-based coating directly to brick, block or hard cured plaster walls.

Anchor Grout Datasheet

Anchor Grout is a rapid set ready-for-use (merely add water) Portland cement-based grouting compound. It contains chemical reagents which prevent shrinkage during curing.

Concrete Hardener | Surface treatment for porous concrete | Cemcrete

Concrete hardener surface treatment for porous concrete. A clear ready-to use chemical compound which, on being applied to the floor is absorbed.

Fundermax - Max Resistance | EC Laridon

Max Resistance2 combines the very best intrinsic qualities: extreme resistance to the most aggressive chemicals, natural strength, long lasting durability, and an easy-to-clean surface. What’s more, it opens up new design possibilities.

X-Tech CrystalClear | TAL

TAL -X-Tech CrystalClear, installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

X-Tech EpoxyFloor SL2 Abrasion and chemical resistant self-leveling epoxy floor

X-Tech EpoxyFloor SL2 is a three component, self smoothing epoxy floor topping that produces an extremely dense, durable, abrasion and chemically resistant floor. It can be supplied either with a pigmented base or with a neutral color base with separate color pack. It can be used at 1.5 to 3mm thick.

Silicones, Sealants, Adhesives | abe | Product Selector

Silicones, sealants and adhesives for expansion and contraction joints, fire-resistant, sealing, glazing and other civil engineering works.

Kaytech | Sealmac® Dam Lining System

This economical easy-to-apply dam lining system is the answer to all your water retaining requirements. Constructed using Sealmac and impregnated with 3 coats of a mineral-filled latex emulsion sealing compound, it provides a robust, highly elastic bitumen coating that is nontoxic and impervious to water.

abe® VIP Germany | Coating Deep Freeze Transtport Boxes for Overath - Lohmar

An internationally renowned Maker of Transport Boxes was searching for a system, to make foamboxes more resilliant longterm and to make them suitable for deep freeze storage. For this reason our applicator Rüdiger Schmidt advocated QuickSpray Industrial W, a 100% pure 2K Polyurea Hotspray System, with WRAS drinking wate certificate, to coat the finished boxes.

Decorative and Functional Cement and Resin Flooring Range | TAL

  TAL’s decorative cement and resin flooring range  for residential and industrial floors.

X-Calibur® High Performance Epoxy Floor Systems

TAL’s X-Tech Epoxy floor systems including: X-Tech EpoxyAqua 100 – High performance wall and floor coating for concrete, X-Tech EpoxyFloor SL – Abrasion and chemical resistant self-leveling epoxy floor, X-Tech EpoxySeal FLR100 – High performance sloven free floor coating for concrete, X-Tech Epoxy TF Abrasion and chemical resistant self leveling epoxy floor screed.

RenoCrete | Cemcrete | Spray-on textured floor overlay

RenoCrete is a pre-coloured spray-on cementitious based polymer modified 2-part concrete resurfacing system. RenoCrete beautifies existing concrete surfaces while achieving good compressive, tensile and flexural strength with good abrasion resistance; while creating a textured slip-resistant decorative surface.

Sikalastic-560

Sikalastic-560 Premium Waterproofing Solution Co-Elastic Technology (CET)

Installation Materials Essential for the Preparation of Soft Floor Coverings

TAL’s Comprehensive range of tools and materials for the preparation of soft floor coverings.

VIP Germany Project | Park Deck Coating for Consolvo Oslo

The Management Company of a Moose Park outside Oslo, wanted to protect their existing Parking garage with 3 decks to ensure a water tight system that would prevent leakages on the lower decks, and also offer a high degree of surface protection against wear and tear, paired with ease of cleaning.  Quickspray Industrial slow, a slow set floor coating, designed for flooring operations that need a flat result without dry overspray was used.

RoofSeal Datasheet

The RoofSeal Acrylic system embraces a primer/bonding coat, an impregnating RoofSeal coat, a very tough spun bonded polyester membrane, a second impregnating RoofSeal coat and, when all work is dry (minimum 3 days), a final RoofSeal coat. RoofSeal is waterproof, very durable and ultra-violet light resistant.

X-Tech EpoxyFloor TF Abrasion and chemical resistant epoxy floor screed

X-Tech EpoxyFloor TF is a three component, trowel applied epoxy floor screed that produces an extremely dense, durable, abrasion and chemically resistant floor. A fast cure grade is available that can accept pedestrian traffic after 3h at 25C and vehicular traffic after 4h at 25C.

abe® VIP Germany | Coating Field Joint Seals for Conoco Phillips - Weybridge

The customer Conoco-Phillips from Weybridge in Surrey wanted to protect the field joint connectors made from steel and GRP plastic with a tough, water-vapour-tight, sea water proof and highly abrasion resistant coating. VIP advised the use of QuickSpray Industrial to their approved applicator PPC from Keighley. After shotblasting the steel, the connectors were masked off. Then the steel surface was cleaned, afterwards primed with the QuickPrime 1K universal PU primer for superior bond to the substrate and than coated using a Gaco Reaktor HX-P2 hotspray machine. A film thickness of at least 3mm throughout was achieved easily and after just 1 hour the connectors were prepared for shipping on site.

a.b.e DIY Brochure | DO-IT-YOURSELF - coating, grouting, repair, sealing

a.b.e DIY Brochure – DO – IT – YOURSELF, grouting, coating, waterproofing and repairs.

ColourCem Datasheet

ColourCem Datasheet ColourCem is a milled blend of white or grey Portland cement and selected compatible pigments. Strengths are similar to those of Portland cement, but if dark shades are required, up to 10% more ColourCem should be used for a given strength.

Kaytech | Concrete Canvas | Geosynthetic Cementitious Composite Mats

Concrete Canvas is part of a class of construction materials called Geosynthetic Cementitious Composite Mats (GCCMs). It is a flexible, concrete impregnated fabric that harden on hydration to form a thin, durable, waterproof and fire-resistant concrete layer. It is used in channel lining, slope protection, bund lining, remediation of existing concrete structures, and culvert lining.

MultiPurpose Water-Based Sealer Datasheet | Cemcrete

MultiPurpose Water-Based Sealer Datasheet provides a tough, durable, flexible, clear coating on vertical surfaces of concrete, cement plaster and masonry.

Pool Crack Filler Datasheet | Cemcrete

pool crack filler datasheet – A heavily fibre-reinforced flexible paste which, after being allowed to dry, remains flexible under water.

X-Shield SF Primer, General Use

X-Shield SF Primer installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

Direct-To-Metal Paint | Cemcrete | New or weathered metal paint

Direct-To-Metal Paint is a primer & topcoat in one. It is a high-performance metal primer & topcoat with anti-corrosive pigments that prevents rust.

Permastop | Cemcrete | Crystalline waterproofing treatment

Permastop is a Crystalline waterproofing treatment. A cement-based mixture containing chemicals which combine with the water in cement and migrate into the concrete or cement plaster thereby effectively waterproofing the structure against hydrostatic pressure. For slurry coatings and plugging holes. For solving most types of waterproofing problems in belowground and water-containing structures that contain OPC.

DecoCrete | Cemcrete | Shapeable textured plaster

DecoCrete Shapeable textured plaster. A coloured, cement-based material formulated to be plastered to excessive thicknesses but does not slide or shrink and dries rock-hard. A textured shaping system for the creation of artistic finishes, such as rock features, imitation brick walls and pool copings.

Colour Hardener-Power Floated Datasheet

Colour Hardener-Power Floated Datasheet A granolithic concrete material that is power floated into fresh topping or concrete which colours, and creates durable and trafficable surfaces for commercial concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, light fast pigments and certain additives which set rock-hard and which has exceptional abrasion resistance. Some cement floor finishing experience is required for the success of this application.

MatCrete | Cemcrete | Reinforced concrete waterproof lining

Waterproof cement lining that can be applied directly onto hard compacted soil for the cost-effective creation of any water-containing structures such as fish ponds, water channels, dams, drinking troughs, relining of pipes, repair of old cracked reservoirs, flat roof waterproofing, parapet waterproofing etc.

SikaTop Seal-107 ZA

SikaTop® Seal-107 is a two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. SikaTop® Seal-107 complies with the requirements of EN 1504-2 as protective coating.

Product Offering | a.b.e Construction Chemicals - segment manual

Product Offering – Innovative Construction Chemical Solutions for the built environment. – silicones, sealants & adhesives – Waterproofing – General Construction – Concrete Repair & Protection – Flooring – High-Performance Coating Solutions

FiniSafe | Concrete finishing aid

Chryso FiniSafe concrete finishing aid lubricates concrete surface for a faster, easier and better finish. Extends workability of concrete surface.

Sikagard - 550 W Elastic

Sikagard®-550 W Elastic is a one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C. Sikagard®-550 W Elastic complies with the requirements of EN 1504-2 as protective coating.

X-Tech AntiStatic SLB

X-Tech AntiStatic SLB is a three layer breathable system comprising a water dispersed primer, a water dispersed epoxy base coat and a water based self smoothing epoxy top coat that produces a conductive or dissipative floor. When used with X-Tech Conductive Base Coat the floor will have a point to point resistance and a resistance to ground of between 5 x 104 to 1 x 106 Ohms. When used with X-Tech Dissipative Base Coat the floor will have a point to point resistance and a resistance to ground of between 5 x 106 to 1 x 109 Ohms.

dura ® proof cem block

dura. ® proof cem block is a powdered waterproofing admixture that when added to Portland cement plaster or mortar mixes obstructs the capillaries and restricts moisture movement.

CreteCote | Cemcrete | Thin Skim-On Floor Coating

CreteCote is a thin skim-on floor coating. A coloured, thin-film cement-based floor covering which is versatile and durable. It is a two coat system which produces a 1.6mm smooth decorative finish ideal for internal domestic renovations. Comes complete with powder and catalyst as a twin pack.

Terrace Urban Tile Collection

Introducing Terrace Urban Collection from Johnson Tiles. Soft natural stone cement mix design glazed ceramic tile in grey, beige and blue/grey.

Soundseal: Sound Absorption | Sondor

Soundseal – A glass cloth covered Polyurethane foam for acoustic applications. Soundseal has excellent sound absorption properties. It can be used on curved or flat surfaces and is easily converted for irregular shapes. Soundseal is ECB certified.

X-Shield SF Primer High performance primer for epoxy coating and floor systems

X-Shield SF Primer is a high penetration primer suitable for use with a wide range of epoxy coatings and floor systems.

Union Tiles Bamboo Flooring

Each solid bamboo plank is made up of multiple individual pieces of bamboo pressed together to form a plank with varied direction and grain density. Bamboo is an environmentally friendly, renewable resource. Harvested with minimal impact on its natural environment, bamboo returns to maturity in as little as five years, making it the ultimate ecologically responsible flooring alternative. Bamboo flooring is pre-finished and therefore requires no sanding or varnishing upon installation. Its protective finish consists of multiple layers of UV resistant aluminium oxide and polyurethane coatings…

Liquid Waterproofing Membrane | abe proof liquid membrane

Liquid waterproofing membrane abe.®proof liquid membrane is a single pack, solvent borne, rubberised, liquid applied waterproofing membrane that is highly elastic and durable, requiring low maintenance.

X-Tech EpoxyFloor SL1 applied on to X-Prime MT100

TAL -X-Tech EpoxyFloor SL1 applied on to X-Prime MT100 application guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

CHRYSO® Company Profile

Chryso Corporate Brochure and Company Profile. For all cement and concrete additives, waterproofing, flooring and other construction projects.

CHRYSO® | Colour range

CHRYSO® Colour range Added value for concrete. Colours C range of mineral pigments and its on-demand colour creation service.

X-Tech IntegraFloor Emery, General Use

TAL – X-Tech IntegraFloor and Emery  installation guidelines. X-Calibur provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.

BeadCrete | Cemcrete | Unique pool plaster containing glass beads

Unique pool plaster containing glass beads A unique glass beaded decorative pool plaster for use on reinforced concrete pool interiors. The pure glass beads in BeadCrete produce a reflective surface that enhances water sparkle.

Concrete Repair & Protection | a.b.e construction chemicals | Product Selector

Concrete Repair and Protection: Crack injection, smoothing imperfections, primers/adhesives, protective coatings, and repair mortars.

CreteStain Datasheet

cretestain datasheet An acid-based mixture containing special chemicals which reacts with the cement/concrete to colour the surface.

Lonza | Wood Preservative Treatment Guarantee

For your peace of mind, Lonza Wood Protection offers a comprehensive wood preservative treatment guarantee on Tanalised™ and Vacsol™ wood preservative treated products against wood borer, termites and wood rot. The guarantee is offered on timber and poles that that have been pressure treated with Lonza wood preservatives…

Khozi Coat | Cemcrete - cost effective wall coatings

Cemcrete’s Khozi Coat is a one coat PVA acrylic paint suitable for interior and exterior surfaces. It is alkali resistant and is designed as a one-coat application for existing or newly plastered surfaces, cement bricks or building blocks.

X-Tech DeckCoat CP Polyurethane anti-skid car park coating system

X-Tech DeckCoat CP is multi layer high performance, flexible polyurethane anti-skid car park coating system comprising a primer, anti-skid coat and aliphatic polyurethane top coat.

Countertop Mix | Cemcrete | Concrete Countertop Pre-Casting Mix

Countertop Mix is a 3 component pre-casting mix that contains a proprietary blend of cements, and other admixtures to produce a high strength countertop.

Colour Hardener | Cemcrete | Dry-shake screed floor finish

Dry-shake Screed Colour Hardener – A granolithic concrete material that is floated into fresh screed or concrete which colours, strengthens and creates durable surfaces for concrete floors. It is a special blend of cement incorporating very hard-wearing aggregates, lightfast pigments and additives which set rock-hard.

Pool Coating | Brush-on cement-based pool paint | Cemcrete

Brush-on cement-based pool paint A cement-based coating which can be applied easily and quickly using a paint brush. Pool Coating is intended to revitalise your old, pitted, dirty pool plaster as an alternative to re-plastering. It must be noted that Pool Coating is a once-off application.

X-Tech UraFloor TF Heavy duty polyurethane screed and mortar

TAL – X-Tech UraFloor TF is a heavy duty polyurethane based floor screed and mortar designed to provide excellent resistance to abrasion, chemical attack and thermal shock.

X-Calibur® X-Tech SuperFlow

TAL’s  X-Tech SuperFlow is suitably designed for application onto concrete substrates. Allow all new concrete work and screeds to cure for at least 6 weeks and 4 weeks respectively before proceeding. The substrate must be structurally sound, clean and dry and free from all traces of surface laitance and contamination such as dust, dirt, waxes, oils, bitumen, old adhesives, paint, grease, weak cement screeds, shutter release and curing agents, sealing compounds, etc. All damaged, defective, deteriorated, friable (powdery) and hollow sounding areas must be removed until a solid background is achieved. These areas must be made good before proceeding.  The surface must be prepared, by captive blasting or grinding, to ensure that the aggregate in the concrete is fully exposed and open, ie to achieve a Concrete Surface Profile (CSP) of 5 or 6 (Medium Scarification).

X-Tech CrystalClear Solvent free clear coating, sealer and binder

TAL X-Tech CrystalClear is a clear high performance, solvent free, epoxy coating/sealer and is also suitable for use as a binder and sealer for decorative floor systems.

High Performance Coating Solutions | VIP German Technology

VIP`s innovative technologies provide superior surface protection against abrasion, impact, corrosion and chemical attack. In addition our new technology, instant curing spray applied membranes offer significant benefits and advantages over traditional waterproofing and water containment solutions…

Tranquil Insect Screen

The Crealco Tranquil sliding insect screen for doors offers the perfect fusion of style and functionality in both residential or commercial space.

X-Tech AntiStatic SLE applied to new concrete using X-Shield SF Primer or MT Primer

Method Statement on how to apply TAL X-Tech AntiStatic SLE to new concrete using X-Shield SF Primer or MT Primer.

PrimerCote | Cemcrete | Tough adhesive for new screeds

PrimerCote is a tough adhesive for new screeds, No dilution required, needs to be mixed with Cemcrete’s FlexBond, Will ensure screed adheres to substrate

Sika Technology and Concepts for Roofing

Sika roofing solutions for exposed roofs, gravel ballasted roofs, green roofs, utility roofs, special roof designs, refurbishment of bitumen roofs, refurbishment of metal roofs, refurbishment of polymeric roofs…

Concrete Densifier Datasheet

Concrete Densifier Datasheet is designed to densify, harden, dust-proof and increase the abrasion resistance of concrete and cement coatings.


Copyright © 2021 New Media, a division of Media24. All rights reserved.